Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Complete CURT Class 3 2" trailer hitch and 5-flat wiring kit (with 4-way to 5-way adapter for surge brakes) engineered for the 2001 - 2002 Toyota Tundra #13180 will not fit with towable bumper mount. Vehicle-specific fit, plug-and-play installation, all hardware and instructions included.
This custom kit fits the following vehicles:
All Hardware and Installation Instructions Included!
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Tundra (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 7,500 lbs. WD and 750 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
CURT custom wiring connectors are the easiest way to outfit your vehicle with a CURT trailer wiring connection. They are built with some of the most advanced technology in the industry, and each one is custom-fitted to work with a specific make and model. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Although this special socket is not equipped on every vehicle, a CURT custom wiring connector -- also called a T-connector -- utilizes the socket for simple, stress-free installation. Rather than requiring you to cut, splice and solder into your vehicle's wiring system, the custom wiring connector uses a single OEM-compatible plug and instantly provides a standard, universal vehicle-to-trailer wiring connection, typically in the form a 4-way flat. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. This particular plug-in connector provides a 4-way flat socket and is designed to be a custom wiring option for certain years of the Toyota Tundra (to verify your vehicle compatibility, see application info). It comes with all necessary hardware to establish a solid connection. It also comes with a dust cover to keep the connector socket clean when not in use. To ensure long-lasting reliability, all CURT custom wiring connectors are thoroughly tested for optimal functionality. Stress is the last thing you should feel when towing a trailer -- whether you're hauling your RV to that favorite camping destination, your ATVs up to the hunting grounds or your fishing boat to the new hidden hotspot. At CURT, we think your towing equipment should add to the enjoyment of your experience, not detract from it.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Yes, the Curt 13184 is designed for 2000-2006 Toyota Tundra models. It is also compatible with TommyGate equipment.
You will need: 19mm and 3/4" sockets, a 12" extension, a ratchet, a torque wrench, a drill, and a 17/32" drill bit. The torque wrench is essential because fasteners must be torqued to specific values during installation.
Yes, drilling is required. During installation, you must drill a 17/32" hole through the frame using the hitch as a template, through the forwardmost hole of both side plates. A drill and 17/32" bit are included in the required tools.
The kit includes: four 1/2-13 UNC 1-1/2" grade 8 carriage bolts (part 10-10334), ten 0.250 x 1.00 x 1.50" round hole spacers (CM-SP50), six 1/2" lock washers (part 30-00153), four 1/2-13 UNC grade 8 hex nuts (part 20-00171), and two M12 x 1.25 grade 10.9 carriage bolts (part 10-10275).
1. Raise the hitch and align the forward slot in the side plate with the frame weldnut; secure with a CM-SP50 spacer, lock washer, and M12 x 1.25 bolt. 2. Install 1/2-13 x 1-1/2 carriage bolts with spacers and lock washers into the rearmost slots; secure with spacers, lock washers, and hex nuts. 3. Using the hitch as a template, drill a 17/32" hole through the forwardmost holes in both side plates into the frame. 4. Install 1/2-13 x 1-1/2 carriage bolts with spacers and lock washers into the forwardmost holes; secure with spacers, lock washers, and hex nuts. 5. Torque all fasteners to specification.
Torque all M12 hardware to 86 ft-lbs. Torque all 1/2" hardware to 110 ft-lbs. This applies to both the M12 x 1.25 bolts and the 1/2-13 carriage bolts and hex nuts used throughout the installation.
Do not exceed your vehicle manufacturer's recommended towing capacity. The Curt 13184 is rated for specific gross load capacities in both weight-carrying and weight-distribution modes, but those values are not shown on this manual copy. Contact Curt Manufacturing at 877-287-8634 or consult your Toyota Tundra owner's manual for the correct limits.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This is a routine inspection to maintain safe operation.
Yes, the Curt 13184 is compatible with TommyGate.
The Curt 13184 is designed for 2000-2006 Toyota Tundra models and is compatible with TommyGate equipment.
Yes, you must drill one 17/32" hole through the frame using the hitch as a template. A drill and 17/32" bit are required tools.
You need 19mm and 3/4" sockets, a 12" extension, ratchet, torque wrench, drill, and 17/32" drill bit.
