98-09 Volkswagen Beetle Hatchback, excluding gas turbo and AdBlue tank CURT 4-flat Plug and Play Trailer WiringCURT$66.76In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Battery-Powered | Yes |
| Converter Type | Circuit Protected and Powered |
| Electrical System Type | 3W |
| Finish | N/A |
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
| Side Application Type Description | Blank |
| T-Connector Location | P3,P4 |
| Tail Light Circuits | 6.0 Amps |
| Turn and Brake Circuits | 3.0 Amps |
| Warranty | One-Year Limited Warranty |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2012 - 2019 | Volkswagen Beetle | Convertible, excluding AdBlue tank |
The 12-19 Volkswagen Beetle Convertible, excluding AdBlue tank CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2467) fits 2012-2019 Volkswagen Beetle models. The 2019 model year is the last year covered by this part number. For newer models, check for an updated version.
The 12-19 Volkswagen Beetle Convertible, excluding AdBlue tank CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2467) fits the following vehicles: 2012-2019 Volkswagen Beetle. Always verify your specific year, make, and model before ordering.
Yes, the 12-19 Volkswagen Beetle Convertible, excluding AdBlue tank CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2467) is designed to fit the 2012-2019 Volkswagen Beetle.
The 12-19 Volkswagen Beetle Convertible, excluding AdBlue tank CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2467) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the Curt 56380 Custom Wiring Harness is designed for Volkswagen Beetle passenger cars. The installation locations are behind the driver side taillight housing (P3) and passenger side taillight housing (P4), both accessed from inside the trunk.
The harness is rated for 3.0 amps per side on signal circuits and 6.0 amps total on tail/running circuits. The battery connection must be fuse-protected with a 10-amp maximum fuse. Do not exceed the product rating or the tow vehicle lamp load rating, whichever is lower, as exceeding this can cause loss of warranty, overheating and potential fire.
You will need: ratchet, ratchet extension, T-30 Torx bit, panel trim removal tool, wire stripper, wire crimper, cutting tool, and fish wire.
The manual does not explicitly state whether the battery must be disconnected before installation. Consult your vehicle owner's manual or contact the vehicle manufacturer for safety guidance specific to your Beetle.
Open the vehicle trunk and remove all trunk floor coverings and storage trays to access the installation area.
Remove the fastener and center latch cover securing the rear scuff panel, then pull the scuff panel straight up. Take care not to damage the alignment tabs on the back of the panel.
The taillight wiring harness connectors are located behind the interior side felt liner. Access them by removing the fasteners securing the interior side felt liner and locating the access panel. The connectors will be similar to those on the custom wiring harness.
Separate the connectors from the taillight housing by pulling back on the red locking tab and pressing down on the main locking tab. Take care not to damage the locking tabs during this process.
Insert the custom wiring harness end with the yellow wire between the separated driver side connectors. Make sure the connectors are fully inserted with locking tabs in place.
You may use an existing screw with nut in the vehicle's frame as a grounding point, or drill a 3/32" pilot hole for the provided screw if no suitable existing point is available. The area should be free of rust, dirt and paint before securing the white ground wire using the ring terminal and provided screw.
Drill a 3/32" pilot hole for the provided ground screw. Before drilling, check for miscellaneous items that may be hidden behind or under any surface to avoid damage and personal injury.
Route the custom wiring harness end with the green wire down behind the interior side felt liner and out to the passenger side behind the removed scuff panel. Repeat the driver side installation steps (3-6) on the passenger side using the harness end with the green wire.
Locate a flat spot inside the vehicle near the taillight and adhere the black converter box using the provided double-sided tape.
Route the black power wire from the vehicle battery as shown on the included CME-PCL-INS sheet. The battery connection must be fuse-protected with a 10-amp maximum fuse.
When not in use, roll up the 4-flat connector and store it in a convenient, out-of-the-way location inside the trunk. When in use, route it to the center of the vehicle and out of the trunk.
Secure any loose wires with the provided cable ties to prevent tangling and ensure proper routing.
Test for proper function by using a test light or connecting a properly wired trailer. All steps must be followed to ensure the wiring harness will function properly.
Reinstall all items removed during installation, including trunk floor coverings, storage trays, scuff panel, and interior side felt liner. Install the provided 4-flat dust cover to help prevent corrosion.
The battery connection must be fuse-protected with a 10-amp maximum fuse. Exceeding this rating can cause loss of warranty, overheating and potential fire.
Yes, the Curt 56380 Custom Wiring Harness is designed for Volkswagen Beetle passenger cars, with installation points behind both driver and passenger side taillight housings.
You will need: ratchet, ratchet extension, T-30 Torx bit, panel trim removal tool, wire stripper, wire crimper, cutting tool, and fish wire.
Drilling may be required: you can use an existing screw in the vehicle frame for grounding, or drill a 3/32" pilot hole if no suitable existing point is available.
The battery connection must be fuse-protected with a 10-amp maximum fuse. Exceeding this can cause loss of warranty, overheating and potential fire.
Signal circuits are rated for 3.0 amps per side; tail/running circuits are rated for 6.0 amps total. Do not exceed the product rating or tow vehicle lamp load rating, whichever is lower.
Test for proper function using a test light or by connecting a properly wired trailer.
On Sale Today
Original price was $118.90. Current price is $114.76.You save $4.14
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Thu, Aug 13 - Sun, Aug 16
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 4 items:
$190.71$194.85
No reviews have been added for this product.