Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
1982 - 2002 Chevrolet Camaro
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 1982-2002 Chevrolet Camaro All
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Chevrolet Camaro and Pontiac Firebird (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
Will not fit with twin tailpipes
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 Chevrolet Camaro All Class 1 Hitch, 1-1/4" Ball Mount, Select Pontiac Firebird, Chevrolet Camaro
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Yes, the 1982-2002 Chevrolet Camaro All Class 1 Hitch, 1-1/4" Ball Mount (Part #CHD-111173-001) is designed to fit the 1982-2002 Chevrolet Camaro.
The 1982-2002 Chevrolet Camaro All Class 1 Hitch, 1-1/4" Ball Mount (Part #CHD-111173-001) fits 1982-2002 Chevrolet Camaro models. The 2002 model year is the last year covered by this part number. For newer models, check for an updated version.
The 1982-2002 Chevrolet Camaro All Class 1 Hitch, 1-1/4" Ball Mount (Part #CHD-111173-001) fits the following vehicles: 1982-2002 Chevrolet Camaro. Always verify your specific year, make, and model before ordering.
The 1982-2002 Chevrolet Camaro All Class 1 Hitch, 1-1/4" Ball Mount (Part #CHD-111173-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Curt part number 111173 is designed for 1982–2002 Chevrolet Camaro and 1982–2002 Pontiac Firebird and Trans Am models only. If your vehicle is a different year or model, this hitch will not fit.
The manual specifies a gross load capacity of 2,000 lbs trailer weight and 200 lbs tongue weight when used as a weight-carrying hitch. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower. Check your vehicle's owner manual for the final towing limit.
The kit includes: 1 fishwire tool (1/2"), 6 square hole spacers (CM-SP3, 0.250 x 1.25 x 2.00"), 6 hex flange nuts (HFN 1213), and 6 carriage bolts (1/2-13 x 1 3/4").
Yes. The first installation step requires you to lower the vehicle exhaust system by detaching it from the exhaust hanger bracket on each side. The exhaust is raised back into position in step 8, after the hitch is installed.
Yes. Installation requires drilling two holes in the frame rails using a 9/16" drill bit. The hitch is used as a template to mark the center of the forward-most hole on each frame rail (step 4), then the holes are drilled (step 5) before the hitch is raised into final position.
All 1/2" fasteners must be torqued to 110 lb.-ft. This is applied in the final assembly step (step 9) after the hitch is raised into position.
1. Lower the exhaust system. 2. Fishwire two 1/4" blocks and 1/2" carriage bolts through the access hole on the inboard side of the frame rails and through the two existing rearward holes. 3. Raise the hitch and loosely install 1/2" nuts on the carriage bolts. 4. Use the hitch as a template to mark the center of the forward-most hole on the frame rails. 5. Lower the hitch and drill the marked holes with a 9/16" drill bit. 6. Fishwire a 1/4" block and 1/2" carriage bolt through the access hole and into the newly drilled hole. 7. Raise the hitch and install all fasteners. 8. Raise the exhaust system back into position. 9. Torque all 1/2" fasteners to 110 lb.-ft.
All non-trailer loads applied to this hitch must be supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
Do not exceed your vehicle manufacturer's recommended towing capacity. Although the hitch is rated for 2,000 lbs trailer weight and 200 lbs tongue weight, your vehicle may have a lower limit. Always follow your vehicle manufacturer's specifications.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This ongoing inspection helps maintain the integrity and safety of the installation.
The fishwire tool (1/2") is used to thread the carriage bolts and spacer blocks through the access holes on the inboard side of the frame rails. It is used in steps 2 and 6 to route fasteners through existing and newly drilled holes.
You will need a 9/16" drill bit, a wrench or socket to fit 1/2" fasteners, and a torque wrench capable of measuring 110 lb.-ft. The fishwire tool (1/2") is included in the kit. A jack or lift may be needed to lower and raise the exhaust system.
The Curt 111173 fits 1982–2002 Chevrolet Camaro and 1982–2002 Pontiac Firebird and Trans Am models only.
The hitch is rated for 2,000 lbs trailer weight and 200 lbs tongue weight, but you must not exceed your vehicle manufacturer's recommended towing capacity.
Yes, you must drill two 9/16" holes in the frame rails. The hitch is used as a template to mark the hole locations.
You must lower the exhaust system by detaching it from the exhaust hanger brackets on each side. It is raised back into position after installation.
All 1/2" fasteners must be torqued to 110 lb.-ft.
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 1982 - 2002 | Chevrolet Camaro | — |
On Sale Today
Original price was $503.85. Current price is $478.71.You save $25.14 (5%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Fri, Aug 14 - Mon, Aug 17
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
