Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Finish | GLOSS BLACK POWDER COAT |
| Main Body Shape | Square |
| Material | Carbon Steel |
| Mount Type Description | Blank |
| Receiver Tube Size | 2 IN |
| Side Application Type Description | Blank |
| Tongue Weight (TW) | 500 LB |
| Warranty | Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
| Weight Carrying Capacity (WC) | 5,000 LB |
| Weight Distribution (WD) | 7,500 LB |
| Weight Distribution Tongue Weight (WDTW) | 750 LB |
| Battery-Powered | Yes |
| Converter Type | Circuit Protected and Powered |
| Electrical System Type | 3W |
| Finish | N/A |
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
| Side Application Type Description | Blank |
| T-Connector Location | T3 |
| Tail Light Circuits | 6.0 Amps |
| Turn and Brake Circuits | 3.0 Amps |
| Warranty | One-Year Limited Warranty |
| Ball Diameter | 2 IN |
| 10282 | Yes |
| Color | Black |
| Drop | 2 IN |
| Gross Trailer Weight (GTW) | 7,500 LB |
| Material | Carbon Steel |
| Receiver Tube Size | 2 IN |
| Shank Diameter | 2 IN |
| Tongue Weight (TW) | 750 LB |
| Truckload Dom Pickup Location | Eau Claire, Wi |
| Warranty | Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
Notes:
Notes:
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
The 00-06 Toyota Tundra #13180 will not fit with towable bumper mount 2 CURT Trailer Hitch + Assure Proportional Brake Controller Kit HBCW2454 (Part #HBCW2454) fits 2000-2006 Toyota Tundra models. The 2006 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 00-06 Toyota Tundra #13180 will not fit with towable bumper mount 2 CURT Trailer Hitch + Assure Proportional Brake Controller Kit HBCW2454 (Part #HBCW2454) is designed to fit the 2000-2006 Toyota Tundra.
The 00-06 Toyota Tundra #13180 will not fit with towable bumper mount 2 CURT Trailer Hitch + Assure Proportional Brake Controller Kit HBCW2454 (Part #HBCW2454) fits the following vehicles: 2000-2006 Toyota Tundra. Always verify your specific year, make, and model before ordering.
The 00-06 Toyota Tundra #13180 will not fit with towable bumper mount 2 CURT Trailer Hitch + Assure Proportional Brake Controller Kit HBCW2454 (Part #HBCW2454) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the Curt 13184 is designed for 2000-2006 Toyota Tundra models. It is also compatible with TommyGate equipment.
You will need: 19mm and 3/4" sockets, a 12" extension, a ratchet, a torque wrench, a drill, and a 17/32" drill bit. The torque wrench is essential because fasteners must be torqued to specific values during installation.
Yes, drilling is required. During installation, you must drill a 17/32" hole through the frame using the hitch as a template, through the forwardmost hole of both side plates. A drill and 17/32" bit are included in the required tools.
The kit includes: four 1/2-13 UNC 1-1/2" grade 8 carriage bolts (part 10-10334), ten 0.250 x 1.00 x 1.50" round hole spacers (CM-SP50), six 1/2" lock washers (part 30-00153), four 1/2-13 UNC grade 8 hex nuts (part 20-00171), and two M12 x 1.25 grade 10.9 carriage bolts (part 10-10275).
1. Raise the hitch and align the forward slot in the side plate with the frame weldnut; secure with a CM-SP50 spacer, lock washer, and M12 x 1.25 bolt. 2. Install 1/2-13 x 1-1/2 carriage bolts with spacers and lock washers into the rearmost slots; secure with spacers, lock washers, and hex nuts. 3. Using the hitch as a template, drill a 17/32" hole through the forwardmost holes in both side plates into the frame. 4. Install 1/2-13 x 1-1/2 carriage bolts with spacers and lock washers into the forwardmost holes; secure with spacers, lock washers, and hex nuts. 5. Torque all fasteners to specification.
Torque all M12 hardware to 86 ft-lbs. Torque all 1/2" hardware to 110 ft-lbs. This applies to both the M12 x 1.25 bolts and the 1/2-13 carriage bolts and hex nuts used throughout the installation.
Do not exceed your vehicle manufacturer's recommended towing capacity. The Curt 13184 is rated for specific gross load capacities in both weight-carrying and weight-distribution modes, but those values are not shown on this manual copy. Contact Curt Manufacturing at 877-287-8634 or consult your Toyota Tundra owner's manual for the correct limits.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This is a routine inspection to maintain safe operation.
Yes, the Curt 13184 is compatible with TommyGate.
