Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2005-2008 Ford Mustang All, Except GT
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Ford Mustang (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes ball mount #45521, installation hardware, pin & clip
2005, 2006, 2007, 2008 Ford Mustang All, Except GT Class 1 Trailer Hitch, 1-1/4" Ball Mount, Select Ford Mustang
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2005 - 2008 | Ford Mustang | All, Except GT |
The 2005-2008 Ford Mustang All, Except GT Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-113123-001) fits the following vehicles: 2005-2008 Ford Mustang. Always verify your specific year, make, and model before ordering.
Yes, the 2005-2008 Ford Mustang All, Except GT Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-113123-001) is designed to fit the 2005-2008 Ford Mustang.
The 2005-2008 Ford Mustang All, Except GT Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-113123-001) fits 2005-2008 Ford Mustang models. The 2008 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2005-2008 Ford Mustang All, Except GT Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-113123-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, hitch 113123 is designed for Ford Mustang V6 models only. It does not fit V8 Mustangs.
Hitch 113123 is designed for use with ballmount #55001 or #45501.
No, drilling is not required. The hitch uses existing holes in the frame and an access hole in the driver side frame rail.
You need a 7/16" fishwire tool (CM-438-FW, included), a wrench or socket for 7/16" fasteners, and a torque wrench. The manual also recommends removing the 2 rear exhaust hangers for ease of installation.
All 7/16" fasteners must be torqued to 70 lb-ft.
Do not exceed your vehicle manufacturer's recommended towing capacity. The manual states the hitch has a gross load capacity when used as a weight-carrying hitch, but the specific values are not provided in this document. Contact Curt Technical Support at 1-800-798-0813 for capacity details.
Non-trailer loads may be applied to this hitch only if they are supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
The package includes: 1 carriage bolt (7/16-14 x 1 1/2), 4 round hole spacers (CM-SP32, .188 x 1.50 x 2.00"), 1 square hole spacer (CM-SP2, .250 x .88 x 2.25"), 5 large hex flange nuts (7/16-14), 4 hex bolts (7/16-14 x 5), and 1 fishwire tool (CM-438-FW).
No. Hitch 113123 is designed exclusively for Ford Mustang V6 models and does not fit V8 Mustangs.
Yes. Remove the 2 rear exhaust hangers before installation for ease of access. These hangers are reused and must be reinstalled after the hitch is secured.
Use the included 7/16" fishwire tool (CM-438-FW) to thread the 7/16" carriage bolt and spacer through the access hole in the driver side frame rail, out through the existing hole, and into the hitch mount. Secure with a flange nut.
1. Remove the 2 rear exhaust hangers. 2. Raise the hitch into position and secure with 7/16" carriage bolts, spacers, and flange nuts. 3. Use the fishwire tool to thread the carriage bolt and spacer through the driver side frame rail access hole, out the existing hole, and into the hitch mount; secure with a flange nut. 4. Torque all 7/16" fasteners to 70 lb-ft. 5. Reinstall the exhaust hangers.
All fasteners are 7/16" diameter: 1 carriage bolt (7/16-14 x 1 1/2), 4 hex bolts (7/16-14 x 5), and 5 large hex flange nuts (7/16-14). Spacers include 4 round hole spacers (.188 x 1.50 x 2.00") and 1 square hole spacer (.250 x .88 x 2.25").
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound.
Curt Manufacturing warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If defective, Curt may repair or replace the product at their option when returned prepaid with proof of purchase. Alteration, misuse, or improper installation voids the warranty. Curt's liability is limited to repair or replacement and excludes incidental or consequential loss or damage.
On Sale Today
Original price was $407.85. Current price is $304.92.You save $102.93 (25%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Aug 9 - Wed, Aug 12
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.