2000 Toyota Tundra #13180 will not fit with towable bumper mount Curt 2", Class 3 Trailer Tow Hitch + 4-flat Wiring Kit 13180CURTIn Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
On Sale Today
Complete CURT Class 3 2" trailer hitch and 4-flat custom wiring kit engineered for the 2000 Toyota Tundra #13180 will not fit with towable bumper mount. Vehicle-specific fit, plug-and-play installation, all hardware and instructions included.
This custom kit fits the following vehicles:
All Hardware and Installation Instructions Included!
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Tundra (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 7,500 lbs. WD and 750 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
CURT custom wiring connectors are the easiest way to outfit your vehicle with a CURT trailer wiring connection. They are built with some of the most advanced technology in the industry, and each one is custom-fitted to work with a specific make and model. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Although this special socket is not equipped on every vehicle, a CURT custom wiring connector -- also called a T-connector -- utilizes the socket for simple, stress-free installation. Rather than requiring you to cut, splice and solder into your vehicle's wiring system, the custom wiring connector uses a single OEM-compatible plug and instantly provides a standard, universal vehicle-to-trailer wiring connection, typically in the form a 4-way flat. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. This particular plug-in connector provides a 4-way flat socket and is designed to be a custom wiring option for certain years of the Toyota Tundra (to verify your vehicle compatibility, see application info). It comes with all necessary hardware to establish a solid connection. It also comes with a dust cover to keep the connector socket clean when not in use. To ensure long-lasting reliability, all CURT custom wiring connectors are thoroughly tested for optimal functionality. Stress is the last thing you should feel when towing a trailer -- whether you're hauling your RV to that favorite camping destination, your ATVs up to the hunting grounds or your fishing boat to the new hidden hotspot. At CURT, we think your towing equipment should add to the enjoyment of your experience, not detract from it.
You save $123.92 (30%)
Free Shipping
Ships free on all orders
Authorized DealerQuick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 29 - Tue, Sep 1
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2000 | Toyota Tundra | #13180 will not fit with towable bumper mount |
The 2000 Toyota Tundra #13180 will not fit with towable bumper mount Curt 2", Class 3 Trailer Tow Hitch + 4-flat Wiring Kit 13184 (Part #CHW-2965) fits 2000 Toyota Tundra models. The 2000 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 2000 Toyota Tundra #13180 will not fit with towable bumper mount Curt 2", Class 3 Trailer Tow Hitch + 4-flat Wiring Kit 13184 (Part #CHW-2965) is designed to fit the 2000 Toyota Tundra.
The 2000 Toyota Tundra #13180 will not fit with towable bumper mount Curt 2", Class 3 Trailer Tow Hitch + 4-flat Wiring Kit 13184 (Part #CHW-2965) fits the following vehicles: 2000 Toyota Tundra. Always verify your specific year, make, and model before ordering.
The 2000 Toyota Tundra #13180 will not fit with towable bumper mount Curt 2", Class 3 Trailer Tow Hitch + 4-flat Wiring Kit 13184 (Part #CHW-2965) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the Curt 13184 is designed for 2000-2006 Toyota Tundra models. It is also compatible with TommyGate equipment.
You will need: 19mm and 3/4" sockets, a 12" extension, a ratchet, a torque wrench, a drill, and a 17/32" drill bit. The torque wrench is essential because fasteners must be torqued to specific values during installation.
Yes, drilling is required. During installation, you must drill a 17/32" hole through the frame using the hitch as a template, through the forwardmost hole of both side plates. A drill and 17/32" bit are included in the required tools.
The kit includes: four 1/2-13 UNC 1-1/2" grade 8 carriage bolts (part 10-10334), ten 0.250 x 1.00 x 1.50" round hole spacers (CM-SP50), six 1/2" lock washers (part 30-00153), four 1/2-13 UNC grade 8 hex nuts (part 20-00171), and two M12 x 1.25 grade 10.9 carriage bolts (part 10-10275).
