Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Complete CURT Class 2 1-1/4" trailer hitch and 4-flat custom wiring kit engineered for the 2004 - 2007 Dodge Caravan Excluding Stow 'n Go. Vehicle-specific fit, plug-and-play installation, all hardware and instructions included.
This custom kit fits the following vehicles:
All Hardware and Installation Instructions Included!
Whatever the next checkpoint is on your adventure -- whether it's getting your bike on the trail before sunrise or making it to the campground before dark -- CURT class 2 hitches let you Bring It with confidence. These receiver hitches are made to handle most light-duty towing applications and offer a custom fit for your vehicle. Typically used on full-size cars, crossovers, compact SUVs, minivans or even compact pickup trucks, a CURT class 2 trailer hitch complements the design of smaller vehicles. This particular class 2 hitch is made to be a custom hitch for certain years of the Chrysler Town & Country, Dodge Caravan and Plymouth Voyager (to verify vehicle compatibility, see application info). It offers a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. Class 2 trailer hitches can typically be used to tow a variety of lightweight trailers, such as a small utility trailer, small fishing boat trailer or popup camper (NOTE: Never exceed the lowest weight capacity of any towing component). They are also perfect for adding cargo space to your vehicle with a bike rack or cargo carrier. This class 2 hitch features a 1-1/4" receiver tube to accept a ball mount shank or other hitch-mounted accessory. For safety, it is tested in accordance with SAE J684. A custom trailer hitch design requires extra care, and as such, CURT class 2 hitches are engineered using real vehicles and hands-on research. We use high-strength steel, robotic welding and rigorous testing to produce hitches that are built to fit your lifestyle. To ensure that each hitch will be a reliable extension of your vehicle, we also finish our hitches in a co-curing of liquid A-coat and black powder coat, giving them long-lasting rust and wear resistance.
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness -- also called a T-connector -- is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Dodge Caravan, Dodge Grand Caravan and Chrysler Town and Country (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination -- maybe it's the boat landing at your favorite fishing spot, maybe it's a campsite that overlooks one of nature's masterpieces, or maybe it's the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2004 - 2007 | Dodge Caravan | Excluding Stow 'n Go |
The 04 - 07 Dodge Caravan Excluding Stow 'n Go Curt 1-1/4", Class 2 Trailer Tow Hitch + 4-flat Wiring Kit 12094 (Part #CHW-763) fits the following vehicles: 2004-2007 Dodge Caravan. Always verify your specific year, make, and model before ordering.
The 04 - 07 Dodge Caravan Excluding Stow 'n Go Curt 1-1/4", Class 2 Trailer Tow Hitch + 4-flat Wiring Kit 12094 (Part #CHW-763) fits 2004-2007 Dodge Caravan models. The 2007 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 04 - 07 Dodge Caravan Excluding Stow 'n Go Curt 1-1/4", Class 2 Trailer Tow Hitch + 4-flat Wiring Kit 12094 (Part #CHW-763) is designed to fit the 2004-2007 Dodge Caravan.
The 04 - 07 Dodge Caravan Excluding Stow 'n Go Curt 1-1/4", Class 2 Trailer Tow Hitch + 4-flat Wiring Kit 12094 (Part #CHW-763) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, Curt part number 12094 is designed for 1996–2007 Chrysler Town & Country, Dodge Caravan, and Plymouth Voyager, including Sport models.
Yes, Curt part number 12094 fits 1996–2007 Dodge Caravan and Plymouth Voyager, including Sport models.
Curt ball mount part number D-21 / 45521 is designed for use with this hitch.
The hitch includes 4 bolts (M12×1.75, 35 mm, CL10.9, part number 10-10516) and 4 washers (S-CON, 1/2 inch, part number 30-00149). However, the installation procedure reuses the two rearmost bolts already on the vehicle frame, so the included fasteners may be spares or for alternative applications.
No, drilling is not required. The hitch is designed to use existing frame bolts and welded nuts on the vehicle.
1. Raise the vehicle for access to the underside. 2. Remove the two rearmost bolts from the vehicle frame (two per side). 3. Raise the hitch into position. 4. Secure by reinstalling the bolts removed in step 2. 5. Torque fasteners to 79 lb.-ft.
Torque all fasteners to 79 lb.-ft.
Non-trailer loads may be applied to this hitch only if they are fully supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
Do not exceed your vehicle manufacturer's recommended towing capacity, even if the hitch capacity is higher.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound.
Periodically check all fasteners to ensure they remain tight and inspect all structural components for damage or wear.
Yes, if you own a 1996–2007 Chrysler Town & Country, Dodge Caravan, or Plymouth Voyager (including Sport models).