Torque all M12 hardware to 86 ft-lbs and all 1/2" hardware to 110 ft-lbs.
Yes, periodically check that all fasteners are tight and structural components are sound. Do not exceed your vehicle manufacturer's recommended towing capacity.
The CURT 56438 is designed for trucks with T5 wiring location, which is behind the passenger side rear bumper. To confirm fitment, check your vehicle owner's manual or contact the vehicle manufacturer. The manual does not list specific vehicle makes, models or years, so you should verify compatibility with CURT or your installer before purchase.
The CURT 56438 is a custom wiring harness with a converter box that connects your truck's taillight wiring to a 4-flat trailer connector. It allows you to tow a trailer with proper lighting control. The system includes signal circuits rated at 3.0 amps per side and tail/running circuits rated at 6.0 amps total.
You will need: ratchet, cutting tool, 10mm socket, flathead screwdriver, and socket extension. These are the minimum tools required for installation.
The package includes a custom wiring harness with fuse holder, a black converter box, a 4-flat dust cover, double-sided tape for mounting the converter box, and cable ties for securing wires. The manual does not specify whether the 4-flat connector itself is included or must be purchased separately.
Yes. You must disconnect the negative battery terminal before beginning installation. Keep the negative cable fastened down and away from the battery during the installation process. Reconnect it only after all other steps are complete and the fuse is installed.
The battery connection must be fuse-protected with a 10-amp maximum fuse. Do not exceed this rating. The fuse holder is included with the harness, but the fuse itself is not installed until after the harness installation is complete.
Mount the black converter box in a flat, protected location inside the vehicle near the taillight using the provided double-sided tape. The manual emphasizes that failure to mount the box in a protected area can cause loss of warranty, product failure, overheating and potential fire. Choose a location that is sheltered from moisture, heat sources and physical damage.
1. Locate the gray plastic connector between the battery and driver-side fender and remove the protective cover. 2. Insert the custom wiring harness (with fuse holder) onto the vehicle harness, ensuring connectors are fully inserted with locking tabs in place. 3. Attach the ring terminal end to the positive battery terminal. Do not install the fuse until the harness installation is complete.
1. Locate the vehicle taillight wiring harness connectors behind the rear bumper along the passenger side frame rail. 2. Remove the protective cover, taking care not to damage the locking tabs. 3. Insert the custom wiring harness connector into the vehicle connector, ensuring it is fully inserted with locking tabs in place.
Route the 4-flat connector to the center of the vehicle close to the receiver hitch and secure it with the provided cable ties. This routing protects the connector and keeps it accessible for trailer hookup.
Secure any loose wires using the provided cable ties. This prevents wires from moving, chafing, or becoming damaged during vehicle operation.
Do not exceed the product rating or your tow vehicle's lamp load rating, whichever is lower. The manual does not specify the product's maximum rating in amps or weight. Check your vehicle owner's manual or contact CURT for the specific product rating and your vehicle's lamp load capacity.
Signal circuits are rated at 3.0 amps per side. Tail and running circuits are rated at 6.0 amps total. Do not exceed these ratings, as exceeding the product rating can cause loss of warranty, overheating and potential fire.
After installation is complete, test for proper function by using a test light or connecting a properly wired trailer. This confirms that all connections are secure and the wiring harness is functioning correctly before towing.
Yes. Install the provided 4-flat dust cover after installation is complete. This helps prevent corrosion of the connector when it is not in use.
Perform periodic inspection of all wires and connections to ensure there is no visible damage or loose connections. The manual does not specify an exact interval, but regular checks before towing are recommended to maintain warranty coverage and safe operation.
Ratchet, cutting tool, 10mm socket, flathead screwdriver, and socket extension.
Yes, disconnect the negative battery terminal before starting. Keep it fastened away from the battery and reconnect only after all steps are complete and the fuse is installed.
10-amp maximum fuse. The fuse holder is included; do not install the fuse until harness installation is complete.
Signal circuits: 3.0 amps per side. Tail/running circuits: 6.0 amps total. Do not exceed these ratings.
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2001 - 2002 | Toyota Tundra | #13180 will not fit with towable bumper mount |
On Sale Today
Original price was $491.75. Current price is $393.75.You save $98.00 (20%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Thu, Sep 10 - Sun, Sep 13
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
