Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
| Finish | GLOSS BLACK POWDER COAT |
| Main Body Shape | Round |
| Material | Carbon Steel |
| Mount Type Description | Blank |
| Receiver Tube Size | 1-1/4 IN |
| Side Application Type Description | Blank |
| Tongue Weight (TW) | 200 LB |
| Warranty | Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
| Weight Carrying Capacity (WC) | 2,000 LB |
| Weight Distribution Tongue Weight (WDTW) | n/a |
| Side Application Type Description | Blank |
| Tongue Weight (TW) | 350 LB |
| Warranty | Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
| Drop | 3-1/4 IN |
| Finish | GLOSS BLACK POWDER COAT |
| Gross Trailer Weight (GTW) | 3,500 LB |
| Material | Blank |
| Mount Type Description | Blank |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2016 - 2018 | Honda | Sedan, excluding center exhaust |
The 16 - 18 HONDA Sedan, excluding center exhaust 1.25in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit by CURT HWA1341 (Part #HWA1341) fits the following vehicles: 2016-2018 Honda . Always verify your specific year, make, and model before ordering.
The 16 - 18 HONDA Sedan, excluding center exhaust 1.25in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit by CURT HWA1341 (Part #HWA1341) fits 2016-2018 Honda models. The 2018 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 16 - 18 HONDA Sedan, excluding center exhaust 1.25in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit by CURT HWA1341 (Part #HWA1341) is designed to fit the 2016-2018 Honda .
The 16 - 18 HONDA Sedan, excluding center exhaust 1.25in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit by CURT HWA1341 (Part #HWA1341) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
CURT part number 11604 is designed for 2016-Present Honda Civic Sedan models. If your vehicle is a 2016 or newer Civic Sedan, this hitch is compatible. The manual does not specify compatibility with other body styles (coupe, hatchback) or earlier model years.
The CURT 11604 is rated for a maximum of 2000 lbs trailer weight and 200 lbs tongue weight when used as a weight-carrying hitch. You must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower than the hitch rating.
Non-trailer (wheel-less) loads applied to this hitch must be supported by CURT stabilizing straps part number 18050. Failure to properly support non-trailer loads will void the product warranty. Consult the CURT catalog or www.curtmfg.com for further information on the 18050 straps.
Required tools are: power drill, 1/4" drill bit, 1/2" drill bit, die grinder, ratchet, torque wrench, 11/16" socket, 6" socket extension, paint pen, and safety glasses. Drilling and hole enlargement are required, so a die grinder is essential.
The kit includes: 4× 7/16-14 UNC 1-1/4" Grade 8 carriage bolts (part 10-10281), 4× 7/16-14 UNC serrated flange nuts (part 20-00103), 4× 0.250 × 1.00 × 2.00" square hole spacers (part CM-SP7), and 4× 7/16" fishwires (part 7_16 FISHWIRE).
Two people may be required to ease installation. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance. Technical support is available at 877-287-8634.
Installation is rated as Moderate to Challenging difficulty. The installation requires drilling, die grinding, and the fishwire technique to route fasteners through the frame. Read all instructions thoroughly before beginning.
Yes, drilling is required. You must drill 4 holes in the frame rail: first with a 1/4" drill bit, then enlarge them with a 1/2" drill bit. Additionally, the 2 forward-most holes on each frame rail must be enlarged further using a die grinder.
Drill 4 holes in the frame rail: first use a 1/4" drill bit, then enlarge to 1/2" diameter. The 2 forward-most holes on each frame rail are then enlarged further using a die grinder to accommodate the fishwire technique.
The fishwire technique is used to route fasteners through the frame. Using the enlarged forward-most holes, you thread 7/16" carriage bolts and CM-SP7 spacers through the fishwires into the rear-most holes. This allows fasteners to be installed where direct access is not possible. See the fishwire diagram in the manual for visual guidance.
All fasteners must be torqued to 59 ft-lbs using a torque wrench with an 11/16" socket.
Four fasteners are used: 4× 7/16-14 UNC carriage bolts (part 10-10281) and 4× 7/16-14 UNC serrated flange nuts (part 20-00103). Each bolt is paired with a CM-SP7 spacer.
Fasteners should be loosely fastened in step 6 after the hitch is raised into position and fishwires are removed. They are then torqued to 59 ft-lbs in step 7 as the final step.
1. Mark 4 hole locations using the hitch as a template and a paint pen. 2. Drill holes with 1/4" bit, then enlarge to 1/2". 3. Use die grinder to enlarge the 2 forward-most holes on each frame rail. 4. Fishwire 2 carriage bolts and 2 spacers into rear-most holes. 5. Reverse fishwire 2 carriage bolts and 2 spacers into the frame. 6. Raise hitch into position, remove fishwires, and loosely fasten 4 flange nuts. 7. Torque all fasteners to 59 ft-lbs.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This maintenance is important for safe operation.
Safety glasses must be worn at all times while installing this product. Using proper tools will greatly improve the quality of the install and reduce the time required.
The CURT 11604 is designed for use with ball mount part number 45521. Euro mount options are available: part 45571 (1 7/8" ball) and part 45572 (2" ball).
Yes, CURT part number 11604 is designed for 2016-Present Honda Civic Sedan models.
Maximum 2000 lbs trailer weight and 200 lbs tongue weight. Never exceed your vehicle manufacturer's recommended towing capacity.
Power drill, 1/4" and 1/2" drill bits, die grinder, ratchet, torque wrench, 11/16" socket, 6" socket extension, paint pen, and safety glasses. Drilling and die grinding are required.
Yes. Drill 4 holes with a 1/4" bit, enlarge to 1/2", then use a die grinder to enlarge the 2 forward-most holes further.
Torque all fasteners to 59 ft-lbs using a torque wrench and 11/16" socket.
Two people may be required. If hesitant, contact an authorized CURT installer or call technical support at 877-287-8634.
Safety glasses must be worn at all times during installation.
Non-trailer loads must be supported by CURT stabilizing straps part number 18050. Failure to do so voids the warranty.
On Sale Today
Original price was $432.80. Current price is $426.16.You save $6.64
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 29 - Tue, Sep 1
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.