Ask a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2013 - 2020 Nissan Pathfinder
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Finish | N/A |
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
| Side Application Type Description | Blank |
| T-Connector Location | S3,S5 |
| Warranty | One-Year Limited Warranty |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2013 - 2020 | Nissan Pathfinder | — |
The 13-20 Nissan Pathfinder CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2046) fits the following vehicles: 2013-2020 Nissan Pathfinder. Always verify your specific year, make, and model before ordering.
Yes, the 13-20 Nissan Pathfinder CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2046) is designed to fit the 2013-2020 Nissan Pathfinder.
The 13-20 Nissan Pathfinder CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2046) fits 2013-2020 Nissan Pathfinder models. The 2020 model year is the last year covered by this part number. For newer models, check for an updated version.
The 13-20 Nissan Pathfinder CURT 4-flat Plug and Play Trailer Wiring (Part #CTW2046) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the Curt 56281 Custom Wiring Connector is designed for the Infiniti QX60. It is also compatible with the Nissan Pathfinder. Both vehicles are in the SUVs, Mini & Full-Sized Vans category.
Yes, the Curt 56281 Custom Wiring Connector is designed for the Nissan Pathfinder. It is also compatible with the Infiniti QX60. Both vehicles are in the SUVs, Mini & Full-Sized Vans category.
The Curt 56281 has two amperage ratings: Signal Circuits are rated at 7.5 amps per side, and Tail/Running Circuits are rated at 7.5 amps total. You must not exceed the product rating or your tow vehicle's lamp load rating, whichever is lower. Exceeding the rating can cause loss of warranty, overheating and potential fire.
You will need: a ratchet, 10mm socket, panel trim removal tool, Phillips screwdriver, cutting tool, and test probe. The 10mm socket is used to remove cargo tie down loops and the three bolts securing the cargo storage tray. The test probe is used to verify proper function after installation.
Yes. Step 1 requires you to locate the vehicle battery on the driver side under the hood and disconnect the negative battery terminal before beginning installation.
You must remove: the cargo storage tray (secured by three 10mm bolts), the trim panel on the back of the cargo storage tray, the center trim piece and scuff panel from the rear, fasteners securing the cargo storage tray, push fasteners holding rear seat covers, and the side floor panel (which is secured by cargo tie down loops removed with a 10mm socket). If your vehicle has a rear subwoofer, you must also carefully remove it by unscrewing the retainer bolt and disconnecting the speaker connector without damaging the locking tabs.
The factory harness is located in the back corner of the side wall panel, behind the driver's side cargo hook floor panel. You will access it after removing the side floor panel (component H) in Step 7.
You need to install five relays total. Three relays must be installed on the harness in the cargo area (Step 7) before connecting the housings to the factory harness. Two additional blue relays must be installed in the vehicle relay box behind the driver-side headlight (Step 11). All relays must be fully inserted with locking tabs in place. Ensure relays are seated on the housing by pulling on them.
The sequence is: (1) Install the three relays on the harness and ensure they are fully seated with locking tabs in place (Step 7); (2) Connect the two relay harness housings into the factory harness, ensuring the locking tab is in place (Step 8); (3) Insert the custom wiring connector end into the white vehicle tow/trailer connector, ensuring full insertion with locking tabs in place (Step 9).
The grey 6-pin tow plug is located on the passenger side, behind the rear bumper. You will locate and open it in Step 12, remove the protective cap, and ensure the connector surfaces are clean and free of dirt before connecting the 4-flat connector.
Connect the 4-flat to the mating end of the grey 6-pin vehicle tow plug located on the passenger side behind the rear bumper. Ensure the connectors are fully inserted with locking tabs in place (Step 13). Before connecting, remove the protective cap and verify that connector surfaces are clean and free of dirt.
Drilling may be required for the ground wire installation. In Step 14, you must locate a suitable grounding point near the connector, such as an existing screw with nut in the vehicle frame. If no suitable existing point is available, you may drill a 3/32" pilot hole for the provided screw. The area must be free of rust, dirt and paint. Before drilling, check for miscellaneous items hidden behind or under any surface to avoid damage and personal injury.
Locate a suitable grounding point near the connector, such as an existing screw with nut in the vehicle frame. If no suitable existing point is available, drill a 3/32" pilot hole for the provided screw. The area must be free of rust, dirt and paint. Secure the white ground wire using the ring terminal and provided screw (Step 14). Before drilling, check for hidden items to avoid damage and personal injury.
When in use, route the 4-flat to the center of the vehicle and out of the trunk. When not in use, roll it up and store in a convenient, out-of-the-way location inside the trunk. Secure any loose wires with the provided cable ties (Step 15).
After installation is complete, test for proper function by using a test light or connecting a properly wired trailer. All steps must be followed to ensure the wiring connector functions properly. The test probe (included in required tools) can be used for testing.
After installation: (1) Reinstall all items removed during installation (cargo storage tray, trim panels, side floor panel, and rear subwoofer if equipped); (2) Reconnect the negative battery terminal; (3) Install the provided 4-flat dust cover to help prevent corrosion (Step 16).
Signal Circuits are rated at 7.5 amps per side, and Tail/Running Circuits are rated at 7.5 amps total. You must not exceed the product rating or your tow vehicle's lamp load rating, whichever is lower. Exceeding the rating can cause loss of warranty, overheating and potential fire.
Exceeding the product rating can cause loss of warranty, overheating and potential fire. You must not exceed the product rating (Signal Circuits 7.5 amps per side, Tail/Running Circuits 7.5 amps total) or your tow vehicle's lamp load rating, whichever is lower.
The Curt 56281 fits the Infiniti QX60 and Nissan Pathfinder.
You need a ratchet, 10mm socket, panel trim removal tool, Phillips screwdriver, cutting tool, and test probe.
Yes, you must disconnect the negative battery terminal before beginning installation.
Drilling may be required for the ground wire installation if no suitable existing screw point is available in the vehicle frame. If drilling is needed, you will drill a 3/32" pilot hole.
Signal Circuits are rated at 7.5 amps per side; Tail/Running Circuits are rated at 7.5 amps total. Do not exceed the product rating or tow vehicle lamp load rating, whichever is lower.
Test for proper function by using a test light or connecting a properly wired trailer.
The kit includes the custom wiring connector, three relays for the harness, two blue relays for the vehicle relay box, a white ground wire with ring terminal and provided screw, cable ties, and a 4-flat dust cover.
Total for 4 items:
$194.71$214.85
On Sale Today
You save $20.14 (14%)
Free Shipping
Ships free on all orders
Authorized DealerQuick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Thu, Aug 13 - Sun, Aug 16
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