1. Raise the hitch and align the forward slot in the side plate with the frame weldnut; secure with a CM-SP50 spacer, lock washer, and M12 x 1.25 bolt. 2. Install 1/2-13 x 1-1/2 carriage bolts with spacers and lock washers into the rearmost slots; secure with spacers, lock washers, and hex nuts. 3. Using the hitch as a template, drill a 17/32" hole through the forwardmost holes in both side plates into the frame. 4. Install 1/2-13 x 1-1/2 carriage bolts with spacers and lock washers into the forwardmost holes; secure with spacers, lock washers, and hex nuts. 5. Torque all fasteners to specification.
Torque all M12 hardware to 86 ft-lbs. Torque all 1/2" hardware to 110 ft-lbs. This applies to both the M12 x 1.25 bolts and the 1/2-13 carriage bolts and hex nuts used throughout the installation.
Do not exceed your vehicle manufacturer's recommended towing capacity. The Curt 13184 is rated for specific gross load capacities in both weight-carrying and weight-distribution modes, but those values are not shown on this manual copy. Contact Curt Manufacturing at 877-287-8634 or consult your Toyota Tundra owner's manual for the correct limits.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This is a routine inspection to maintain safe operation.
Yes, the Curt 13184 is compatible with TommyGate.
The Curt 13184 is designed for 2000-2006 Toyota Tundra models and is compatible with TommyGate equipment.
Yes, you must drill one 17/32" hole through the frame using the hitch as a template. A drill and 17/32" bit are required tools.
You need 19mm and 3/4" sockets, a 12" extension, ratchet, torque wrench, drill, and 17/32" drill bit.
Torque all M12 hardware to 86 ft-lbs and all 1/2" hardware to 110 ft-lbs.
Yes, periodically check that all fasteners are tight and structural components are sound. Do not exceed your vehicle manufacturer's recommended towing capacity.
Yes, Curt part number 55367 is designed for the Toyota Tundra. However, the manual does not specify model year range, cab style, bed length or drivetrain compatibility. Verify with the manufacturer or retailer that this part fits your specific Tundra configuration before purchase.
Curt part number 55367 is a T-connector harness for the Toyota Tundra. It connects to the vehicle's factory tow harness and includes a 4-flat connector, power wire with ring terminal, 10 AMP fuse, fuse holder, and cable ties.
The harness includes: a T-connector with 4-flat connector, power wire with ring terminal for battery connection, 10 AMP fuse, fuse holder, and cable ties for securing loose wires.
The manual refers to the factory tow harness as T4 but does not provide its specific location on the Tundra. Consult your vehicle's owner manual or contact a Toyota dealer for the exact location.
1. Locate the vehicle's factory tow harness (T4). 2. Remove the protective cap carefully without damaging the locking tabs. 3. Insert the T-connector harness connector into the vehicle's tow harness connector. 4. Ensure the connectors are fully inserted with locking tabs in place.
Route the 4-flat connector to the center of the vehicle and secure it in a convenient location that is out of the way. Secure any loose wires with the cable ties provided.
1. Locate the vehicle's positive battery terminal in the driver side of the engine compartment. 2. Connect the ring terminal on the power wire to the positive battery terminal. 3. Locate the vehicle's power wire connector in the engine compartment—it will have connection points matching the harness connector. 4. Insert the connector fully with locking tabs in place.
The Curt 55367 uses a 10 AMP fuse. Insert it into the fuse holder included with the harness.
Secure all loose wires with the cable ties provided. Ensure wires are routed away from areas where they may be cut or pinched by moving parts or sharp edges.
Do not damage the locking tabs when removing the protective cap from the factory tow harness connector. Avoid routing wires through areas where they may be cut or pinched by moving parts or sharp edges.
Yes, the Curt 55367 is designed for the Toyota Tundra. Verify your specific model year, cab style and bed length with the manufacturer before purchase.
The manual does not mention drilling. The installation appears to use the factory tow harness connector and battery terminal without modification.
A 10 AMP fuse is required. It is inserted into the fuse holder included with the harness.
Yes. Do not damage the locking tabs when removing the protective cap. Handle the connector carefully to avoid breaking the tabs.
Total for 4 items:
$397.98$524.41
No reviews have been added for this product.