The Curt 13184 is designed for 2000-2006 Toyota Tundra models and is compatible with TommyGate equipment.
Yes, you must drill one 17/32" hole through the frame using the hitch as a template. A drill and 17/32" bit are required tools.
You need 19mm and 3/4" sockets, a 12" extension, ratchet, torque wrench, drill, and 17/32" drill bit.
Torque all M12 hardware to 86 ft-lbs and all 1/2" hardware to 110 ft-lbs.
Yes, periodically check that all fasteners are tight and structural components are sound. Do not exceed your vehicle manufacturer's recommended towing capacity.
The kit includes: one 30 amp auto-resetting circuit breaker, two #10 ring terminals, two 3/8" ring terminals, two 1/2" ring terminals, three 12-10 gauge butt connectors, 10 feet of 10 ga black/white duplex wire, 20 feet of 10 ga blue cross-linked wire, and eight 8.5" cable ties.
Yes, but with a critical difference: these vehicles require the stop signal wire to be spliced to the light green wire on the turn signal harness connector under the dash, not to the brake pedal switch. Do NOT connect to the red wire with green stripe, as serious damage may occur. All other vehicles connect to the brake pedal switch instead.
You will need: a test light, wire stripper/cutter, crimp tool, and 3/8" box end wrench. The test light is used to identify the cold (switched) side of the brake pedal switch.
Yes. The manual cautions to disconnect the tow vehicle's negative battery cable before installation. Reconnect it only in the final step after all wiring is complete.
Mount the 30 amp circuit breaker near the tow vehicle's positive battery terminal. This keeps the power wire run as short as possible and protects the circuit.
Use 10 gauge (10 ga) black wire from the duplex wire included in the kit. Strip 3/8" of insulation from each end. Crimp a #10 ring terminal to the end that attaches to the circuit breaker stud labeled 'BAT', and a 3/8" or 1/2" ring terminal (sized to fit your battery terminal) to the end that attaches to the positive battery terminal.
Feed the 10 ga duplex wire from the brake controller in the cockpit through the firewall into the engine compartment toward the battery. Cut to length as needed. At the battery end, crimp a 3/8" or 1/2" ring terminal to the white wire and a #10 ring terminal to the black wire. Attach the black wire to the circuit breaker stud labeled 'AUX' and tighten the nut with a 3/8" box end wrench.
When passing the duplex wire through the firewall into the engine compartment, use an existing grommet, add a new grommet, or fill the hole with silicone rubber to insulate and protect the wire. The same protection applies when passing the blue cross-linked wire through any sheet metal at the rear of the vehicle.
In the cockpit, attach the black duplex wire to the brake controller's battery wire (typically black) and the white duplex wire to the brake controller's ground wire (typically white). Use either one of the supplied yellow butt connectors or solder the leads together and insulate with heat shrink tubing.
Locate the brake pedal switch on the back side of the vehicle's brake pedal. Use a test light or volt meter to identify the 'cold' or switched side—this terminal will only show power when the brake pedal is depressed. Attach the stop signal wire (typically red) from the brake controller to the cold side of the switch using a wire tap.
Locate the semi-circle turn signal harness connector on the steering column under the dash. It has two rows of wires: a row of four and a row of seven. Attach the stop signal wire (typically red) from the brake controller to the light green wire using a wire tap. Do NOT connect to the red wire with green stripe, as serious damage may occur.
Feed the 10 ga blue cross-linked wire from the brake controller to the trailer connector at the rear of the vehicle, taking up any slack in the wire. When passing through any sheet metal, use an existing grommet, add a new grommet, or fill the hole with silicone rubber to protect the wire.
Attach the blue cross-linked wire to the brake controller's electric brake wire (typically blue) using one of the supplied yellow butt connectors or by soldering and insulating with heat shrink tubing. At the rear of the vehicle, trim any loose blue wire and attach it to the trailer connector's electric brake terminal. Refer to the trailer connector's wiring diagram for the correct terminal location.
Secure any loose wires with the cable ties provided. Connect the black power wire from the circuit breaker to the positive side of the battery. Connect the white ground wire from the brake controller to the negative side of the battery. Finally, reconnect the tow vehicle's negative battery cable to the battery.
The circuit breaker is 30 amps and auto-resetting. It must be mounted near the positive battery terminal and connected directly to the positive battery terminal via the included black 10 gauge wire.
Use a 3/8" box end wrench to tighten the nuts on the circuit breaker studs labeled 'BAT' and 'AUX'.
