Our in-house experts typically reply within one business day.
UWS
Verify Fitment
Select your vehicle to confirm this part fits.
2009 - 2010 Dodge Ram 1500
Confirmed to Fit
2009 - 2010 Dodge Ram 1500
Confirmed to Fit
2019 - 2026 Ram 1500
Confirmed to Fit
2019 - 2026 Ram 1500
Confirmed to Fit
2019 - 2026 Ram 1500
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Free Shipping
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Finish: MATTE BLACK POWDER COAT
Material: Aluminum
Part Type: Crossover
UWS crossover truck tool boxes are the tried-and-true way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is built from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. To add even more strength to the crossover truck tool box, the lid features our patented RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent bending and warping and to ensure smooth opening and closing. The lid is able to open to a full 90 degrees, providing better access to tools, equipment and other stored items. It also features self-opening struts to make it easy to open the box when your hands are full. This particular truck tool box features a low profile, meaning the lid is built lower than our standard lid. This provides a better view out the rear cab window and additional clearance for other items in the truck bed, if needed. To keep out moisture, dirt and even insects, the lid is also fitted with a MicroSeal gasket that seals off the inside of the tool box from the outside elements. UWS crossover truck tool boxes make it easy to keep your tools and other items organized, featuring a three-compartment sliding tool tray. The tool box itself is easy to install and is available in multiple sizes to provide the perfect for your truck and lifestyle. Like all UWS products, each crossover truck tool box is proudly assembled right here in the USA for style and long-lasting dependability (NOTE: This product is heavily packaged for parcel shipping).
UWS designs and builds heavy-duty truck tool boxes and storage for tradespeople and truck owners. The line covers crossover and side-mount boxes, chest boxes, underbody boxes, transfer tanks and dog boxes. Every aluminum box is designed, fabricated and welded in Perry, Florida, with construction aimed at job-site abuse, road vibration and daily use.
UWS is a leading manufacturer and designer of truck tool boxes and truck accessories, and a Lippert brand. The company's focus is narrow and deliberate: storage that stands up to being opened and slammed shut dozens of times a day, loaded past what looks reasonable, and left outdoors in whatever weather the job brings. Its customers are electricians, plumbers, contractors, farmers, outdoorsmen and truck owners who treat a pickup as a working tool rather than transport.
The catalog covers the full range of bed storage. Crossover boxes sit across the bed behind the cab in single-lid, gull-wing, secure-lock and low-profile styles, so there is a fit whether the priority is capacity, rear visibility or working under a tonneau. Side-mount boxes mount along the bed rails and keep the bed floor free for cargo, while underbody boxes tuck beneath the frame rails of service bodies and flatbeds.
Beyond the bed, UWS makes portable chest boxes that move between vehicles and the shop, transfer tanks and combination tank-and-toolbox units for crews working away from fuel supply, and insulated, ventilated dog boxes for hunters and handlers.
Manufacturing sits at the centre of the brand's identity. Every UWS aluminum tool box is designed, fabricated and welded in Perry, Florida, by tradespeople with decades of experience, and the company's Rooted in Trades initiative is built around that connection to skilled manual work. Boxes use heavy-gauge aluminum, continuous welds at the seams, weather stripping to seal against rain and dust, and locking systems intended to resist tampering. The practical result is storage that keeps tools dry, organized and where they were left.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
UWS | Tough. Reliable.
