18-24 Chevrolet Equinox Excluding diesel CURT 4-flat Plug and Play Trailer WiringCURT$101.76In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Battery-Powered | No |
| Electrical System Type | 2W |
| Finish | N/A |
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
| Side Application Type Description | Blank |
| T-Connector Location | S6 |
| Tail Light Circuits | 7.5 Amps |
| Turn and Brake Circuits | 7.5 Amps |
| Warranty | One-Year Limited Warranty |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2018 | Chevrolet Equinox | Excluding diesel |
Yes, the 18-18 Chevrolet Equinox Excluding diesel CURT 4-flat Plug and Play Trailer Wiring (Part #CTW339) is designed to fit the 2018 Chevrolet Equinox.
The 18-18 Chevrolet Equinox Excluding diesel CURT 4-flat Plug and Play Trailer Wiring (Part #CTW339) fits the following vehicles: 2018 Chevrolet Equinox. Always verify your specific year, make, and model before ordering.
The 18-18 Chevrolet Equinox Excluding diesel CURT 4-flat Plug and Play Trailer Wiring (Part #CTW339) fits 2018 Chevrolet Equinox models. The 2018 model year is the last year covered by this part number. For newer models, check for an updated version.
The 18-18 Chevrolet Equinox Excluding diesel CURT 4-flat Plug and Play Trailer Wiring (Part #CTW339) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The Curt 56375 is a custom wiring connector that provides a 4-flat trailer connector interface for your vehicle. It connects to the vehicle's existing wiring connector located along the rear bumper and allows you to connect a trailer with proper lighting control. The connector includes relays that must be installed in the vehicle's fuse panel (positions K2 and K3) to manage signal and tail/running light circuits.
Yes, the Curt 56375 is designed for Chevrolet Equinox SUVs, Mini & Full-Sized Vans (S). The connector mounts behind the center of the rear bumper. If you have a different vehicle model or year, contact the manufacturer or consult a fitment database to confirm compatibility.
You need a flat blade screwdriver and a cutting tool. The screwdriver is used to remove the fuse panel cover, and the cutting tool may be needed during installation. The manual does not specify additional tools or whether professional installation is recommended.
The kit includes the custom wiring connector, two relays (for installation in fuse panel positions K2 and K3), a 4-flat dust cover, and cable ties for securing loose wires.
The vehicle wiring connector is located along the rear bumper, behind the center. It will be similar in appearance to the custom wiring connector included in the kit. You will separate this connector from the weather seal connector as the first step of installation.
1. Locate the vehicle wiring connector along the rear bumper. 2. Carefully separate the vehicle connector from the weather seal connector, taking care not to damage the locking tabs. 3. Insert the custom wiring connector end into the vehicle connector. 4. Ensure the connectors are fully inserted with locking tabs in place. The connectors must be fully seated for proper function.
The two relays must be installed in the vehicle's fuse panel in positions K2 and K3. To access the fuse panel: 1. Open the vehicle tailgate. 2. On the driver side, locate the fuse access panel cover on the side trim. 3. Remove the fuse panel cover. 4. Install the relays in positions K2 and K3 as shown on the fuse cover. 5. Reinstall the fuse panel cover.
When in use, route the 4-flat out from the vehicle. When not in use, roll it up and store it in a convenient, out-of-the-way location. Secure any loose wires with the provided cable ties to prevent damage and maintain a neat appearance.
The provided 4-flat dust cover helps prevent corrosion of the connector. Install it after the custom wiring connector is fully connected to the vehicle connector. The manual does not provide specific installation details beyond this instruction.
Signal Circuits are rated at 7.5 amps per side. Tail/Running Circuits are rated at 7.5 amps total. Do not exceed these ratings or your tow vehicle's lamp load rating, whichever is lower. Exceeding the product rating can cause loss of warranty, overheating and potential fire.
The Curt 56375 is rated for Signal Circuits at 7.5 amps per side and Tail/Running Circuits at 7.5 amps total. You must not exceed the product rating or your tow vehicle's lamp load rating, whichever is lower. Check your vehicle owner's manual or contact the vehicle manufacturer for your specific tow vehicle lamp load rating. Exceeding either limit can cause loss of warranty, overheating and potential fire.
After installation, test for proper function by using a test light or by connecting a properly wired trailer. All steps must be followed to ensure the wiring connector functions properly before relying on it for towing.
The Curt 56375 is designed for Chevrolet Equinox SUVs, Mini & Full-Sized Vans (S). For other vehicles, contact the manufacturer or check a fitment database.
The manual does not mention drilling. The connector plugs into the existing vehicle wiring connector along the rear bumper.
Signal Circuits: 7.5 amps per side. Tail/Running Circuits: 7.5 amps total. Do not exceed these ratings or your vehicle's lamp load rating, whichever is lower.
Exceeding the product rating can cause loss of warranty, overheating and potential fire. Do not exceed the product rating or your tow vehicle's lamp load rating, whichever is lower.
Total for 2 items:
$357.75$446.56
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Aug 9 - Wed, Aug 12
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.