The kit includes 10 feet of 10 gauge black/white duplex wire for the battery and brake controller connections, and 20 feet of 10 gauge blue cross-linked wire for the electric brake signal to the trailer connector.
Black wire connects to the positive battery and circuit breaker. White wire connects to the brake controller ground and negative battery. Red wire is the stop signal wire from the brake controller. Blue wire is the electric brake signal wire. The manual notes these are 'typically' these colours but recommends confirming with your brake controller documentation.
Yes. You can solder the leads together and insulate with heat shrink tubing as an alternative to using the supplied yellow butt connectors. This applies to connections between the duplex wire and the brake controller wires, and between the blue cross-linked wire and the brake controller.
The black power wire must connect directly to the positive battery terminal via the 30 amp circuit breaker. Connecting to the fuse panel or any other accessory wiring may damage vehicle wiring and cause trailer brake failure. The circuit breaker protects the circuit and must be the only protection between the battery and the brake control system.
Do NOT connect the stop signal wire to the red wire with green stripe on the turn signal harness. Serious damage may occur. Connect only to the light green wire. Also, do not connect to the brake pedal switch on these vehicles; use the turn signal harness instead.
The kit is universal but requires an existing trailer connector and brake controller. 1989-1991 Ford E & F-Series with ABS use a different stop signal connection (turn signal harness instead of brake pedal switch). Consult your brake controller documentation for compatibility.
No drilling is required. The kit connects to existing components: the battery, brake controller, brake pedal switch (or turn signal harness on 1989-1991 Ford E & F-Series with ABS), and trailer connector.
Do NOT connect the stop signal wire to the red wire with green stripe on the turn signal harness—serious damage may occur. Connect to the light green wire instead, and do not use the brake pedal switch.
Connecting to the fuse panel or accessory wiring may damage vehicle wiring and cause trailer brake failure. The 30 amp circuit breaker must be the only protection between the battery and the brake control system.
Yes, Curt part number 55367 is designed for the Toyota Tundra. However, the manual does not specify model year range, cab style, bed length or drivetrain compatibility. Verify with the manufacturer or retailer that this part fits your specific Tundra configuration before purchase.
Curt part number 55367 is a T-connector harness for the Toyota Tundra. It connects to the vehicle's factory tow harness and includes a 4-flat connector, power wire with ring terminal, 10 AMP fuse, fuse holder, and cable ties.
The harness includes: a T-connector with 4-flat connector, power wire with ring terminal for battery connection, 10 AMP fuse, fuse holder, and cable ties for securing loose wires.
The manual refers to the factory tow harness as T4 but does not provide its specific location on the Tundra. Consult your vehicle's owner manual or contact a Toyota dealer for the exact location.
1. Locate the vehicle's factory tow harness (T4). 2. Remove the protective cap carefully without damaging the locking tabs. 3. Insert the T-connector harness connector into the vehicle's tow harness connector. 4. Ensure the connectors are fully inserted with locking tabs in place.
Route the 4-flat connector to the center of the vehicle and secure it in a convenient location that is out of the way. Secure any loose wires with the cable ties provided.
1. Locate the vehicle's positive battery terminal in the driver side of the engine compartment. 2. Connect the ring terminal on the power wire to the positive battery terminal. 3. Locate the vehicle's power wire connector in the engine compartment—it will have connection points matching the harness connector. 4. Insert the connector fully with locking tabs in place.
The Curt 55367 uses a 10 AMP fuse. Insert it into the fuse holder included with the harness.
Secure all loose wires with the cable ties provided. Ensure wires are routed away from areas where they may be cut or pinched by moving parts or sharp edges.
Do not damage the locking tabs when removing the protective cap from the factory tow harness connector. Avoid routing wires through areas where they may be cut or pinched by moving parts or sharp edges.
Yes, the Curt 55367 is designed for the Toyota Tundra. Verify your specific model year, cab style and bed length with the manufacturer before purchase.
The manual does not mention drilling. The installation appears to use the factory tow harness connector and battery terminal without modification.
A 10 AMP fuse is required. It is inserted into the fuse holder included with the harness.
Yes. Do not damage the locking tabs when removing the protective cap. Handle the connector carefully to avoid breaking the tabs.
The 4-way flat electrical adapter converts a vehicle's 4-way flat trailer connector to other trailer connector types (6-way round, 7-way RV blade, or dual 4-way flat). This allows you to tow trailers with different connector styles. Single-output models (57184, 57183, 57185, 57626, 57676) convert to one connector type; dual-output models (57604, 57624, 57672, 57674, 57102) provide two different connector outputs simultaneously.
