2006-2010 Hyundai Sonata Sedan Class 1 Trailer Hitch, 1-1/4" Ball MountCURTOriginal price was $407.85. Current price is $304.92.Out of Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2006-2010 Hyundai Sonata Sedan
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Hyundai Sonata (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2006, 2007, 2008, 2009, 2010 Hyundai Sonata Sedan Class 1 Trailer Hitch, 1-1/4" Receiver, Select Hyundai Sonata
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2006 - 2010 | Hyundai Sonata | Sedan |
The 2006-2010 Hyundai Sonata Sedan Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11325-001) fits 2006-2010 Hyundai Sonata models. The 2010 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2006-2010 Hyundai Sonata Sedan Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11325-001) fits the following vehicles: 2006-2010 Hyundai Sonata. Always verify your specific year, make, and model before ordering.
Yes, the 2006-2010 Hyundai Sonata Sedan Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11325-001) is designed to fit the 2006-2010 Hyundai Sonata.
The 2006-2010 Hyundai Sonata Sedan Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11325-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the Curt 11325 is designed for Hyundai Sonata GL and GLS models. It is compatible with existing weldnuts in both frame rails and requires no drilling.
The manual states a gross load capacity of 2,000 lbs trailer weight and 200 lbs tongue weight when used as a weight-carrying hitch. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower.
You will need: ratchet, 10mm long socket, 9/16" socket, 11/16" socket, torque wrench, pen or marker, aviation shears, and rotary tool.
The kit includes: four M10×1.25×30 mm class 10.9 hex head cap screws (part 10-10271), one 3/8-16 UNC carriage bolt 1-3/4" long grade 8 (part 10-10473), one 3/8-16 UNC hex nut grade 8 (part 20-00166), one 3/8" S-CON washer (part 30-00148), four 7/16" S-CON washers (part 30-00163), and one 0.250" spacer (part CM-11325-SP).
No. The Curt 11325 requires no drilling. It uses existing weldnuts in both frame rails.
You may need to notch the bumper fascia on the driver side. The manual states "Notch bumper fascia as needed on drivers side" during installation step 3.
You may need to trim the plastic underbody panel. The manual states you should "Trim and reattach plastic underbody panel as shown, if needed" in step 6. You will also need to remove it initially in step 1 to access the muffler heat shield.
Yes. You must remove the passenger side muffler heat shield by first removing the two rearmost muffler mounts. This allows access to the four heat shield mounting fasteners and the forward-most frame weldnut.
All 10mm fasteners must be torqued to 48 ft-lbs.
All 3/8" fasteners must be torqued to 45 ft-lbs.
1. Remove plastic underbody panel fasteners if needed. 2. Remove passenger side muffler heat shield by removing two rearmost muffler mounts, then remove four heat shield fasteners and access the forward-most frame weldnut. 3. Place rectangular spacer with 3/8" carriage bolt through tow loop and raise hitch into position over muffler heat shield(s); notch bumper fascia on driver side as needed. 4. Install 10mm fasteners into existing weldnuts in frame rails; install 3/8" conical toothed washer and 3/8" nut through hitch plate and secure to hitch. 5. Torque all 10mm fasteners to 48 ft-lbs and all 3/8" fasteners to 45 ft-lbs. 6. Trim and reattach plastic underbody panel as shown if needed.
All non-trailer loads applied to this hitch must be supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound.
The Curt 11325 is designed for use with ballmount #55001 or #45501.
Curt Manufacturing warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If defective, Curt may repair or replace the product at their option when returned prepaid with proof of purchase. Alteration, misuse, or improper installation voids the warranty. Curt's liability is limited to repair or replacement of defective products and excludes liability for incidental or consequential loss or damage.
Yes, the Curt 11325 is designed for Hyundai Sonata GL and GLS models.
No drilling is required. The hitch uses existing weldnuts in the frame rails.
You may need to notch the driver side bumper fascia and trim the plastic underbody panel as needed.
You will need a ratchet, 10mm long socket, 9/16" socket, 11/16" socket, torque wrench, pen/marker, aviation shears, and rotary tool.
Torque all 10mm fasteners to 48 ft-lbs and all 3/8" fasteners to 45 ft-lbs.
The hitch has a gross load capacity of 2,000 lbs trailer weight and 200 lbs tongue weight, but you must not exceed your vehicle manufacturer's recommended towing capacity.
On Sale Today
Original price was $410.85. Current price is $311.08.You save $99.77 (24%)
Free Shipping
Ships free on all orders
Authorized Dealer
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 15 - Tue, Aug 18
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.