2000-2005 Toyota Celica Coupe Class 1 Trailer Hitch, 1-1/4" Ball MountCURTOriginal price was $524.85. Current price is $494.87.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2000-2005 Toyota Celica Coupe
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Toyota Celica and Echo (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2000, 2001, 2002, 2003, 2004, 2005 Toyota Celica Coupe Class 1 Trailer Hitch, 1-1/4" Receiver, Select Toyota Celica, Echo
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2000 - 2005 | Toyota Celica | Coupe |
Yes, the 2000-2005 Toyota Celica Coupe Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11289-001) is designed to fit the 2000-2005 Toyota Celica.
The 2000-2005 Toyota Celica Coupe Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11289-001) fits the following vehicles: 2000-2005 Toyota Celica. Always verify your specific year, make, and model before ordering.
The 2000-2005 Toyota Celica Coupe Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11289-001) fits 2000-2005 Toyota Celica models. The 2005 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2000-2005 Toyota Celica Coupe Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11289-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, Curt part number 11289 is designed for 2000-2005 Toyota Celica and 2000-2005 Echo models. The hitch mounts at existing weldnuts on the frame rails where the factory tie-down brackets are located, and no drilling is required.
Yes, the Curt 11289 receiver hitch is designed for use with ballmount #55001 or #45501.
The manual specifies a gross load capacity when used as a weight-carrying hitch, but the specific trailer weight and tongue weight values are not filled in on the document provided. Contact Curt Manufacturing technical support at 877-287-8634 for the exact capacity, and always verify that your vehicle's towing capacity is not exceeded.
The hitch includes four M10x1.25 hex head cap screws (HHCS), class 10.9, zinc-plated (part number 10-10298) and four S-CON washers, 3/8 inch, zinc-plated (part number 30-00148). These four fastener sets mount the hitch at the existing weldnuts on the frame rails.
You will need: one 14mm socket, one 17mm socket, two 12-inch extensions, one ratchet, and one torque wrench. These tools are used to remove the tie-down brackets and install the hitch fasteners at the existing weldnuts.
No, drilling is not required. The Curt 11289 mounts at existing weldnuts on the frame rails where the factory tie-down brackets are located.
Locate and remove the left and right tie-down brackets from under the vehicle and return them to the vehicle's owner. The hitch will mount in place of these brackets using the same fastener sets at the existing weldnuts.
All fasteners must be torqued to 48 ft-lb using a torque wrench.
Do not exceed your vehicle manufacturer's recommended towing capacity. The hitch has a gross load capacity when used as a weight-carrying hitch, but you must verify this does not exceed what your specific vehicle is rated for. Contact Curt Manufacturing at 877-287-8634 for the hitch capacity specifications.
Non-trailer loads can be applied to this hitch, but they must be supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This helps maintain the integrity and safety of the installation.
Curt Manufacturing warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If defective, Curt may repair or replace the product at their option when returned prepaid with proof of purchase. The warranty is voided by alteration, misuse, or improper installation.
Yes. The hitch mounts at existing weldnuts on the frame rails where factory tie-down brackets are located.
No drilling is required. The hitch uses existing weldnuts on the frame rails.
14mm socket, 17mm socket, two 12-inch extensions, ratchet, and torque wrench.
All fasteners must be torqued to 48 ft-lb.
Non-trailer loads must be supported by auxiliary stabilizing straps. Failure to do so voids the warranty.
Periodically check that all fasteners are tight and structural components are sound.
On Sale Today
Original price was $528.85. Current price is $503.16.You save $25.69 (5%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Tue, Sep 1 - Fri, Sep 4
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.