01-03 Chrysler Town & Country With Stow 'n Go CURT 4-flat Plug and Play Trailer WiringCURT$71.76In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Electrical System Type | 2W |
| Finish | N/A |
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
| Side Application Type Description | Blank |
| T-Connector Location | S1,S2 |
| Warranty | One-Year Limited Warranty |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2004 - 2007 | Chrysler Town & Country | With Stow 'n Go |
The 04-07 Chrysler Town & Country With Stow 'n Go CURT 4-flat Plug and Play Trailer Wiring (Part #CTW650) fits 2004-2007 Chrysler Town & Country models. The 2007 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 04-07 Chrysler Town & Country With Stow 'n Go CURT 4-flat Plug and Play Trailer Wiring (Part #CTW650) is designed to fit the 2004-2007 Chrysler Town & Country.
The 04-07 Chrysler Town & Country With Stow 'n Go CURT 4-flat Plug and Play Trailer Wiring (Part #CTW650) fits the following vehicles: 2004-2007 Chrysler Town & Country. Always verify your specific year, make, and model before ordering.
The 04-07 Chrysler Town & Country With Stow 'n Go CURT 4-flat Plug and Play Trailer Wiring (Part #CTW650) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the Curt 55537 is designed for Dodge Caravan, Dodge Grand Caravan, and Chrysler Town & Country vans. It is classified as a wiring harness for SUVs, mini and full-sized vans.
Yes, the Curt 55537 custom wiring harness is compatible with Chrysler Town & Country vans.
The kit includes a custom wiring harness with yellow and green wire ends, a white ground wire with ring terminal, a provided screw for grounding, cable ties for securing loose wires, sealant for the grommet, and a 4-flat dust cover.
You need a panel trim removal tool. The manual also references checking your vehicle owner's manual or contacting the vehicle manufacturer for additional information.
The manual does not specify whether the battery must be disconnected. Consult your vehicle owner's manual or contact the vehicle manufacturer for this information.
Drilling may be required. Step 7 instructs you to locate an existing screw with nut in the vehicle frame for the ground wire, or drill a 3/32" pilot hole if no suitable existing screw is available. Before drilling, you must check for miscellaneous items hidden behind or under surfaces to avoid damage and personal injury.
Drill a 3/32" pilot hole for the provided ground screw. The area should be free of rust, dirt and paint before drilling.
Yes. In Step 2, you must locate the grommet behind the taillight where the vehicle taillight wiring passes through, remove it, and cut a slit large enough to route the custom wiring harness through. In Step 5, you reseat the grommet using the provided sealant to seal the cut and around all wires.
Route the harness end with the yellow wire through the grommet opening on the driver side and insert it between the separated taillight connectors. Route the harness end with the green wire to the passenger side behind the removed scuff panels and repeat the process. When not in use, roll up and store the 4-flat connector in a convenient, out-of-the-way location inside the trunk. Route the 4-flat to the center of the vehicle and out of the trunk when in use.
You must remove the rear scuff panel and partially remove both the driver and passenger side interior trim panels to access the opening between the back of the taillight and the inside of the vehicle.
Open the rear hatch and remove the two plastic fasteners securing each taillight assembly in place. Remove the taillight assemblies to locate the vehicle taillight wiring harness. Separate the connectors from the taillight housing, taking care not to damage the locking tabs.
The yellow wire end connects on the driver side between the separated taillight connectors. The green wire end connects on the passenger side between the separated taillight connectors. Both must be fully inserted with locking tabs in place.
Locate a suitable grounding point near the connector, such as an existing screw with nut in the vehicle frame. If no existing screw is available, drill a 3/32" pilot hole. The area must be free of rust, dirt and paint. Secure the white ground wire using the ring terminal and provided screw.
The provided sealant is used to seal the slit cut in the grommet and around all wires after routing the custom wiring harness through. This is done in Step 5 after connecting the harness on the driver side, and again in Step 6 after connecting on the passenger side.
Secure any loose wires with the provided cable ties. This is done in Step 8 after routing the 4-flat connector.
Test for proper function by using a test light or connecting a properly wired trailer. All steps must be followed to ensure the wiring harness will function properly.
Do not exceed the product rating or tow vehicle lamp load rating, whichever is lower. Exceeding the product rating can cause loss of warranty, overheating and potential fire. Consult the product documentation or manufacturer for the specific amperage or wattage rating.
Before drilling, check for miscellaneous items that may be hidden behind or under any surface to avoid damage and personal injury.
The area should be free of rust, dirt and paint before securing the white ground wire with the ring terminal and provided screw.
Yes. In Step 9, you must reinstall all items removed during installation. You should also install the provided 4-flat dust cover to help prevent corrosion.
Yes, the Curt 55537 is designed for Dodge Caravan, Dodge Grand Caravan, and Chrysler Town & Country vans.
You need a panel trim removal tool. A test light or properly wired trailer is needed to test the installation.
Drilling may be required. You must drill a 3/32" pilot hole for the ground screw if no existing screw with nut is available in the vehicle frame.
Yes, you must cut a slit in the grommet large enough to route the custom wiring harness through, then reseal it with the provided sealant.
Do not exceed the product rating or tow vehicle lamp load rating, whichever is lower. Exceeding the rating can cause loss of warranty, overheating and potential fire.
Test for proper function by using a test light or connecting a properly wired trailer.
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Fri, Sep 11 - Mon, Sep 14
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 4 items:
$143.71
No reviews have been added for this product.