Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
| Side Application Type Description | Blank |
| T-Connector Location | P3,P4 |
| Tail Light Circuits | 6.0 Amps |
| Turn and Brake Circuits | 3.0 Amps |
| Warranty | One-Year Limited Warranty |
| Battery-Powered | Yes |
| Converter Type | Circuit Protected and Powered |
| Electrical System Type | 3W |
| Finish | N/A |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2016 - 2019 | Honda Civic | Coupe, excluding center exhaust |
The 16-19 HONDA Civic Coupe, excluding center exhaust CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1331) fits 2016-2019 Honda Civic models. The 2019 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 16-19 HONDA Civic Coupe, excluding center exhaust CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1331) is designed to fit the 2016-2019 Honda Civic.
The 16-19 HONDA Civic Coupe, excluding center exhaust CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1331) fits the following vehicles: 2016-2019 Honda Civic. Always verify your specific year, make, and model before ordering.
The 16-19 HONDA Civic Coupe, excluding center exhaust CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1331) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The Curt 56324 is designed for Honda Civic coupes. The manual specifically lists 'Honda Civic coupe' as the application. If you have a different Civic body style (sedan, hatchback, or convertible), you should verify compatibility with the manufacturer or a fitment database, as the manual does not confirm fitment for other variants.
The Curt 56324 has two amperage ratings: Signal Circuits are rated at 3.0 amps per side, and Tail/Running Circuits are rated at 6.0 amps total. Do not exceed these product ratings or your tow vehicle's lamp load rating, whichever is lower. Exceeding the rating can cause loss of warranty, overheating and potential fire.
You will need: panel trim removal tool, flat blade screwdriver, wire stripper, crimping tool, and cutting tool. The manual also indicates that a drill may be needed if you must create a pilot hole for the ground screw, though an existing screw with nut in the vehicle frame may be available.
Yes. Step 1 of the installation instructions requires you to locate the vehicle battery on the driver side under the hood and disconnect the negative battery terminal before proceeding with any other steps.
Drilling may be required. Step 7 instructs you to locate a suitable grounding point near the connector, such as an existing screw with nut in the vehicle frame. If no existing screw is available, you must drill a 3/32" pilot hole for the provided ground screw. Before drilling, you must check for miscellaneous items that may be hidden behind or under any surface to avoid damage and personal injury.
If an existing screw with nut is not available in the vehicle frame, drill a 3/32" pilot hole for the provided ground screw. The area should be free of rust, dirt and paint before securing the white ground wire using the ring terminal and provided screw.
The battery connection must be fuse-protected with a 10-amp maximum fuse. Exceeding this fuse rating can cause loss of warranty, overheating and potential fire. Do not exceed the product rating or tow vehicle lamp load rating, whichever is lower.
The harness has color-coded ends: the end with the yellow wire connects to the driver side taillight, the end with the green wire connects to the passenger side taillight, and the white wire is the ground wire. The black converter box is mounted inside the vehicle near the taillight. The black power wire routes from the vehicle battery according to the included CME-PCL-INS sheet (which is not detailed in this manual).
Locate a flat spot inside the vehicle near the taillight and adhere the black converter box using the provided double-sided tape. The manual does not specify exact measurements or orientation, only that it should be mounted on a flat surface near the taillight.
After removing the trunk floor coverings and scuff panels, locate the vehicle's taillight wiring harness connectors behind the taillight housing. Insert the custom wiring harness end (yellow wire for driver side, green wire for passenger side) between the separated connectors. Make sure the connectors are fully inserted with locking tabs in place. Take care not to damage the locking tabs during separation and reconnection.
When in use, route the 4-flat to the center of the vehicle. When not in use, roll it up and store in a convenient, out-of-the-way location. Secure any loose wires with the provided cable ties to prevent tangling and damage.
All steps must be followed to ensure the wiring harness functions properly. Once installed, test for proper function by using a test light or connecting a properly wired trailer. The manual does not provide specific test procedures beyond these methods.
Before drilling, check for miscellaneous items that may be hidden behind or under any surface to avoid damage and personal injury. The area where you drill the ground screw pilot hole should be free of rust, dirt and paint.
Open the vehicle trunk and remove: the push fastener securing the trunk floor covering, all trunk floor coverings, the storage tray, the scuff panel (by pulling out on the bottom and then up), and the push fasteners from the felt liner on the driver side. Take care not to damage the alignment tabs on the scuff panel when removing it.
Locate a suitable grounding point near the connector, such as an existing screw with nut in the vehicle frame. If no existing screw is available, drill a 3/32" pilot hole for the provided screw. Ensure the area is free of rust, dirt and paint. Secure the white ground wire using the ring terminal and provided screw.
The Curt 56324 includes: the custom wiring harness with color-coded ends (yellow for driver side, green for passenger side), a white ground wire with ring terminal, a black converter box, a black power wire, a 4-flat connector with dust cover, double-sided tape for mounting the converter box, cable ties for securing loose wires, and a provided ground screw. The package also includes a CME-PCL-INS sheet for battery power wire routing (details not provided in this manual).
Yes, the Curt 56324 is designed for Honda Civic coupes. If you have a different Civic body style, verify compatibility with the manufacturer.
Panel trim removal tool, flat blade screwdriver, wire stripper, crimping tool, cutting tool, and possibly a drill (if no existing ground screw is available).
Only if no existing screw with nut is available in the vehicle frame. If drilling is needed, drill a 3/32" pilot hole. Always check for hidden items before drilling.
10-amp maximum fuse. Do not exceed this rating or the product's amperage specifications (3.0 amps per signal circuit, 6.0 amps total for tail/running circuits).
Test for proper function using a test light or by connecting a properly wired trailer. All installation steps must be followed to ensure proper operation.
Total for 4 items:
$177.71
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Thu, Sep 10 - Sun, Sep 13
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
