Our in-house experts typically reply within one business day.
Rugged Liner
Verify Fitment
Select your vehicle to confirm this part fits.
2021 - 2026 Ford F-150
Confirmed to Fit
2022 - 2026 Ford F-150 Lightning
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Looking for the ultimate truck bed protection? Our Rugged Liner Bedliner is engineered with the thickest design in the industry to deliver exceptional durability, superior skid resistance, and a custom fit for your truck. Made from high-density polyethylene, this truck bed liner ensures maximum impact resistance while providing a non-pooling, skid-resistant surface that keeps your gear secure and your truck bed looking pristine.
Enhance your trucks protection with the Rugged Liner Bedliner the top choice for durability, secure storage, and a perfect custom fit. Upgrade your truck bed today and experience the toughest, most reliable bedliner on the market!
Load Specs
Rugged Liner manufactures American-made truck bed protection: under-rail and over-rail bed liners, hard folding and tri-fold tonneau covers, and wheel well liners. Liners are moulded to exact bed dimensions for a specific make, model and bed length rather than trimmed to fit, using high-density polyethylene and reinforced composites that resist cracking under load.
Rugged Liner was founded on the premise that truck bed protection should be as tough as the trucks it goes into. The company began manufacturing bed liners and tonneau covers in the United States after seeing too many products fail under genuine working conditions, and it still controls every step of production rather than outsourcing. Its customers are people who use a pickup rather than commute in one: contractors hauling equipment, landscapers, farmers, and owners loading gear for the weekend.
The core product is the truck bed liner, offered in under-rail and over-rail configurations. Each one is moulded to the exact dimensions of a specific make, model and bed length, so it drops in without universal approximations, gaps at the bulkhead or trimming at the wheel arches. The material is high-density polyethylene with reinforced composite construction, chosen because it absorbs impact instead of transmitting it, which is what keeps a liner from cracking when a pallet of block lands in the bed or when temperatures swing from summer heat to a hard winter freeze.
The range grew outward from there in response to what truck owners asked for. Tonneau covers include the E-Series hard folding covers and the HC3 premium hard fold, both built for a weather-tight seal and secure closure, along with tri-fold and soft folding cover options for owners who want lighter weight and easier removal. Wheel well liners shield the inner arches from stone chips, road salt and the rust that follows.
Manufacturing standards are the brand's stated reason for existing. Every bed liner, tonneau cover and wheel well liner is produced in the United States under controlled quality processes, and the company continues to refine materials, fitment tolerances and installation systems across the lineup.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime
2 compatible vehicles
| Year | Make & Model | Bed | Notes |
|---|---|---|---|
| 2021 - 2026 | Ford F-150 | 5'7" Bed | Hardware Tailgate Cover Comes with Bedliner Under Rail Bedliner Pro Power Onboard: With Pro Power Onboard |
| 2022 - 2026 | Ford F-150 Lightning | — | Hardware Tailgate Cover Comes with Bedliner Under Rail Bedliner Pro Power Onboard: With Pro Power Onboard |
The 21-25 F-150 5'7" (Includes Lightning) Bed - Rugged Liner Under Rail Bedliner w/ Pro Power Onboard F55U21 (Part #BHMRF55U21) is designed for 5'7" bed trucks. Check the fitment chart for your specific Ford F-150 configuration.
The 21-25 F-150 5'7" (Includes Lightning) Bed - Rugged Liner Under Rail Bedliner w/ Pro Power Onboard F55U21 (Part #BHMRF55U21) fits the following vehicles: 2021-2025 Ford F-150; 2022-2024 Ford F-150 Lightning. Always verify your specific year, make, and model before ordering.
The 21-25 F-150 5'7" (Includes Lightning) Bed - Rugged Liner Under Rail Bedliner w/ Pro Power Onboard F55U21 (Part #BHMRF55U21) fits 2021-2025 Ford F-150 models. The 2025 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 21-25 F-150 5'7" (Includes Lightning) Bed - Rugged Liner Under Rail Bedliner w/ Pro Power Onboard F55U21 (Part #BHMRF55U21) is designed to fit the 2021-2025 Ford F-150.
The 21-25 F-150 5'7" (Includes Lightning) Bed - Rugged Liner Under Rail Bedliner w/ Pro Power Onboard F55U21 (Part #BHMRF55U21) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the LIK75 kit is designed for the 2021 Ford F150. The manual does not specify compatibility with other model years or F150 variants, so confirm your vehicle year before purchasing.
The manual confirms fitment for 2021 Ford F150 only. Compatibility with other model years is not stated in the instructions.
The kit includes: (A) 1 bedliner, (B) 1 tailgate cover, (C) 8 spacers, (D) 3 round 4-inch hole covers, and (E) 2 push pins. The factory screws removed during installation are reused and should be saved.
You need a screwdriver with T20 Torx bit (for steps 3–5) and a utility knife (for step 7). No other power tools or specialized equipment are mentioned as required.
Yes. A screwdriver with a T20 Torx bit is required in steps 3–5 to remove and reinstall the factory screws on the tailgate access plate and driver side rear cleat.
A utility knife is used in step 7 to cut out tabs in the bedliner that hold partially cut areas for the optional power panel and tie-down access holes. This step is only required if your truck is equipped with these optional features.
Clean all areas of the cargo box thoroughly and ensure they are free of debris before starting installation. This preparation is important for proper fit and finish.
Yes, one person can perform the installation, but Rugged Liner recommends a two-person installation for easier handling.
Step 1 is to remove the 8 factory screws from the metal access plate attached to the tailgate using a T20 Torx screwdriver. Save these screws, as they will be reused in step 4.
Center the pre-drilled holes of the tailgate cover (B) onto the metal tailgate. Place one spacer (C) in each of the 8 holes, then reinstall the factory screws you removed in step 3. The spacers ensure proper clearance between the cover and tailgate.
The 8 spacers (C) are placed in the pre-drilled holes of the tailgate cover before reinstalling the factory screws. They provide proper spacing between the tailgate cover and the metal tailgate.
In step 5, use a T20 Torx screwdriver to remove the fasteners holding the driver side rear cleat. Save both the cleat and fasteners, as they will be reinstalled in step 6.
The 2 push pins (E) are installed in the pre-drilled holes located behind the D-pillar (the part that stops the tailgate when you close it). One push pin goes on each side.
In step 6, locate the pre-drilled holes on the bottom area behind the D-pillar on the driver side and reinstall the cleat using the screws saved in step 5.
If your truck is equipped with the optional power panel (1) or tie-downs (2, 3, 4, 5), you must cut out the tabs in the bedliner that hold the partially cut areas before dropping the bedliner into place. Use a utility knife for this step.
Drop the bedliner (A) straight down, then push the side walls under the truck side rails. Make sure the center locking column on each side is fully engaged under the rail lip.
The center locking column on each side of the bedliner engages under the rail lip of the truck to secure the bedliner in place. During installation, ensure both locking columns are fully engaged under the rail lip.
The 3 round 4-inch hole covers (D) are installed in the tie-down access holes on the bedliner. They cover the openings after installation.
Clean the bedliner with soap and water to protect its finish. Do not use abrasive substances, as these can damage the product.
Use only soap and water. Do not use abrasive substances, as they will damage the finish.
Call Rugged Liner at 800-433-3604. Any required parts will be shipped to you directly. Do not return the whole kit to the store.
On Sale Today
Original price was $449.99. Current price is $399.99.You save $50.00 (11%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Sep 6 - Wed, Sep 9
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.