1999-2001 Hyundai Sonata Sedan Class 1 Trailer Hitch, 1-1/4" Ball MountCURTOriginal price was $535.85. Current price is $354.89.Out of Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2006-2010 Hyundai Sonata Sedan
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Hyundai Sonata (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes ball mount #45521, installation hardware, pin & clip
2006, 2007, 2008, 2009, 2010 Hyundai Sonata Sedan Class 1 Trailer Hitch, 1-1/4" Ball Mount, Select Hyundai Sonata
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2006 - 2010 | Hyundai Sonata | Sedan |
The 2006-2010 Hyundai Sonata Sedan Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-113253-001) fits 2006-2010 Hyundai Sonata models. The 2010 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 2006-2010 Hyundai Sonata Sedan Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-113253-001) is designed to fit the 2006-2010 Hyundai Sonata.
The 2006-2010 Hyundai Sonata Sedan Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-113253-001) fits the following vehicles: 2006-2010 Hyundai Sonata. Always verify your specific year, make, and model before ordering.
The 2006-2010 Hyundai Sonata Sedan Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-113253-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, part number 11325 is designed for the Hyundai Sonata GL and GLS models. It is a Class II receiver hitch that uses existing weldnuts in both frame rails, so no drilling is required. Confirm your vehicle is a GL or GLS trim level before purchasing.
The Curt 11325 is designed for use with ballmount #55001 or #45501. Verify the ballmount part number before purchase to ensure compatibility.
The manual lists a gross load capacity when used as a weight-carrying hitch, but the specific trailer weight and tongue weight values are not filled in on this copy of the manual. Contact Curt Manufacturing technical support at 1-800-798-0813 for the exact capacity specifications for your vehicle.
You will need: ratchet, 10mm long socket, 9/16" socket, 11/16" socket, torque wrench, pen or marker, aviation shears, and rotary tool. The rotary tool and aviation shears are for trimming the bumper fascia and underbody panel as needed.
The kit includes: four M10 × 30 hex bolts, five 3/8" conical toothed washers, one 3/8"-16 hex nut, one 3/8"-16 × 1¾" carriage bolt, and one 0.250" spacer (part number CM-11325-SP). The hitch uses existing weldnuts in the vehicle's frame rails.
Yes. First, remove the plastic underbody panel (8 fasteners) if present. Then remove the passenger side muffler heat shield by removing the two rearmost muffler mounts, which allows access to the four heat shield mounting fasteners and the forward-most frame weldnut. This provides clearance for the hitch installation.
Place the rectangular spacer with the 3/8" carriage bolt through the tow loop. Raise the hitch into position over the existing muffler heat shield(s). Notch the bumper fascia on the driver side as needed to allow the hitch to sit properly.
The four M10 × 30 hex bolts attach to the existing weldnuts in both frame rails—two on the driver side and two on the passenger side. These bolts secure the hitch to the vehicle's frame.
The 3/8" carriage bolt passes through the tow loop with the rectangular spacer. On the hitch plate side, install a 3/8" conical toothed washer and 3/8" hex nut, then tighten to secure the bolt.
All M10 fasteners must be torqued to 48 ft-lbs.
All 3/8" fasteners must be torqued to 45 ft-lbs.
No. The Curt 11325 requires no drilling. It uses existing weldnuts in the vehicle's frame rails.
Yes, the installation may require fascia trimming. Specifically, you may need to notch the bumper fascia on the driver side to allow the hitch to sit properly. Use a rotary tool and aviation shears for this trimming.
Yes, the installation may require underbody panel trimming. After installing the hitch, trim and reattach the plastic underbody panel as shown in the diagram. Use aviation shears or a rotary tool for trimming.
All non-trailer loads applied to this hitch must be supported by auxiliary stabilizing straps. The manual does not specify a weight limit for non-trailer loads, but failure to properly support them will void the product warranty.
No. Do not exceed your vehicle manufacturer's recommended towing capacity. The hitch itself has a rated capacity, but you must also comply with your vehicle's limits.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This maintenance is important for safe operation and to maintain warranty coverage.
The manual states to periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound, but does not specify an exact interval. Regular inspection before towing is recommended.
Yes, the Curt 11325 is designed for Hyundai Sonata GL and GLS models. It uses existing frame rail weldnuts, so no drilling is required.
You need: ratchet, 10mm long socket, 9/16" socket, 11/16" socket, torque wrench, pen/marker, aviation shears, and rotary tool.
No drilling is required. The hitch uses existing weldnuts in the frame rails. You may need to trim the bumper fascia and underbody panel.
Torque all M10 fasteners to 48 ft-lbs and all 3/8" fasteners to 45 ft-lbs.
Remove the plastic underbody panel (8 fasteners) and the passenger side muffler heat shield by removing the two rearmost muffler mounts and four heat shield fasteners.
The manual does not provide the specific capacity values. Contact Curt Manufacturing at 1-800-798-0813 for exact specifications. Do not exceed your vehicle manufacturer's recommended towing capacity.
On Sale Today
Original price was $407.85. Current price is $304.92.You save $102.93 (25%)
Free Shipping
Ships free on all orders
Authorized Dealer
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 8 - Tue, Aug 11
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.