Ask a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Converter Type | Circuit Protected |
| Electrical System Type | 3W |
| Finish | N/A |
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
| Side Application Type Description | Blank |
| T-Connector Location | P3,P4 |
| Tail Light Circuits | 7.5 Amps |
| Turn and Brake Circuits | 3.0 Amps |
| Warranty | One-Year Limited Warranty |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2011 - 2015 | Hyundai Elantra | Sedan |
The 11-15 Hyundai Elantra Sedan CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1410) fits the following vehicles: 2011-2015 Hyundai Elantra. Always verify your specific year, make, and model before ordering.
Yes, the 11-15 Hyundai Elantra Sedan CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1410) is designed to fit the 2011-2015 Hyundai Elantra.
The 11-15 Hyundai Elantra Sedan CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1410) fits 2011-2015 Hyundai Elantra models. The 2015 model year is the last year covered by this part number. For newer models, check for an updated version.
The 11-15 Hyundai Elantra Sedan CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1410) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, Curt part 56126 is designed for the Hyundai Elantra. The manual does not specify model year restrictions, so contact Curt technical support at 1-877-287-8634 to confirm your vehicle's year and trim are compatible.
You will need a drill with a 3/32" bit (if drilling a new grounding hole), a screwdriver, and basic hand tools. The kit includes an eyelet and screw for the ground wire. A Phillips or flat-head screwdriver is needed to remove plastic fasteners from the rear scuff panel and felt trunk liner.
Open the trunk and remove the rear scuff panel by removing three plastic fasteners and pulling up. On the driver side, remove two plastic fasteners holding the felt trunk liner in place and pull back the liner to reveal the vehicle's taillight wiring harness connectors. The connectors may be wrapped in foam.
Separate the vehicle's taillight wiring harness connectors carefully, taking care not to damage the locking tabs. Insert the T-Connector end with the yellow wire between the separated connectors. Make sure the connectors are fully inserted with locking tabs in place. Repeat on the passenger side using the T-Connector end with the green wire.
Locate a flat spot on the vehicle's frame near the taillight connectors and adhere the black converter box using the double-sided tape provided in the kit.
Only if a suitable grounding point does not already exist near the connector. If you must drill, create a 3/32" hole and secure the white ground wire using the eyelet and screw provided. Before drilling, verify that miscellaneous items hidden behind or under surfaces will not be damaged.
Drill a 3/32" hole for the ground wire. The kit includes an eyelet and screw to secure the white ground wire in the hole.
The white ground wire must be secured to a grounding point on the vehicle's frame. You can use an existing screw with nut in the frame, or drill a 3/32" hole and secure the wire using the eyelet and screw provided.
Before drilling, verify that miscellaneous items hidden behind or under any surface will not be damaged. This is critical to avoid damage to the vehicle and personal injury.
Route the T-Connector end with the green wire across to the passenger side behind the rear scuff panel. This keeps the wiring concealed and protected.
Re-install all items removed during installation, including the felt trunk liner and rear scuff panel.
Yes, the Curt 56126 is designed for the Hyundai Elantra. Confirm your vehicle year with Curt technical support at 1-877-287-8634.
Drilling is required only if no existing grounding point is available. If drilling, use a 3/32" bit. Always verify hidden items behind surfaces before drilling.
A drill with 3/32" bit (if drilling), screwdriver, and basic hand tools. The kit includes eyelet and screw for grounding.
The T-Connector inserts between the vehicle's taillight harness connectors (yellow wire on driver side, green wire on passenger side). The white ground wire connects to the vehicle frame.
Total for 4 items:
$163.71
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Wed, Aug 12 - Sat, Aug 15
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
