Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
| Finish | GLOSS BLACK POWDER COAT |
| Main Body Shape | Square |
| Material | Carbon Steel |
| Mount Type Description | Blank |
| Receiver Tube Size | 1-1/4 IN |
| Side Application Type Description | Blank |
| Tongue Weight (TW) | 200 LB |
| Warranty | Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
| Weight Carrying Capacity (WC) | 2,000 LB |
| Side Application Type Description | Blank |
| Tongue Weight (TW) | 350 LB |
| Warranty | Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
| Drop | 3-1/4 IN |
| Finish | GLOSS BLACK POWDER COAT |
| Gross Trailer Weight (GTW) | 3,500 LB |
| Material | Blank |
| Mount Type Description | Blank |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2011 - 2014 | Ford Mustang | Convertible, excluding California Special |
The 11 - 14 Ford Mustang Convertible, excluding California Special 1.25in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit by CURT HWA961 (Part #HWA961) fits the following vehicles: 2011-2014 Ford Mustang. Always verify your specific year, make, and model before ordering.
The 11 - 14 Ford Mustang Convertible, excluding California Special 1.25in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit by CURT HWA961 (Part #HWA961) fits 2011-2014 Ford Mustang models. The 2014 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 11 - 14 Ford Mustang Convertible, excluding California Special 1.25in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit by CURT HWA961 (Part #HWA961) is designed to fit the 2011-2014 Ford Mustang.
The 11 - 14 Ford Mustang Convertible, excluding California Special 1.25in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit by CURT HWA961 (Part #HWA961) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, CURT part number 11210 is designed for 2011-Present Ford Mustang Coupe and Convertible models. The hitch is a weight-carrying style with a maximum trailer weight capacity of 2,000 lbs and tongue weight capacity of 200 lbs. Always verify your vehicle matches these specifications before purchasing.
CURT 11210 is designed for use with ballmount #D-20/45520. Euro mount options are also available: #45561 (1 7/8" ball) and #45562 (2" ball).
CURT 11210 has a maximum trailer weight capacity of 2,000 lbs and a tongue weight capacity of 200 lbs. However, you must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower than the hitch rating.
You will need: a pry bar, a ratchet, an 11/16" socket, a torque wrench, and safety glasses. Using proper tools will greatly improve the quality of the installation and reduce the time required.
No, drilling is not required. CURT 11210 uses fishwire hardware to route bolts through existing frame rail access holes.
Two people may be required to ease installation. The manual recommends contacting an authorized CURT installer if you are hesitant to undertake this task on your own. Technical support is available at 877-287-8634.
You must lower the exhaust to access the frame rails, but you do not need to fully remove it. Remove the rearmost rubber isolator on both mufflers, then loosen the strap that fastens the exhaust pipes together behind the muffler and gently pull the mufflers downward. After installation, re-install the exhaust.
Fishwire is used to route the 7/16" x 1 1/2" carriage bolts and SP2 spacers through the frame rail access holes. Thread the fishwire and bolts through the access holes, but do not pull the bolts through the side of the frame rails until the hitch is raised into position. Once the hitch is in place, feed the fishwire ends through the mounting holes on the hitch frame brackets and pull the bolts through the holes in the side of the frame rails and hitch frame brackets. Secure with 7/16" flange nuts.
All 7/16" hardware (bolts and flange nuts) must be torqued to 70 ft/lbs.
CURT 11210 includes: 4 bolts (7/16-14 UNC, 1-1/2", Grade 8, yellow zinc, part 10-10282), 4 serrated flange nuts (7/16-14 UNC, Grade 8, yellow zinc, part 20-00103), 4 square hole spacers (0.250 x 0.88 x 2.25", part CM-SP2), and 4 pieces of 7/16" fishwire (part 7_16 FISHWIRE).
Safety glasses must be worn at all times while installing this product. Before you begin installation, read all instructions thoroughly. If you are hesitant to undertake this task on your own, contact an authorized CURT installer.
All non-trailer (wheel-less) loads applied to this product must be supported by 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. CURT recommends the use of 18050 stabilizing straps for all non-trailer loads. See the CURT catalog or visit www.curtmfg.com for further information.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This ongoing inspection is critical to safe operation.
CURT Manufacturing LLC warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT may repair or replace the product at their option when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this product voids the warranty. CURT's liability is limited to repair or replacement of products found to be defective and specifically excludes liability for incidental or consequential loss or damage.
Yes, CURT 11210 fits 2011-Present Ford Mustang Coupe and Convertible models. Maximum towing capacity is 2,000 lbs trailer weight and 200 lbs tongue weight.
No, no drilling is required. The hitch uses fishwire hardware to route bolts through existing frame rail access holes.
You need: pry bar, ratchet, 11/16" socket, torque wrench, and safety glasses.
All 7/16" hardware must be torqued to 70 ft/lbs.
Yes, you must lower the exhaust by removing the rearmost rubber isolator on both mufflers and loosening the strap that fastens the exhaust pipes together, then gently pulling the mufflers downward. Re-install the exhaust after hitch installation.
Maximum capacity is 2,000 lbs trailer weight and 200 lbs tongue weight, but you must never exceed your vehicle manufacturer's recommended towing capacity.
On Sale Today
Original price was $388.80. Current price is $312.60.You save $76.20 (20%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Wed, Aug 26 - Sat, Aug 29
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.