No drilling is required. The hitch uses existing frame bolts and welded nuts.
Torque all fasteners to 79 lb.-ft.
Non-trailer loads require auxiliary stabilizing straps for full support. Unsupported non-trailer loads void the warranty.
Periodically verify that all fasteners are tight and all structural components are sound.
Yes, the Curt 55537 is designed for Dodge Caravan, Dodge Grand Caravan, and Chrysler Town & Country vans. It is classified as a wiring harness for SUVs, mini and full-sized vans.
Yes, the Curt 55537 custom wiring harness is compatible with Chrysler Town & Country vans.
The kit includes a custom wiring harness with yellow and green wire ends, a white ground wire with ring terminal, a provided screw for grounding, cable ties for securing loose wires, sealant for the grommet, and a 4-flat dust cover.
You need a panel trim removal tool. The manual also references checking your vehicle owner's manual or contacting the vehicle manufacturer for additional information.
The manual does not specify whether the battery must be disconnected. Consult your vehicle owner's manual or contact the vehicle manufacturer for this information.
Drilling may be required. Step 7 instructs you to locate an existing screw with nut in the vehicle frame for the ground wire, or drill a 3/32" pilot hole if no suitable existing screw is available. Before drilling, you must check for miscellaneous items hidden behind or under surfaces to avoid damage and personal injury.
Drill a 3/32" pilot hole for the provided ground screw. The area should be free of rust, dirt and paint before drilling.
Yes. In Step 2, you must locate the grommet behind the taillight where the vehicle taillight wiring passes through, remove it, and cut a slit large enough to route the custom wiring harness through. In Step 5, you reseat the grommet using the provided sealant to seal the cut and around all wires.
Route the harness end with the yellow wire through the grommet opening on the driver side and insert it between the separated taillight connectors. Route the harness end with the green wire to the passenger side behind the removed scuff panels and repeat the process. When not in use, roll up and store the 4-flat connector in a convenient, out-of-the-way location inside the trunk. Route the 4-flat to the center of the vehicle and out of the trunk when in use.
You must remove the rear scuff panel and partially remove both the driver and passenger side interior trim panels to access the opening between the back of the taillight and the inside of the vehicle.
Open the rear hatch and remove the two plastic fasteners securing each taillight assembly in place. Remove the taillight assemblies to locate the vehicle taillight wiring harness. Separate the connectors from the taillight housing, taking care not to damage the locking tabs.
The yellow wire end connects on the driver side between the separated taillight connectors. The green wire end connects on the passenger side between the separated taillight connectors. Both must be fully inserted with locking tabs in place.
Locate a suitable grounding point near the connector, such as an existing screw with nut in the vehicle frame. If no existing screw is available, drill a 3/32" pilot hole. The area must be free of rust, dirt and paint. Secure the white ground wire using the ring terminal and provided screw.
The provided sealant is used to seal the slit cut in the grommet and around all wires after routing the custom wiring harness through. This is done in Step 5 after connecting the harness on the driver side, and again in Step 6 after connecting on the passenger side.
Secure any loose wires with the provided cable ties. This is done in Step 8 after routing the 4-flat connector.
Test for proper function by using a test light or connecting a properly wired trailer. All steps must be followed to ensure the wiring harness will function properly.
Do not exceed the product rating or tow vehicle lamp load rating, whichever is lower. Exceeding the product rating can cause loss of warranty, overheating and potential fire. Consult the product documentation or manufacturer for the specific amperage or wattage rating.
Before drilling, check for miscellaneous items that may be hidden behind or under any surface to avoid damage and personal injury.
The area should be free of rust, dirt and paint before securing the white ground wire with the ring terminal and provided screw.
Yes. In Step 9, you must reinstall all items removed during installation. You should also install the provided 4-flat dust cover to help prevent corrosion.
Yes, the Curt 55537 is designed for Dodge Caravan, Dodge Grand Caravan, and Chrysler Town & Country vans.
You need a panel trim removal tool. A test light or properly wired trailer is needed to test the installation.
Drilling may be required. You must drill a 3/32" pilot hole for the ground screw if no existing screw with nut is available in the vehicle frame.
Yes, you must cut a slit in the grommet large enough to route the custom wiring harness through, then reseal it with the provided sealant.
Do not exceed the product rating or tow vehicle lamp load rating, whichever is lower. Exceeding the rating can cause loss of warranty, overheating and potential fire.
Test for proper function by using a test light or connecting a properly wired trailer.
On Sale Today
Original price was $361.90. Current price is $332.04.You save $29.86 (8%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Aug 9 - Wed, Aug 12
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 4 items:
$456.62$486.48
No reviews have been added for this product.