CURT Class 1, 1-1/4" Trailer Tow Hitch

Like all CURT custom trailer hitches, each class 1 trailer hitch is designed to fit a specific vehicle application. A vehicle-specific design ensures the best possible fit with the simplest and most secure installation. This particular class 1 hitch offers a custom fit for certain years of the Saab 9-3 (to verify vehicle compatibility, see the application information or use the Vehicle Lookup tool). The custom-fit design optimizes the installation to eliminate all unnecessary modifications, and it promotes an integrated look with the vehicle�s existing design features and layout. This Saab 9-3 hitch is rated to tow up to 2,000 lbs. gross trailer weight and 200 lbs. tongue weight. This makes it an excellent choice for any cargo carrier or bike rack as well as a variety of lightweight trailers (never exceed the lowest-rated towing component). It features a 1-1/4" x 1-1/4" receiver tube to accept a ball mount or other trailer hitch accessories. The hitch receiver tube also has an open back to allow for easy cleaning as needed. To ensure the safety of you and your passengers, as well as your fellow adventurers on the road, each CURT trailer hitch has been stringently tested in accordance with SAE J684. We maintain a dedicated Engineering facility near Detroit, MI -- the heart of the automotive industry -- to test all of our hitches to strictest safety standards. Our in-house testing technology allows for real-time, on-vehicle testing, placing our hitches under the same stresses present in actual towing conditions. This gives us the utmost confidence in each trailer hitch we make and provides you with a dependable tool to freely pursue your passions.

Trailer Wiring

CURT custom wiring is the best option for equipping your vehicle with a trailer wiring connector. It offers a vehicle-specific solution with no need for cutting, splicing or soldering. However, if custom wiring is not available for your specific vehicle, CURT offers the taillight converter -- a universal trailer wiring option. This CURT taillight converter provides a standard 4-way flat connection for hooking up your trailer lights to your vehicle. It features highly durable construction, able to withstand harsh elements, road salt and vibrations. The converter is built with a potted enclosure in which the electrical components are encased in a solid compound that seals them off from moisture and impacts. Even when mounted outside, underneath the vehicle, it provides long-lasting dependability. This taillight converter is compatible with a wide variety of vehicles, including models from Dodge, Ford, GM, Honda, Kia, Mazda, Nissan, Subaru, Toyota, Volkswagen, Volvo and many others (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). The converter is designed to convert a 3-wire vehicle system to function with a 2-wire trailer system. The converter features color-coded wires and a wiring guide for easier installation, and it comes with snap locks for a secure connection (a powered taillight converter wiring kit, such as the CURT #55151, is also required for installation). Most CURT taillight converters are constructed with surface-mount technology or SMT. This type of circuitry features smaller electrical components that mount directly to the face of the circuit board, resulting in reduced heat generation, enhanced performance under vibration conditions, maximum light intensity and maximum operating life. CURT converters are also fully tested, both optically and load-tested, to ensure reliable performance.