Ask a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
UWS
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Free Shipping
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Finish: CLEAR ZINC
Material: Carbon Steel
Part Type: Misc UWS Replacement Parts
A UWS utility chest box is the perfect solution for keeping your items safe, secure and accessible in your shop, in your home or on the job. This hardware kit allows for easy, secure installation of a UWS chest box.
UWS designs and builds heavy-duty truck tool boxes and storage for tradespeople and truck owners. The line covers crossover and side-mount boxes, chest boxes, underbody boxes, transfer tanks and dog boxes. Every aluminum box is designed, fabricated and welded in Perry, Florida, with construction aimed at job-site abuse, road vibration and daily use.
UWS is a leading manufacturer and designer of truck tool boxes and truck accessories, and a Lippert brand. The company's focus is narrow and deliberate: storage that stands up to being opened and slammed shut dozens of times a day, loaded past what looks reasonable, and left outdoors in whatever weather the job brings. Its customers are electricians, plumbers, contractors, farmers, outdoorsmen and truck owners who treat a pickup as a working tool rather than transport.
The catalog covers the full range of bed storage. Crossover boxes sit across the bed behind the cab in single-lid, gull-wing, secure-lock and low-profile styles, so there is a fit whether the priority is capacity, rear visibility or working under a tonneau. Side-mount boxes mount along the bed rails and keep the bed floor free for cargo, while underbody boxes tuck beneath the frame rails of service bodies and flatbeds.
Beyond the bed, UWS makes portable chest boxes that move between vehicles and the shop, transfer tanks and combination tank-and-toolbox units for crews working away from fuel supply, and insulated, ventilated dog boxes for hunters and handlers.
Manufacturing sits at the centre of the brand's identity. Every UWS aluminum tool box is designed, fabricated and welded in Perry, Florida, by tradespeople with decades of experience, and the company's Rooted in Trades initiative is built around that connection to skilled manual work. Boxes use heavy-gauge aluminum, continuous welds at the seams, weather stripping to seal against rain and dust, and locking systems intended to resist tampering. The practical result is storage that keeps tools dry, organized and where they were left.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
UWS | Tough. Reliable.
The 003-CBOXMK is a CURT mounting kit designed to secure a UWS tool box to the bed of a truck. It includes fasteners and hardware needed to attach the tool box to the truck bed using a drilling and bolting method.
The kit includes 2 flange bolts (M8), 2 flat washers (5/16" rubber bonded), and 2 turn nuts (M8). These fasteners are used to secure the UWS tool box to the truck bed.
You will need a wrench set, a drill, and a 1/2" drill bit. These are the only tools specified as required for installation.
Yes. Before drilling into your truck bed, you must refer to the installation manual included with your UWS tool box for all notices, cautions and warnings. This is a required step before beginning installation.
Yes. You must drill a 1/2" hole in the truck bed at your desired tool box location. This hole is used to insert the turn nut that secures the mounting bolt.
You must drill a 1/2" hole in the truck bed at your desired tool box location.
1. Align your UWS tool box to a desired location in the truck bed. 2. Drill a 1/2" hole in the desired location. 3. Insert a turn nut into the drilled hole. 4. Place a bonded flat washer onto a flange bolt. 5. Gently push the bolt into the turn nut. 6. Once the turn nut rotates, insert the flange bolt fully into the turn nut. 7. Tighten to the torque values specified in the manual.
The M8 flange bolts must be tightened to 7 ft-lbs. This torque value applies unless otherwise noted in the installation instructions.
Periodic inspections should be performed to ensure all mounting hardware remains tight. The manual does not specify the inspection interval, so consult the UWS tool box manual or contact CURT for recommended maintenance schedules.
The 003-CBOXMK is designed to mount UWS tool boxes to truck beds. Consult the UWS tool box manual for specific truck bed compatibility, or contact CURT at 877.287.8634 for fitment confirmation.
Yes. You must drill one 1/2" hole in the truck bed for each mounting point to insert the turn nuts.
You need a wrench set, a drill, and a 1/2" drill bit.
Tighten M8 bolts to 7 ft-lbs.
Yes. Perform periodic inspections to ensure all mounting hardware remains tight.
On Sale Today
Original price was $26.53. Current price is $20.95.You save $5.58 (21%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Aug 9 - Wed, Aug 12
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
