Ask a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2005 - 2010 Kia Sportage
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Converter Type | Circuit Protected |
| Electrical System Type | 3W |
| Finish | N/A |
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
| Side Application Type Description | Blank |
| T-Connector Location | S5 |
| Tail Light Circuits | 7.5 Amps |
| Turn and Brake Circuits | 3.0 Amps |
| Warranty | One-Year Limited Warranty |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2005 - 2010 | Kia Sportage | — |
The 05-10 KIA Sportage CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1637) fits 2005-2010 Kia Sportage models. The 2010 model year is the last year covered by this part number. For newer models, check for an updated version.
The 05-10 KIA Sportage CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1637) fits the following vehicles: 2005-2010 Kia Sportage. Always verify your specific year, make, and model before ordering.
Yes, the 05-10 KIA Sportage CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1637) is designed to fit the 2005-2010 Kia Sportage.
The 05-10 KIA Sportage CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1637) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The Curt 55529 is designed for Kia Sportage V6 models only. If your Sportage has a V6 engine, this connector will fit. If you have a different engine type, this product is not compatible. Check your vehicle's owner's manual or contact the vehicle manufacturer to confirm your engine type.
The Curt 55529 has two amperage ratings: Signal Circuits are rated at 3.0 amps per side, and Tail/Running Circuits are rated at 6.0 amps total. Do not exceed these ratings or your tow vehicle's lamp load rating, whichever is lower. Exceeding the product rating can cause loss of warranty, overheating and potential fire.
The manual does not specify required tools. However, based on the installation steps, you may need a drill with a 3/32" bit (if drilling a pilot hole for the ground screw), a screwdriver, and possibly a wrench or socket to secure the ground screw with its nut. Contact Curt Manufacturing for a complete tool list.
The vehicle connector is located on the passenger side of your Kia Sportage, between the bumper and rear tire. The connector is marked as S5 and is positioned behind the driver side rear bumper. You will need to remove a protective cover to access it.
Locate the vehicle connector on the passenger side between the bumper and rear tire. Remove the protective cover carefully, taking care not to damage the locking tabs. Insert the custom wiring harness into the vehicle connector, ensuring the connectors are fully inserted and the locking tabs are in place. The connectors must be fully seated for proper function.
Locate a suitable grounding point near the connector, such as an existing screw with nut in the vehicle frame. If no suitable point exists, drill a 3/32" pilot hole for the provided screw. The area must be free of rust, dirt and paint. Secure the white ground wire using the ring terminal and provided screw. Before drilling, check for hidden items behind or under any surface to avoid damage and personal injury.
Locate a flat spot inside the vehicle near the taillight and adhere the black converter box using the provided double-sided tape. The box should be mounted in a secure, accessible location.
When in use, route the 4-flat to the center of the vehicle and out of the trunk. When not in use, roll up and store in a convenient, out-of-the-way location inside the trunk. Secure any loose wires with the provided cable ties to prevent tangling and damage.
After installation, reinstall all items removed during the install. Install the provided 4-flat dust cover to help prevent corrosion. Test the connector for proper function by using a test light or connecting a properly wired trailer. All steps must be followed to ensure the wiring connector will function properly.
Drilling may be required. If a suitable grounding point (such as an existing screw with nut in the vehicle frame) is available near the connector, you can use that. If not, you will need to drill a 3/32" pilot hole for the provided ground screw. Before drilling, check for hidden items behind or under any surface to avoid damage and personal injury.
Do not exceed the product rating (Signal Circuits 3.0 amps per side, Tail/Running Circuits 6.0 amps total) or your tow vehicle's lamp load rating, whichever is lower. Exceeding the product rating can cause loss of warranty, overheating and potential fire. Additionally, check for hidden items before drilling to avoid damage and personal injury.
Test the connector for proper function by using a test light or connecting a properly wired trailer. All installation steps must be followed to ensure the wiring connector will function properly before testing.
Yes, if your Sportage has a V6 engine. The Curt 55529 is designed for Kia Sportage V6 models only.
Signal Circuits: 3.0 amps per side. Tail/Running Circuits: 6.0 amps total. Do not exceed these ratings or your vehicle's lamp load rating, whichever is lower.
Possibly. If an existing screw with nut is available in the vehicle frame near the connector, no drilling is needed. Otherwise, you will drill a 3/32" pilot hole for the provided ground screw.
On the passenger side of your Kia Sportage, between the bumper and rear tire, behind the driver side rear bumper.
Roll it up and store it in a convenient, out-of-the-way location inside the trunk. Secure loose wires with the provided cable ties.
Use a test light or connect a properly wired trailer to verify proper function.
Total for 4 items:
$139.71
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 15 - Tue, Aug 18
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