22 compatible vehicles
| Year | Make & Model | Style | Bed | Notes |
|---|---|---|---|---|
| 2019 - 2026 | Chevrolet Silverado 1500 | Crew Cab Pickup | 5'10" Bed | — |
| 2004 - 2018 | Chevrolet Silverado 1500 | Crew Cab Pickup | 5'9" Bed | — |
| 2007 | Chevrolet Silverado 1500 Classic | Crew Cab Pickup | 5'9" Bed | — |
| 2022 | Chevrolet Silverado 1500 LTD | Crew Cab Pickup | 5'10" Bed | — |
| 2009 - 2010 | Dodge Ram 1500 | Crew Cab Pickup | 5'7" Bed | If your model is equipped with a RamBox, a crossover tool box will not fit. |
| 2009 - 2010 | Dodge Ram 1500 | Extended Cab Pickup | 5'7" Bed | If your model is equipped with a RamBox, a crossover tool box will not fit. |
| 2009 - 2010 | Dodge Ram 1500 | Standard Cab Pickup | 5'7" Bed | — |
| 2004 - 2008 | Dodge Ram 1500 | Crew Cab Pickup | 6'4" Bed | — |
| 2002 - 2003 | Dodge Ram 1500 | Crew Cab Pickup | 6'6" Bed | — |
| 2011 - 2016 | Ford F-250 Super Duty | Crew Cab Pickup | 6'10" Bed | — |
| 2011 - 2016 | Ford F-250 Super Duty | Extended Cab Pickup | 6'10" Bed | — |
| 2011 - 2016 | Ford F-250 Super Duty | Standard Cab Pickup | 6'10" Bed | — |
| 2011 - 2016 | Ford F-350 Super Duty | Crew Cab Pickup | 6'10" Bed | — |
| 2011 - 2016 | Ford F-350 Super Duty | Extended Cab Pickup | 6'10" Bed | — |
| 2011 - 2016 | Ford F-350 Super Duty | Standard Cab Pickup | 6'10" Bed | — |
| 2019 - 2026 | GMC Sierra 1500 | Crew Cab Pickup | 5'10" Bed | — |
| 2004 - 2018 | GMC Sierra 1500 | Crew Cab Pickup | 5'9" Bed | — |
| 2007 | GMC Sierra 1500 Classic | Crew Cab Pickup | 5'9" Bed | — |
| 2022 | GMC Sierra 1500 Limited | Crew Cab Pickup | 5'10" Bed | — |
| 2019 - 2026 | Ram 1500 | Crew Cab Pickup | 5'7" Bed | If your model is equipped with a RamBox, a crossover tool box will not fit. |
| 2019 - 2026 | Ram 1500 | Extended Cab Pickup | 5'7" Bed | If your model is equipped with a RamBox, a crossover tool box will not fit. |
| 2019 - 2026 | Ram 1500 | Crew Cab Pickup | 6'4" Bed | If your model is equipped with a RamBox, a crossover tool box will not fit. |
The UWS Matte Black Aluminum 69" Deep Angle Tool Box, Low Profile (Heavy Packaging) EC10783 (Part #BHSGEC10783) fits the following vehicles: 2004-2026 Chevrolet Silverado 1500; 2007 Chevrolet Silverado 1500 Classic; 2022 Chevrolet Silverado 1500 LTD; 2002-2010 Dodge Ram 1500; 2011-2016 Ford F-250 Super Duty; 2011-2016 Ford F-350 Super Duty; 2004-2026 GMC Sierra 1500; 2007 GMC Sierra 1500 Classic; 2022 GMC Sierra 1500 Limited; 2019-2026 Ram 1500. Always verify your specific year, make, and model before ordering.
Yes, the UWS Matte Black Aluminum 69" Deep Angle Tool Box, Low Profile (Heavy Packaging) EC10783 (Part #BHSGEC10783) is designed to fit the 2004-2026 Chevrolet Silverado 1500.
The UWS Matte Black Aluminum 69" Deep Angle Tool Box, Low Profile (Heavy Packaging) EC10783 (Part #BHSGEC10783) fits 2004-2026 Chevrolet Silverado 1500 models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
The UWS Matte Black Aluminum 69" Deep Angle Tool Box, Low Profile (Heavy Packaging) EC10783 (Part #BHSGEC10783) fits both short bed and long bed configurations. Check the fitment chart for your specific Chevrolet Silverado 1500 configuration.
The UWS Matte Black Aluminum 69" Deep Angle Tool Box, Low Profile (Heavy Packaging) EC10783 (Part #BHSGEC10783) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The package includes one crossover truck tool box, one key, two rail pads, two 3-inch J-hooks, two 1/4" washers, and two 1/4" nuts. A divider tray is included with some models but not all. Check your specific package contents against the parts list.
The manual does not specify which vehicle models, bed lengths, or cab styles are compatible with this tool box. Contact CURT Group at 877-287-8634 or consult your dealer to confirm fitment for your specific truck before purchasing.
