Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2003 Volkswagen Golf GTI 20th Anniversary
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Volkswagen Beetle, Golf and Golf City (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Golf and GTI applications start at 1999.5
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
2003 Volkswagen Golf GTI 20th Anniversary Class 1 Trailer Hitch, 1-1/4" Receiver, Select Volkswagen Beetle, Golf, City
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2003 | Volkswagen Golf | GTI 20th Anniversary |
Yes, the 2003 Volkswagen Golf GTI 20th Anniversary Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11066-010) is designed to fit the 2003 Volkswagen Golf.
The 2003 Volkswagen Golf GTI 20th Anniversary Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11066-010) fits 2003 Volkswagen Golf models. The 2003 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2003 Volkswagen Golf GTI 20th Anniversary Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11066-010) fits the following vehicles: 2003 Volkswagen Golf. Always verify your specific year, make, and model before ordering.
The 2003 Volkswagen Golf GTI 20th Anniversary Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11066-010) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, hitch 11066 fits 1999 Q1–2006 Volkswagen Golf Hatchback models, except VR6, R32 and 4-Motion variants. Confirm your vehicle is not one of these excluded models before purchasing.
No. Hitch 11066 is designed for 1998–2010 Volkswagen Beetle including Convertible, but specifically excludes Turbo models.
Hitch 11066 is designed for use with ball mount D-55010 or 45510. Verify compatibility with your chosen ball mount before installation.
The gross load capacity when used as a weight-carrying hitch is 2,000 lbs trailer weight and 200 lbs tongue weight. Do not exceed your vehicle manufacturer's recommended towing capacity, as that is the limiting factor.
Non-trailer loads may be applied to this hitch only if they are fully supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
The kit includes: one 3/8-16 UNC × 1-3/4" hex head cap screw (grade 8, yellow zinc); five 3/8-16 UNC × 1-1/4" hex head cap screws (grade 8, yellow zinc); six 3/8" flat washers (cadmium zinc); six 3/8-16 UNC serrated flange nuts (grade 8, yellow zinc); one 1/2-13 UNC × 1-1/4" hex bolt; one 1/2-13 UNC handle nut (grade 8, cadmium zinc); one 1/2" flat washer (yellow zinc); one 1/2" split-cone toothed washer (yellow zinc); and one 0.500 × 1.25 × 2.50" round hole spacer.
Yes, the manual recommends temporarily removing the spare tire to ease installation. It should be reinstalled after the hitch is secured.
Yes, the manual recommends temporarily lowering the exhaust to ease installation. It should be restored to its normal position after the hitch is secured.
Yes, drilling is required. You will drill one 3/8" hole, one 1/2" hole, and five additional 3/8" holes into the trunk pan. The hitch and its plates serve as templates for hole placement.
Drill one 3/8" hole aligned with the second hole forward from the tie-down loop opening on the passenger side plate. Drill one 1/2" hole using the slot in the passenger side plate as a template. Drill five additional 3/8" holes using the driver side plates as templates.
1. Align the hitch and drill the first 3/8" hole on the passenger side. Loosely install the long 3/8" bolt, fender washer, spacer, and hex flange nut. 2. Drill the 1/2" hole using the slot as a template. Loosely install the 1/2" bolt, conical toothed washer, flat washer, and handle nut. 3. With the hitch square on the vehicle, drill the five remaining 3/8" holes on the driver side. Install short 3/8" bolts, fender washers, and hex flange nuts. 4. Torque all fasteners to specification and apply silicone sealer to holes.
All 3/8" hardware must be torqued to 45 lb.-ft.
All 1/2" hardware must be torqued to 110 lb.-ft.
The handle nut may be cut off after installation if needed. This is optional and depends on clearance and your preference.
Yes, apply silicone sealer to all holes drilled in the trunk pan after torquing all fasteners. This prevents water intrusion and corrosion.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This helps maintain safety and prevent loosening due to vibration and use.
Yes, if it is a 1998–2010 Beetle (except Turbo), 1999 Q1–2006 Golf Hatchback (except VR6, R32, 4-Motion), 1999 Q1–2005 GTI Coupe, or 2007–2009 City Golf (Canadian only). Check your model year and variant.
2,000 lbs trailer weight and 200 lbs tongue weight, but do not exceed your vehicle manufacturer's recommended towing capacity.
Torque all 1/2" hardware to 110 lb.-ft. and all 3/8" hardware to 45 lb.-ft.
Yes, the manual recommends temporarily removing the spare tire and lowering the exhaust to ease installation.
Non-trailer loads must be fully supported by auxiliary stabilizing straps. Failure to do so voids the warranty.
On Sale Today
Original price was $486.85. Current price is $464.31.You save $22.54 (5%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Mon, Aug 10 - Thu, Aug 13
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.