Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2007 - 2013 Mitsubishi Outlander
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2007-2013 Mitsubishi Outlander All
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Mitsubishi Outlander (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2007, 2008, 2009, 2010, 2011, 2012, 2013 Mitsubishi Outlander All Class 3 Trailer Hitch, 2" Receiver, Select Mitsubishi Outlander
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2007 - 2013 | Mitsubishi Outlander | — |
The 2007-2013 Mitsubishi Outlander All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13581-001) fits the following vehicles: 2007-2013 Mitsubishi Outlander. Always verify your specific year, make, and model before ordering.
Yes, the 2007-2013 Mitsubishi Outlander All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13581-001) is designed to fit the 2007-2013 Mitsubishi Outlander.
The 2007-2013 Mitsubishi Outlander All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13581-001) fits 2007-2013 Mitsubishi Outlander models. The 2013 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2007-2013 Mitsubishi Outlander All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13581-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, Curt part number 13581 is designed for the Mitsubishi Outlander. The manual does not specify model years or trim levels, so contact Curt technical support at 1-877-187-8634 to confirm your specific vehicle year and configuration.
No, drilling is not required. The hitch uses existing factory weldnuts on the frame rails for fastening.
The exhaust must be lowered before installation. Step 1 requires removing the rearmost three exhaust hangers to lower the exhaust. After the hitch is installed and fastened, the exhaust is raised back into position and all three hangers are re-attached.
The kit includes: 6 × 3/8" S-CON washers (part 30-00148), 1 × 1/2-13 UNC carriage bolt 1-3/4" grade 8 (part 10-10272), 1 × 1/2-13 UNC serrated flange nut grade 8 (part 20-00062), 1 × 0.250 × 1.50 × 2.00" square hole spacer (part CM-SP1), and 6 × M10 × 1.25 × 30 mm class 10.9 hex head cap screws (part 10-10271).
The manual does not specify which tools are required. Contact Curt technical support at 1-877-187-8634 for a complete tool list. At minimum, you will need wrenches or sockets to fit 1/2" and M10 fasteners, and a torque wrench to achieve the specified torque values.
1. Lower the exhaust by removing the rearmost three exhaust hangers. 2. Raise the hitch into position with a strap to the passenger side of the tow loop. 3. Insert the 1/2-13 carriage bolt through spacer CM-SP1, the tow loop, and the hitch; fasten finger tight with the 1/2" flange nut. 4. Install all M10 hardware with 3/8" conical washers through the hitch and into the frame. 5. Torque all 1/2" hardware to 110 ft-lb and all M10 hardware to 48 ft-lb. 6. Raise the exhaust back into position and re-attach all three exhaust hangers.
Torque the 1/2" hardware to 110 ft-lb.
Torque all M10 hardware to 48 ft-lb.
No. The manual states: 'ALL NON-TRAILER LOADS APPLIED TO THIS PRODUCT MUST BE SUPPORTED BY AUXILIARY STABILIZING STRAPS.' Failure to properly support non-trailer loads will void the product warranty.
Do not exceed your vehicle manufacturer's recommended towing capacity. The manual emphasizes this with a warning: 'DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.' Consult your Mitsubishi Outlander owner's manual for the specific limit.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. The manual does not specify a maintenance interval, so perform these checks regularly, especially before towing.
Yes, the Curt 13581 is designed for the Mitsubishi Outlander. Confirm your specific model year with Curt technical support at 1-877-187-8634.
No, drilling is not required. The hitch fastens to existing factory weldnuts on the frame.
The exhaust must be temporarily lowered by removing three hangers during installation, then re-attached afterward. No permanent modifications are required.
Torque 1/2" hardware to 110 ft-lb and M10 hardware to 48 ft-lb.
Non-trailer loads must be supported by auxiliary stabilizing straps. Failure to do so voids the warranty.
On Sale Today
Original price was $483.85. Current price is $356.71.You save $127.14 (26%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Thu, Aug 13 - Sun, Aug 16
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.