Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2009-2017 Volkswagen CC FWD
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Volkswagen Passat and CC (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes ball mount #45521, installation hardware, pin & clip
2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 Volkswagen CC FWD Class 1 Trailer Hitch, 1-1/4" Ball Mount, Select Volkswagen Passat, CC
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2009 - 2017 | Volkswagen CC | FWD |
The 2009-2017 Volkswagen CC FWD Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-110913-001) fits 2009-2017 Volkswagen CC models. The 2017 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 2009-2017 Volkswagen CC FWD Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-110913-001) is designed to fit the 2009-2017 Volkswagen CC.
The 2009-2017 Volkswagen CC FWD Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-110913-001) fits the following vehicles: 2009-2017 Volkswagen CC. Always verify your specific year, make, and model before ordering.
The 2009-2017 Volkswagen CC FWD Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-110913-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, this hitch (part numbers 249091 or 247091) is designed for Volkswagen Passat and CC models. It is designed for use with ballmount #55001 or #45501. Confirm compatibility with your specific model year and consult the vehicle owner's manual regarding any underbody panel or trim panel removal and reinstallation.
The manual specifies a gross load capacity of 2,000 lbs trailer weight and 200 lbs tongue weight when used as a weight-carrying hitch. However, you must not exceed your vehicle manufacturer's recommended towing capacity. Check your vehicle's owner's manual for the maximum towing limit.
Non-trailer loads can be applied to this hitch only if they are supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
The kit includes: 2× carriage bolts (7/16-14 x 1 1/4), 2× square hole spacers (CM-SP11, .250 x 1.00 x 2.50"), 2× hex flange nuts (7/16-14), 1× 7/16" fishwire tool (CM-438-FW), 2× hex bolts (M8-1.25 x 40), 2× lock washers (5/16"), and 2× washers (5/16").
You will need a torx head socket or driver (for underbody panel fasteners), an 8mm hex socket or wrench (for exhaust hanger bracket bolts and M8 fasteners), a 7/16" socket or wrench (for carriage bolts and hex flange nuts), a drill with appropriate bits for drilling the passenger side frame rail, and a cutting tool for trimming the fascia and underbody panels. The kit includes a 7/16" fishwire tool (CM-438-FW) to help route bolts through the frame rail access hole.
Yes. You must remove the underbody panel by removing 5 torx head fasteners from the underbody panel on the passenger side. After installation, you can trim and reinstall the underbody panel if required. Consult your vehicle owner's manual regarding panel removal and reinstallation.
Yes. You must remove 2 hex bolts (8mm) from the exhaust hanger bracket on the driver side. The hitch is then sandwiched between the exhaust hanger bracket and the vehicle frame during installation, and the bracket is reinstalled.
Yes, drilling is required. You must drill holes on the passenger side frame rail. Use the hitch as a template to mark the hole locations. Ensure the hitch is square on the vehicle before drilling. Dimensions are approximate; confirm fit prior to drilling.
Yes, fascia panel trimming is required. Mark and trim the fascia panel for bracket clearance. Dimensions are approximate; confirm fit prior to trimming. Use the ribs of the panels as cutting guides when possible. Refer to the trim diagram for approximate trim locations.
Yes, the underbody panel must be marked and trimmed to fit after hitch installation. Dimensions are approximate; confirm fit prior to trimming. After trimming, you can reinstall the underbody panel if required.
Torque all 8mm fasteners to 23 lb-ft and all 7/16" fasteners to 70 lb-ft. This includes the M8 hex bolts and the 7/16" carriage bolts and hex flange nuts.
1. Remove the underbody panel (5 torx fasteners, passenger side). 2. Remove 2 hex bolts (8mm) from the exhaust hanger bracket (driver side). 3. Mark and trim the fascia panel. 4. Lift the hitch into position, mark passenger side holes, and drill (ensure hitch is square). 5. Use the fishwire tool to route bolts and square hole spacers into the passenger side frame rail through the access hole. 6. Sandwich the hitch between the exhaust hanger bracket and vehicle frame. 7. Install supplied fasteners as shown. 8. Torque all 8mm fasteners to 23 lb-ft and all 7/16" fasteners to 70 lb-ft. 9. Mark, trim, and reinstall the underbody panel if required.
The fishwire tool (CM-438-FW, 7/16") is used to route the carriage bolts and square hole spacers into the passenger side frame rail through the access hole. This allows you to position the fasteners without direct access to the frame rail.
The square hole spacers (CM-SP11, .250 x 1.00 x 2.50", qty 2) are installed on the passenger side frame rail along with the carriage bolts. They help position and support the hitch attachment points on the frame.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This helps maintain the integrity and safety of the installation.
Curt Manufacturing Inc. warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If defective, the product may be repaired or replaced at Curt's option when returned prepaid with proof of purchase. Alteration, misuse, or improper installation voids the warranty.
Call Curt Manufacturing technical support at 1-800-798-0813 for installation questions.
Torque all 8mm fasteners to 23 lb-ft and all 7/16" fasteners to 70 lb-ft.
On Sale Today
Original price was $424.95. Current price is $290.98.You save $133.97 (32%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Thu, Aug 13 - Sun, Aug 16
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.