Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2007 - 2015 Audi Q7
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Shipping Weight | 2.000 |
| Axles | 1-4 |
| Mount Angles | Various |
| Warranty | Limited Lifetime |
| Display | OLED Screen |
| Finish | Black |
| Activation | Tri-axis inertia |
| Level Adjust | Auto |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2007 - 2015 | Audi Q7 | — |
The 2007-2015 Audi Q7 All CURT Assure Proportional 1-4 Axel Auto Leveling Motion-Sensing Trailer Brake Controller (Part #CBC1-11) fits the following vehicles: 2007-2015 Audi Q7. Always verify your specific year, make, and model before ordering.
The 2007-2015 Audi Q7 All CURT Assure Proportional 1-4 Axel Auto Leveling Motion-Sensing Trailer Brake Controller (Part #CBC1-11) fits 2007-2015 Audi Q7 models. The 2015 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 2007-2015 Audi Q7 All CURT Assure Proportional 1-4 Axel Auto Leveling Motion-Sensing Trailer Brake Controller (Part #CBC1-11) is designed to fit the 2007-2015 Audi Q7.
The 2007-2015 Audi Q7 All CURT Assure Proportional 1-4 Axel Auto Leveling Motion-Sensing Trailer Brake Controller (Part #CBC1-11) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the CURT 51522 brake control harness is designed for Audi Q5 models. The harness connects to the vehicle's factory brake control connector located underneath the driver-side dash, near the emergency brake pedal.
Yes, the CURT 51522 brake control harness is compatible with Audi SQ5, Q5, and Q7 models. All three vehicles have the brake control connector in the same location: underneath the driver-side dash, left of the steering column, near the emergency brake pedal.
The CURT 51522 is a brake control harness that connects to your vehicle's factory brake control system. It allows you to integrate a separate brake control unit with your Audi's existing brake control connector. The harness must be used with a compatible brake control unit, which is installed and tested according to that unit's separate instruction manual.
You will need: a ratchet, 8mm socket, socket extension, panel trim removal tool, and a cutting tool. These tools are required to remove the dash trim panels and access the brake control connector.
The vehicle brake control connector is located underneath the driver-side dash, left of the steering column, near the emergency brake pedal. You will access it by removing the side trim panel from the dash and the lower dash panel.
Follow these steps in order: (1) Remove the driver-side dash side trim panel. (2) Remove the two bolts securing the lower dash panel from underneath. (3) Remove the two small trim panels on each side of the steering column. (4) Remove the bolts under those small panels. (5) Remove the lower dash panel. (6) Locate the vehicle brake control connector. (7) Remove any foam padding from the connector. (8) Insert the CURT harness connector into the vehicle connector, ensuring it is fully seated with locking tabs in place. (9) Insert the black connector into the brake control quick plug connector. (10) Secure the harness with provided cable ties, avoiding pinch points. (11) Reinstall all trim panels and complete the installation per the brake control unit manual.
First, open the driver-side door and remove the side trim panel from the dash to access one bolt. Then, underneath the dash, locate and remove two more bolts. Next, remove the two small trim panels on each side of the steering column and remove the bolts underneath them. Finally, use a trim panel removal tool to carefully remove the lower dash panel, which will expose the vehicle brake control connector.
Remove any foam padding on the vehicle brake control connector before inserting the CURT harness connector. This ensures a proper connection.
The connector is fully inserted when the locking tabs are in place. Make sure the connector is pushed in completely until you feel the locking tabs engage.
The black connector on the CURT brake control harness plugs into the brake control quick plug connector. This connection allows the harness to communicate with the separate brake control unit.
Secure the brake control harness using the provided cable ties. When routing and securing the harness, avoid any pinch points that could damage the wiring.
After completing the harness installation and reinstalling all trim panels, test the system by following the test procedures in the brake control unit's instruction manual. The brake control unit must be mounted as directed in its manual, and then tested according to those procedures. The harness itself does not have separate test steps.
Yes. Avoid pinch points when securing the harness with cable ties, as this could damage the wiring. Additionally, all installation steps must be followed to ensure the brake control harness functions properly. If you are not comfortable performing this installation, contact CURT at 877.287.8634 for assistance.
Yes, the CURT 51522 brake control harness is designed for Audi Q5, SQ5, and Q7 models. It connects to the factory brake control connector located under the driver-side dash, left of the steering column.
You need a ratchet, 8mm socket, socket extension, panel trim removal tool, and a cutting tool to remove dash panels and access the brake control connector.
Yes, you must remove the lower dash panel to access the vehicle brake control connector. This requires removing the side trim panel, two small trim panels on each side of the steering column, and their securing bolts before using a trim panel removal tool to remove the lower panel.
The manual does not mention drilling. The installation involves removing existing trim panels and connecting the harness to the factory brake control connector without modifications to the vehicle structure.
Avoid pinch points when securing the harness with cable ties. Pinching the wiring could damage it and cause the system to malfunction.
No reviews have been added for this product.
On Sale Today
Original price was $308.90. Current price is $196.98.You save $111.92 (36%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Aug 9 - Wed, Aug 12
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout