Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
| Finish | GLOSS BLACK POWDER COAT |
| Main Body Shape | Square |
| Material | Carbon Steel |
| Mount Type Description | Blank |
| Receiver Tube Size | 1-1/4 IN |
| Side Application Type Description | Blank |
| Tongue Weight (TW) | 200 LB |
| Warranty | Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
| Weight Carrying Capacity (WC) | 2,000 LB |
| Side Application Type Description | Blank |
| Tongue Weight (TW) | 350 LB |
| Warranty | Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
| Drop | 3-1/4 IN |
| Finish | GLOSS BLACK POWDER COAT |
| Gross Trailer Weight (GTW) | 3,500 LB |
| Material | Blank |
| Mount Type Description | Blank |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2005 - 2008 | Mini Cooper | Convertible, excluding 'S' model |
The 05 - 08 Mini Cooper Convertible, excluding 'S' model 1.25in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit by CURT HWA1961 (Part #HWA1961) fits the following vehicles: 2005-2008 Mini Cooper. Always verify your specific year, make, and model before ordering.
The 05 - 08 Mini Cooper Convertible, excluding 'S' model 1.25in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit by CURT HWA1961 (Part #HWA1961) fits 2005-2008 Mini Cooper models. The 2008 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 05 - 08 Mini Cooper Convertible, excluding 'S' model 1.25in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit by CURT HWA1961 (Part #HWA1961) is designed to fit the 2005-2008 Mini Cooper.
The 05 - 08 Mini Cooper Convertible, excluding 'S' model 1.25in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit by CURT HWA1961 (Part #HWA1961) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, Curt part number 11126 is designed for Mini Cooper. The hitch is a receiver-style hitch that mounts to the rear of the vehicle using existing weldnuts on both sides of the frame.
The hitch is designed for use with ball mount D-19 / 45519. This ball mount is removable and must be secured with a hitch pin and clip before towing.
Required tools are: ratchet, torque wrench, 12-inch extension, 12mm socket, 8mm socket, offset screwdriver, and flat blade screwdriver. A 10mm socket is also needed for one fastener under the bumper cover. You may need pliers to install the hitch pin and clip.
The hitch includes 8 washers (part number 30-00148, 3/8-inch S-CON, YZ). Installation uses the vehicle's existing M8 bolts (removed during bumper beam removal) and existing weldnuts on both sides of the frame. No additional bolts are supplied; the original fasteners are reused.
Yes, the bumper cover must be completely removed. This involves removing 11 fasteners from various locations: 4 hex head fasteners inside the wheel wells (2 each side), 2 hidden fasteners behind the fender flairs (1 each side), 2 hex head screws from the bottom of the bumper cover (1 each side), 1 fastener under the bumper cover to the right of the exhaust, and 2 fasteners visible when the rear hatch is open. If your vehicle has rear lights or sensors, the wiring harness must be disconnected.
Wheel removal is optional. The manual notes that if needed, you may remove rear wheels to access the 4 hex head fasteners inside the wheel wells (2 each side) during bumper cover removal.
The bumper beam assembly is removed by taking out 8 M8 bolts. The divider panel is secured to the aluminum bumper beam with 2 plastic nuts. During installation, the plastic nuts, divider panel, and hard foam energy absorber are removed and returned to the owner. The hitch is then sandwiched between the bumper beam and the rear of the car, and the original M8 bolts are reused to secure it.
All M8 hardware must be torqued to 23 ft-lbs. Use 3/8-inch conical toothed washers (part number 30-00148) under each bolt.
No drilling is required. The hitch uses existing weldnuts on both sides of the vehicle frame. However, if the receiver tube interferes with the lip in the center of the bumper cover during reassembly, you may need to trim the bumper cover lip back. Be careful not to cut any piece needed to snap the light or center trim piece into position.
Raise the hitch into position by aligning the holes with the existing weldnuts on both sides of the frame. The hitch will fit firmly between the spare tire and the rear panel. It is then sandwiched between the bumper beam and the rear of the car, and secured using the 8 existing M8 bolts.
If your vehicle is equipped with a rear light or rear sensors, you must disconnect the wiring harness from the back of the bumper cover and from the rear light before removing the bumper cover. After the hitch is installed, the wiring harness is reconnected to the bumper beam using push fasteners, and the side markers must be re-attached to the wire harness before securing the bumper cover. Keep the wiring harness clear of the exhaust, heat shield, and hitch receiver.
Before towing, the hitch pin and clip must be in place, securing the ball mount to the receiver. The hitch is not intended for use as a weight-distributing hitch. Do not exceed your vehicle manufacturer's recommended towing capacity.
All non-trailer loads applied to this hitch must be supported by 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
The manual notes that longer safety chains may be required to reach the chains loops. You must verify that your safety chains are long enough to clear the lower valance while turning before towing.
After installation, align the bumper cover with the vehicle and check for interference issues. The receiver tube may interfere with the lip in the center of the bumper cover; if so, trim the bumper cover lip back carefully, being careful not to cut any piece needed to snap the light or center trim piece into position. Ensure all 11 fasteners are reinstalled and fender flairs are snapped back into place.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This is a general maintenance requirement to keep the hitch in safe operating condition.
No. This hitch is not intended for use as a weight-distributing hitch. It is a weight-carrying hitch only.
Yes, this hitch features a removable ball mount. The ball mount (D-19 / 45519) is secured to the receiver with a hitch pin and clip, which must be in place before towing.
The center rear light or trim piece must be removed to access the hitch. This is done by depressing tabs on both sides behind the bumper cover. You may need to use pliers to install the hitch pin and clip.
Yes, Curt 11126 is designed for Mini Cooper and uses existing weldnuts on the frame.
You need: ratchet, torque wrench, 12-inch extension, 12mm socket, 8mm socket, 10mm socket, offset screwdriver, flat blade screwdriver, and pliers.
All M8 bolts must be torqued to 23 ft-lbs using 3/8-inch conical toothed washers.
Periodically check that all fasteners are tight and structural components are sound.
On Sale Today
Original price was $550.80. Current price is $532.16.You save $18.64
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Wed, Sep 9 - Sat, Sep 12
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.