Ask a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Battery-Powered | Yes |
| Converter Type | Circuit Protected and Powered |
| Electrical System Type | 3W |
| Finish | N/A |
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
| Side Application Type Description | Blank |
| T-Connector Location | P3,P4 |
| Tail Light Circuits | 6.0 Amps |
| Turn and Brake Circuits | 3.0 Amps |
| Warranty | One-Year Limited Warranty |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2007 - 2012 | Nissan Versa | Hatchback |
Yes, the 07-12 Nissan Versa Hatchback CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2086) is designed to fit the 2007-2012 Nissan Versa.
The 07-12 Nissan Versa Hatchback CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2086) fits 2007-2012 Nissan Versa models. The 2012 model year is the last year covered by this part number. For newer models, check for an updated version.
The 07-12 Nissan Versa Hatchback CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2086) fits the following vehicles: 2007-2012 Nissan Versa. Always verify your specific year, make, and model before ordering.
The 07-12 Nissan Versa Hatchback CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2086) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The Curt 56021 is designed for use only on 12 volt negative ground systems. It cannot be used on positive ground systems or vehicles with different electrical configurations.
The maximum fuse rating is 10 amps. The fuse holder with 10 amp fuse must be installed after all other installation steps are complete.
12 GA (12 gauge) wire or larger must be used for the power wire connection to the vehicle battery.
Yes. You must disconnect the negative battery cable before wiring the power wire to avoid electrical hazards and potential damage.
A ring terminal must be used for the battery connection. The ring terminal of the white ground wire should be attached to the vehicle body using the screw provided.
The converter should be mounted using the double-sided tape provided with the kit.
A 3/32 inch hole should be drilled if necessary to attach the ring terminal of the white ground wire to the vehicle body. Drilling is only required if a suitable existing hole is not available.
Route the 12 GA wire from the converter to the vehicle battery location, taking care to avoid pinch points and hot or rotating components. The black wire connects to the positive battery terminal. Secure the power wire to the vehicle chassis using the cable ties provided.
When passing the power wire through sheet metal, use an existing grommet, add a new grommet, or apply silicone to protect the power wire from sharp edges.
The converter has four output wires: Green for right turn signal, Red for brake, Yellow for left turn signal, and Brown for taillight. If using the converter as a powered module for a two-wire system, the red brake wire must be grounded.
Before drilling, check for miscellaneous items that may be behind or under any surface to avoid personal injury or property damage.
The fuse should be installed after all other installation steps are complete. This is the final step in the installation process.
No. The Curt 56021 is designed only for 12 volt negative ground systems. Verify your vehicle's electrical system before purchasing.
12 GA (12 gauge) wire or larger is required for the power wire connection.
Yes, disconnect the negative battery cable before wiring the power wire.
Drilling a 3/32 inch hole is required only if a suitable existing hole is not available for the ground wire attachment.
The maximum fuse rating is 10 amps. Install the fuse after all other steps are complete.
Green = right turn, Red = brake, Yellow = left turn, Brown = taillight. For two-wire systems, the red brake wire must be grounded.
Total for 4 items:
$187.71$189.85
On Sale Today
Original price was $113.90. Current price is $111.76.You save $2.14
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Sep 6 - Wed, Sep 9
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
