Ask a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2002 - 2007 Saturn Vue
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
| Side Application Type Description | Blank |
| T-Connector Location | S1,S2 |
| Tail Light Circuits | 7.5 Amps |
| Turn and Brake Circuits | 3.0 Amps |
| Warranty | One-Year Limited Warranty |
| Converter Type | Circuit Protected |
| Electrical System Type | 3W |
| Finish | N/A |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2002 - 2007 | Saturn Vue | — |
The 02-07 Saturn Vue CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2234) fits 2002-2007 Saturn Vue models. The 2007 model year is the last year covered by this part number. For newer models, check for an updated version.
The 02-07 Saturn Vue CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2234) fits the following vehicles: 2002-2007 Saturn Vue. Always verify your specific year, make, and model before ordering.
Yes, the 02-07 Saturn Vue CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2234) is designed to fit the 2002-2007 Saturn Vue.
The 02-07 Saturn Vue CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2234) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the Curt 56018 is designed for Saturn Vue SUVs. The installation involves connecting the harness to the existing taillight connectors on both sides of the vehicle.
The Curt 56018 has two circuit ratings: Signal Circuits are rated at 3.0 amps per side, and Tail/Running Circuits are rated at 6.0 amps total. Do not exceed these ratings or the tow vehicle lamp load rating, whichever is lower, as exceeding the rating can cause loss of warranty, overheating and potential fire.
You will need: a ratchet, T-15 Torx bit, Phillips screwdriver, flat blade screwdriver, and a panel trim removal tool.
The Curt 56018 includes a custom wiring harness with connectors (green wire end and yellow wire end), a black converter box, double-sided tape for mounting the converter box, a 4-flat connector, a 4-flat dust cover, and cable ties for securing loose wires.
The manual does not specify whether the battery must be disconnected. Consult your vehicle owner's manual or contact the vehicle manufacturer for guidance on electrical work safety.
Open the vehicle tailgate. Remove both taillight assemblies by removing two Torx-15 head screws on each side (one on each side of the taillight housing). Use a T-15 Torx bit with a ratchet to remove these screws.
Behind the taillight assemblies, locate the vehicle taillight wiring harness connectors. Separate the connectors from the taillight housing by carefully pulling them apart. Take care not to damage the locking tabs on the connectors, as these must remain intact for proper reconnection.
On both sides of the vehicle in the taillight pocket, remove two 10 mm nuts. After removing these nuts, carefully pull back on the rear quarter panel to create an opening to route the connectors through.
Yes. Partially remove the rear wheel wells and mud guards by removing the plastic fasteners holding each in place. Carefully pull back on the wheel well to gain access to pull wires down to the bumper fascia level.
On the passenger side, insert the custom wiring harness end with the green wire between the separated taillight connectors. Make sure the connectors are fully inserted with locking tabs in place to ensure a secure connection.
From the passenger side taillight pocket, route the custom wiring harness end with the yellow wire down through the opening made in Steps 2 and 3. From underneath the vehicle, route the yellow wire toward the backside of the bumper fascia, then to the driver side and up to the taillight.
Insert the custom wiring harness end with the yellow wire between the separated driver side taillight connectors. Make sure the connectors are fully inserted with locking tabs in place.
Locate a flat spot inside the vehicle near the taillight and adhere the black converter box using the provided double-sided tape.
When in use, route the 4-flat to the center of the vehicle and out of the trunk. When not in use, roll up and store in a convenient, out-of-the-way location inside the trunk. Secure any loose wires with the provided cable ties.
Reinstall all items removed during installation, including the taillight assemblies, rear quarter panel, wheel wells and mud guards. Install the provided 4-flat dust cover to help prevent corrosion.
Do not exceed the product rating (Signal Circuits 3.0 amps per side, Tail/Running Circuits 6.0 amps total) or the tow vehicle lamp load rating, whichever is lower. Exceeding the rating can cause loss of warranty, overheating and potential fire.
All steps must be followed to ensure the wiring harness functions properly. Once installed, test for proper function by using a test light or connecting a properly wired trailer.
The Curt 56018 is designed for Saturn Vue SUVs.
You need a ratchet, T-15 Torx bit, Phillips screwdriver, flat blade screwdriver, and panel trim removal tool.
Yes. Remove both taillight assemblies by removing two Torx-15 head screws on each side.
Signal Circuits: 3.0 amps per side. Tail/Running Circuits: 6.0 amps total. Do not exceed these ratings or the tow vehicle lamp load rating, whichever is lower.
Test for proper function by using a test light or connecting a properly wired trailer.
Total for 2 items:
$429.75$527.56
Free Shipping
Ships free on all orders
Authorized DealerQuick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Thu, Aug 20 - Sun, Aug 23
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