You must check clearance during installation. In Step 1, open the tool box lid and ensure there is clearance between the open lid, top and back of the cab. If clearance is insufficient, the tool box may not be suitable for your truck configuration.
You will need a ratchet, socket set, and tape measure. These are the only tools listed as required for installation.
The manual does not explicitly state whether drilling is required. However, it includes a warning to check under your truck before drilling to ensure you do not puncture brake lines, fuel lines, electrical wires or fuel tanks. Contact the manufacturer at 877-287-8634 to confirm whether your installation requires drilling.
Place the tool box in the truck bed and use a tape measure to ensure it is centered. Attach the adhesive side of the rail pads to the underside of the tool box ends, then place the tool box with the rail pads on top of the truck bed rails. Open the lid and verify there is clearance between the open lid and the top and back of the cab.
Place a J-hook under the lip of the bed rail and insert the threaded end up through the slot. Use only one hole and J-hook assembly on each side. Attach with a washer and nut, snug the hardware but do not fully tighten yet. Repeat on the other side. Re-measure to ensure the tool box is centered and allows lid clearance when open, then fully tighten all hardware.
The torque specification for 1/4" bolts is 3 ft-lbs. This applies to the 1/4" nuts and washers used to secure the J-hooks. Note that these are general guidelines; if you purchase replacement hardware, use the torque specifications provided with that hardware.
Do not use this product for storing or transporting flammables, explosives, hazardous materials or hazardous waste, such as containers of gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks and cutting torches. Danger of explosion.
The manual states never to exceed the vehicle manufacturer's recommended capacity, but does not specify the tool box's own weight capacity. Contact CURT Group at 877-287-8634 or your dealer for the specific capacity rating.
Yes. The product can reduce the driver's ability to clearly see roadways, vehicular or pedestrian traffic and other objects through the rear and side windows of the vehicle, which may cause an accident. Extra precaution should be taken when driving a vehicle with this product installed.
Ensure all knobs, bolts, screws, straps and locks are firmly secured. Open the tool box lid and verify there is clearance between the open lid and the top and back of the cab. Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue. With the crossover tool box installed, periodic inspections should be performed to ensure all mounting hardware remains tight.
For polished, gloss and other smooth finishes, polish may be used to clear small scratches and scuffs. Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes or other similar products that may damage the finish. Periodically lubricate the strikers and locks to ensure optimum performance. Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue.
If the strikers are ever out of alignment, simply loosen, adjust and re-tighten them. Periodically lubricate the strikers and locks to ensure optimum performance.
Before drilling into your truck bed, check under your vehicle to ensure the drill location does not puncture, cut or obstruct any brake or fuel fluid lines, electrical wires, fuel tanks, etc. Precaution must be taken that all fasteners near the fuel tank do not create the possibility of fuel tank puncture or other damage during a collision.
Yes. Treat or seal all fasteners and exposed metal in any holes drilled in vehicle to prevent corrosion.
The manual does not specify compatible vehicle models or bed lengths. Contact CURT Group at 877-287-8634 or your dealer to confirm fitment for your truck.
You need a ratchet, socket set, and tape measure. No drilling tools are listed as required, but check with the manufacturer to confirm whether drilling is needed for your installation.
Use the two J-hooks, washers and 1/4" nuts provided. Place one J-hook under the lip of each bed rail, insert the threaded end up through the slot, and secure with a washer and nut. Snug first, then fully tighten after confirming the tool box is centered and the lid clears the cab.
Torque 1/4" bolts to 3 ft-lbs. These are general guidelines; if you purchase replacement hardware, use the torque specifications provided with that hardware.
No. Do not store or transport flammables, explosives or hazardous materials such as gasoline, solvents, propane tanks or acetylene tanks. Danger of explosion.
Periodically inspect all mounting hardware to ensure it remains tight. Before every trip, ensure all knobs, bolts, screws, straps and locks are firmly secured. Inspect for signs of wear, corrosion and fatigue.
On Sale Today
Original price was $995.95. Current price is $904.95.You save $91.00 (9%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Perry, FLFREE SHIPPING
Estimated delivery Mon, Aug 10 - Wed, Aug 12
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
