Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2006 - 2014 Honda Ridgeline
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2006-2014 Honda Ridgeline All
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Honda Ridgeline (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 Honda Ridgeline All Class 3 Trailer Hitch, 2" Receiver, Select Honda Ridgeline
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2006 - 2014 | Honda Ridgeline | — |
The 2006-2014 Honda Ridgeline All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13385-001) fits 2006-2014 Honda Ridgeline models. The 2014 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 2006-2014 Honda Ridgeline All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13385-001) is designed to fit the 2006-2014 Honda Ridgeline.
The 2006-2014 Honda Ridgeline All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13385-001) fits the following vehicles: 2006-2014 Honda Ridgeline. Always verify your specific year, make, and model before ordering.
The 2006-2014 Honda Ridgeline All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13385-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, Curt part number 13385 is designed for Honda Ridgeline. Confirm your vehicle model matches before purchase.
As a weight-carrying hitch: 5,000 lbs trailer weight and 500 lbs tongue weight. As a weight-distribution hitch: 6,000 lbs trailer weight and 600 lbs tongue weight. Do not exceed your vehicle manufacturer's recommended towing capacity.
No, drilling is not required. The hitch uses existing factory weldnuts on the frame rails and bumper beam.
Ratchet, 3" extension, 10" extension, 17mm socket, 20mm socket, 5/8" wrench, pry bar, and torque wrench.
Yes. Lower the exhaust hangers at the front and rear of the muffler before raising the hitch into position. The hitch sits between the exhaust pipe and vehicle frame. Reinstall the exhaust hangers after securing the hitch.
Torque all M12 fasteners to 86 lb-ft first, then all M10 fasteners to 48 lb-ft. Tighten the 3/8" nylock nut until the washer contacts the isolator, then confirm engagement of the nylock with the stud thread.
The hitch weight is 38 lbs.
The estimated install time is 30 minutes.
Yes, hanger relocation is required. The rear exhaust hanger is relocated and installed onto the hitch exhaust stud, then retained with a 3/8-16 nylock hex nut and washer.
The kit includes: 2× M10×1.25×30 mm hex head cap screws (HHCS), 2× 3/8" conical washers, 6× 1/2" conical washers, 6× M12×1.25×40 mm hex head cap screws, 1× 3/8-16 nylon lock nut, and 1× 3/8" flat washer.
Finger tighten all fasteners first (M12 bolts to frame rails and M10 bolts to bumper beam), then torque in two stages: torque all M12 fasteners to 86 lb-ft first, then torque all M10 fasteners to 48 lb-ft.
The hitch attaches to the frame rails using M12 bolts and conical washers, and to the bumper beam using M10 bolts and conical washers. It is positioned between the exhaust pipe and vehicle frame.
The rear exhaust hanger is installed onto the hitch exhaust stud and retained with a 3/8-16 nylon lock hex nut and a 3/8" flat washer. Tighten the nylock nut until the washer contacts the isolator, then confirm engagement of the nylock with the stud thread.
Torque all M10 fasteners to 48 lb-ft. These fasteners secure the hitch to the bumper beam.
Torque all M12 fasteners to 86 lb-ft. These fasteners secure the hitch to the frame rails.
Tighten the 3/8-16 nylock nut until the washer contacts the isolator. Then confirm engagement of the nylock with the stud thread to ensure it will not loosen.
Curt Manufacturing warrants the hitch to be free of defects in material and workmanship at the time of retail purchase by the original purchaser. If defective, Curt may repair or replace it at their option when returned prepaid with proof of purchase. Warranty is voided by alteration, misuse, or improper installation.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. No specific interval is stated in the manual.
On Sale Today
Original price was $483.85. Current price is $356.71.You save $127.14 (26%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Wed, Sep 30 - Sat, Oct 3
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.