Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2016 - 2024 Chevrolet Camaro
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2016-2024 Chevrolet Camaro All
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Cadillac CTS and Chevrolet Camaro (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
Installation requires minor fascia trimming
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Chevrolet Camaro All Class 1 Hitch, 1-1/4" Ball Mount, Select Camaro, Cadillac CTS (Fascia Trimming)
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2016 - 2024 | Chevrolet Camaro | — |
The 2016-2024 Chevrolet Camaro All Class 1 Hitch, 1-1/4" Ball Mount (Part #CHD-119003-002) fits 2016-2024 Chevrolet Camaro models. The 2024 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 2016-2024 Chevrolet Camaro All Class 1 Hitch, 1-1/4" Ball Mount (Part #CHD-119003-002) is designed to fit the 2016-2024 Chevrolet Camaro.
The 2016-2024 Chevrolet Camaro All Class 1 Hitch, 1-1/4" Ball Mount (Part #CHD-119003-002) fits the following vehicles: 2016-2024 Chevrolet Camaro. Always verify your specific year, make, and model before ordering.
The 2016-2024 Chevrolet Camaro All Class 1 Hitch, 1-1/4" Ball Mount (Part #CHD-119003-002) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, CURT hitch 119003 is designed for 2016-present Cadillac CTS(V) sedans. It mounts directly to the existing vehicle frame studs on both sides and requires no drilling.
Yes, CURT hitch 119003 is designed for 2016-present Chevrolet Camaro coupes. It mounts to existing vehicle frame studs on both sides with no drilling required.
Yes, CURT hitch 119003 is compatible with CTS-V models. During installation, CTS-V models require removal of four T20 Torxbit screws connecting the heat shield to the fascia in step 2, in addition to the standard M4 screws.
CURT hitch 119003 has a gross load capacity of 2,000 lbs trailer weight and 200 lbs tongue weight when used as a weight-carrying hitch. However, you must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower.
The hitch weight is 27 lbs.
Required tools are: ratchet, torque wrench, aviation shears, 8-inch extension, T15 Torxbit socket, T20 Torxbit socket, T45 Torxbit socket, 7mm socket, 8mm socket, 15mm socket, and plastic pry bar. Safety glasses should be worn at all times during installation.
Two people may be required to ease installation. The manual recommends reading all instructions thoroughly before beginning and notes that using proper tools will greatly improve installation quality and reduce time required.
Professional installation time is approximately 90 minutes. Novice (DIY) installation time is approximately 180 minutes (3 hours).
No, drilling is not required. The hitch mounts directly to existing vehicle frame studs using existing hardware.
Installation requires removal of: four T15 screws along the wheel well (two per side), twelve M4 screws on the bottom of the bumper fascia, two M4 screws from the wheel well cover (one per side), two T45 bolts inside the trunk (one per side), eight M5 nuts from the taillights (four per side), and eight M10 nuts from the bumper beam (four per side). CTS-V models also remove four T20 Torxbit screws from the heat shield. All fasteners except the M10 nuts are reinstalled in reverse order in step 12.
Installation sequence is: (1) remove wheel well screws, (2) remove bumper fascia bottom screws, (3) remove wheel well cover screws, (4) remove trunk liner caps and bolts, (5) remove trunk liner guard and access clips, (6) remove and set aside taillights, (7) remove bumper fascia and unclip motion sensor harness, (8) remove bumper beam, (9) install hitch on frame studs and reinstall bumper beam loosely, (10) torque M10 hardware to 45 ft-lbs, (11) trim bumper fascia with aviation shears, (12) reinstall all removed components in reverse order, (13) installation complete.
Yes, bumper fascia trimming is required. Use aviation shears to trim the fascia according to the trim diagram. For CTS models, the approximate cutout dimension is 2.50 inches by 5.00 inches, centered on the bumper fascia. For Camaro models, the approximate cutout dimension is 2.50 inches by 3.00 inches, centered on the bumper fascia.
All M10 hardware must be torqued to 45 ft-lbs. This is performed in step 10 after the bumper beam is loosely secured over the hitch.
No. In step 9, the bumper beam is loosely secured with M10 hardware. The fasteners are then torqued to 45 ft-lbs in step 10.
In step 7, the motion sensor harness on the driver side of the vehicle is unclipped when removing the rear bumper fascia. The harness is set aside for reinstallation in step 12.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. The manual does not specify a retorque interval.
Safety glasses must be worn at all times during installation. Never exceed your vehicle manufacturer's recommended towing capacity. The manual recommends contacting an authorized CURT installer if you are hesitant to undertake the installation yourself.
CURT hitch 119003 is designed for use with ball mount #45521. Optional euro mount options available are #45571 (1 7/8-inch ball) and #45572 (2-inch ball).
Yes, CURT recommends the use of model 18050 stabilizing straps for all non-trailer (wheel-less) loads. See the CURT catalog or visit www.curtmfg.com for further information.
CURT Manufacturing warrants this product to be free of defects in material and workmanship at the time of retail purchase by the original purchaser. If defective, CURT may repair or replace the product at their option when returned prepaid with proof of purchase. Alteration, misuse, or improper installation voids the warranty. CURT's liability is limited to repair or replacement of defective products and excludes liability for incidental or consequential loss or damage.
Yes. It fits 2016-present CTS(V) sedans and Camaro coupes. No drilling required; uses existing frame studs.
Torque wrench, ratchet, aviation shears, T15/T20/T45 Torxbit sockets, 7mm/8mm/15mm sockets, 8-inch extension, plastic pry bar, and safety glasses.
No. The hitch mounts to existing vehicle frame studs using existing hardware. No drilling is required.
Yes. Use aviation shears to trim the fascia. CTS models: 2.50" × 5.00" cutout centered on fascia. Camaro models: 2.50" × 3.00" cutout centered on fascia.
Torque all M10 hardware to 45 ft-lbs. This is the only torque specification provided in the manual.
2,000 lbs trailer weight and 200 lbs tongue weight. Never exceed your vehicle manufacturer's recommended towing capacity.
Professional: 90 minutes. DIY/novice: 180 minutes. Two people may be required to ease installation.
On Sale Today
Original price was $415.85. Current price is $395.75.You save $20.10 (5%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Fri, Aug 14 - Mon, Aug 17
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.