Yes. Your vehicle must be equipped with a 4-way flat trailer connector. If your vehicle does not have one, you will need to install a custom wiring harness or other 4-way flat trailer connector before installing this adapter.
Both convert a 4-way flat connector to a 7-way RV blade. The difference is that 57185 includes a mounting bracket, while 57184 does not.
Both convert a 4-way flat connector to a 6-way round. The difference is that 57626 includes a mounting bracket, while 57183 does not.
Curt offers three dual-output models that provide both a 4-way flat and a 7-way RV blade output: part numbers 57672, 57674, and 57102. All three include a mounting bracket.
Curt offers two dual-output models that provide both a 4-way flat and a 6-way round output: part numbers 57604 and 57624. Both include a mounting bracket.
You will need: a 1/8" drill bit, drill, Phillips screwdriver, wire stripper, cutting tool, terminal crimpers, and a test light. The manual also lists three self-tapping screws (#10 - 1/2") as required, though these are not included with the product.
No. The three self-tapping screws (#10 - 1/2") used to attach the mounting bracket are not included and must be purchased separately.
Mount the combination harness in a location on the tow vehicle that is within reach of the trailer's wiring harness and near the center of the vehicle. The mounting bracket (if included) should be attached to the vehicle's bumper or other suitable surface.
Yes. You must drill two 1/8" holes: one for the grounding point and one (or more) for the mounting bracket. Before drilling, you must check for brake lines, fuel lines, wiring and other components that may be hidden behind or under the surface to avoid damage.
No. You must never attach the mounting bracket directly to the hitch by cutting, welding or drilling into the hitch. Mount it to the vehicle's bumper or other suitable surface instead.
The adapter uses four wires: Yellow (auxiliary or back-up lights), Blue (electric brakes), Black (positive power with appropriate inline fuse), and White (ground). All wires except black and white must be connected using 12 gauge (minimum) wire and butt connectors to the appropriate vehicle functions.
The white wire is the ground connection. It must be attached with a ring terminal to a 1/8" hole drilled in a suitable grounding point on the vehicle using a #10 - 1/2" self-tapping screw. This ground connection is required for the harness to work properly. The white wire on the vehicle's 4-way flat connector does not support the ground (-) functions of the combination harness.
Yes. The black wire (positive power) must be connected with an appropriate inline fuse. The manual does not specify the fuse amperage rating.
Use 12 gauge (minimum) wire for all connections. The manual specifies this minimum gauge for the remaining wires (yellow, blue, and black) when connecting to appropriate vehicle functions.
Failing to properly ground the product can cause loss of warranty, overheating and potential fire. The white wire must be securely attached to a clean grounding point using a #10 - 1/2" self-tapping screw in a 1/8" hole. The area must be clean of dirt, debris or undercoating.
Before drilling, you must check for brake lines, fuel lines, wiring and any other components that may be hidden behind or under the surface. Drilling into these components can cause damage and personal injury.
Do not exceed the product rating or the tow vehicle lamp load rating, whichever is lower. Exceeding either rating can cause damage or unsafe operation.
Confirm proper function with a test light or by using a properly functioning trailer. This verifies that all connections are working correctly before towing.
Secure any loose wires using cable ties or equivalent product to prevent them from moving, catching on components, or becoming damaged.
Your vehicle must have a 4-way flat trailer connector. If it does not, you will need to install a custom wiring harness or other 4-way flat connector first. Check the part number table to confirm the adapter converts to the connector type you need.
You must purchase three #10 - 1/2" self-tapping screws for the mounting bracket. You will also need an appropriate inline fuse for the black (positive power) wire; the manual does not specify the amperage.
Yes, you must drill two 1/8" holes: one for grounding and one for the mounting bracket. Before drilling, check for brake lines, fuel lines and wiring behind the surface. Never drill into the hitch.
Yellow = auxiliary/back-up lights; Blue = electric brakes; Black = positive power (needs inline fuse); White = ground (must be properly grounded or warranty is void and fire risk exists). Use 12 gauge minimum wire and butt connectors.
Proper grounding of the white wire is critical. Failing to ground it properly can cause loss of warranty, overheating and fire. The grounding point must be clean of dirt, debris and undercoating.
Test with a test light or by using a properly functioning trailer to confirm all connections work. Secure loose wires with cable ties.
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2000 - 2006 | Toyota Tundra | #13180 will not fit with towable bumper mount |
On Sale Today
Original price was $872.60. Current price is $647.36.You save $225.24 (26%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 29 - Tue, Sep 1
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
