Ask a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2001 - 2006 Mitsubishi Montero
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Side Application Type Description | Blank |
| T-Connector Location | S1,S2 |
| Tail Light Circuits | 7.5 Amps |
| Turn and Brake Circuits | 3.0 Amps |
| Warranty | One-Year Limited Warranty |
| Converter Type | Circuit Protected |
| Electrical System Type | 3W |
| Finish | N/A |
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2001 - 2006 | Mitsubishi Montero | — |
The 01-06 Mitsubishi Montero CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1982) fits 2001-2006 Mitsubishi Montero models. The 2006 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 01-06 Mitsubishi Montero CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1982) is designed to fit the 2001-2006 Mitsubishi Montero.
The 01-06 Mitsubishi Montero CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1982) fits the following vehicles: 2001-2006 Mitsubishi Montero. Always verify your specific year, make, and model before ordering.
The 01-06 Mitsubishi Montero CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1982) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
CURT part 55380 is designed for the Mitsubishi Montero. The manual does not specify which model years or generations are compatible. Contact CURT or your retailer to confirm fitment for your specific Montero year and generation before purchasing.
The kit includes a T-connector with yellow and green wire ends, a 4-flat wire connector, a black converter box, a white grounding wire with eyelet and screw, double-sided tape, and cable ties for securing loose wires and connectors.
Yes. You must open the hatch and remove both taillight housings by removing two Phillips head screws on each housing. Pull the housings away carefully to avoid damaging the alignment tabs.
You will need a Phillips head screwdriver to remove the taillight housing screws. If no suitable grounding point exists on the vehicle frame, you will need a drill with a 3/32" bit to create a grounding hole. All other fasteners and connectors are included.
Drilling is required only if no suitable existing grounding point (such as a screw with nut in the vehicle frame) is available near the connector location. If drilling is necessary, you must drill a 3/32" hole for the white grounding wire. Always verify that no hidden items, wiring, or fuel lines are behind or under the surface before drilling.
Drill a 3/32" hole for the white grounding wire. Secure the wire using the eyelet and screw provided in the kit.
Starting on the driver's side, separate the vehicle's taillight wiring harness connectors. Insert the T-connector end with the yellow wire between the separated connectors. Make sure the connectors are fully inserted with locking tabs in place. Repeat this process on the passenger side using the T-connector end with the green wire.
The yellow wire T-connector is inserted on the driver's side of the vehicle's taillight wiring harness. The green wire T-connector is routed to the passenger side along the backside of the bumper and inserted into the passenger-side taillight wiring harness. Both connect the vehicle's taillight signals to the trailer connector.
Route the green wire and 4-flat connector down through the opening under the taillight assembly. Under the vehicle, route the green wire to the passenger side along the backside of the bumper and up through the opening on the passenger side. Route the 4-flat connector to the center of the vehicle and secure it in a convenient, out-of-the-way location.
Locate a suitable grounding point near the connector, such as an existing screw with nut in the vehicle's frame. If no suitable point exists, drill a 3/32" hole and secure the white wire using the eyelet and screw provided in the kit.
Adhere the black converter box to the frame of the vehicle using the double-sided tape provided in the kit.
Use the cable ties provided in the kit to secure any loose parts of the T-connector and any loose wires. This prevents snagging, damage, and ensures a neat installation.
Before drilling, verify that no miscellaneous items—such as wiring, fuel lines, or other components—are hidden behind or under the surface where you plan to drill. Drilling into hidden items can cause damage to the vehicle and personal injury.
Yes. When removing the taillight housings in step 1, pull them away from the vehicle carefully to avoid damaging the alignment tabs. Damaged tabs may prevent proper reinstallation or cause misalignment.
CURT 55380 is designed for the Mitsubishi Montero. Confirm your specific model year with CURT or your retailer before purchasing.
You need a Phillips head screwdriver and, if no existing grounding point is available, a drill with a 3/32" bit. All fasteners and connectors are included.
Drilling is required only if no existing grounding point is available on the vehicle frame. If needed, drill a 3/32" hole. Always verify no hidden items are present before drilling.
Yes. Remove both taillight housings by removing two Phillips head screws on each, then carefully pull them away to avoid damaging the alignment tabs.
Separate the vehicle's taillight wiring connectors on each side. Insert the yellow wire T-connector on the driver's side and the green wire T-connector on the passenger side between the separated connectors, ensuring locking tabs are fully seated.
Total for 2 items:
$588.51$608.70
On Sale Today
Original price was $98.90. Current price is $91.76.You save $7.14 (7%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Thu, Aug 13 - Sun, Aug 16
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
