Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2010 - 2019 Ford Taurus
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2010-2019 Ford Taurus All
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Ford Taurus (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Installation requires hole enlargement and temporary lowering of exhaust
2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 Ford Taurus All Class 3 Trailer Hitch, 2" Receiver, Select Ford Taurus
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2010 - 2019 | Ford Taurus | — |
The 2010-2019 Ford Taurus All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13379-001) fits the following vehicles: 2010-2019 Ford Taurus. Always verify your specific year, make, and model before ordering.
The 2010-2019 Ford Taurus All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13379-001) fits 2010-2019 Ford Taurus models. The 2019 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 2010-2019 Ford Taurus All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13379-001) is designed to fit the 2010-2019 Ford Taurus.
The 2010-2019 Ford Taurus All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13379-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Part number 13379 fits Ford Taurus (SHO) models from 2010-Present in sedan body style. Confirm your vehicle matches these specifications before purchasing. The hitch has a gross load capacity of 4,000 lbs trailer weight and 400 lbs tongue weight.
The hitch supports a maximum of 4,000 lbs trailer weight and 400 lbs tongue weight. You must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower than the hitch rating.
The hitch weight is 30 lbs.
Required tools are: ratchet, torque wrench, 8" socket extension, sockets (10mm, 18mm, 19mm), pry bar, die grinder, spray lubricant, and safety glasses. Using proper tools will greatly improve installation quality and reduce installation time.
The kit includes: 3× 1/2-13 UNC carriage bolts (10-10278), 3× 1/2-13 UNC serrated flange nuts (20-00062), 3× 0.250 x 1.00 x 2.50" square hole spacers (CM-SP10), 2× 1/2" fishwire (1_2 FISHWIRE), 2× 7/16" conical tooth washers (30-00163), 1× 1/2" conical tooth washer (30-00149), 1× M12x1.75x35 hex cap screw (10-10426), 2× 7/16-14 UNC hex cap screws (10-10425), and 2× 7/16-14 UNC handle nuts (20-00172).
Two people may be required to ease installation. The manual recommends reading all instructions thoroughly before beginning and notes that the installation difficulty level is moderate.
Professional installation time is 30 minutes. Novice (DIY) installation time is 60 minutes.
Yes. Step 1 requires lowering the exhaust by removing 2 exhaust hanger brackets from the rubber isolator on each frame rail. The manual notes that removing the exhaust hanger near the exhaust split may ease installation. The exhaust is reinstalled in Step 10 after the hitch is secured.
No drilling is required. However, hole enlargement is required: Step 6 requires enlarging 2 holes on the rear bumper bracket using a die grinder. The manual notes that enlarging the opening may ease installation.
The fishwire technique is used to route spacers and carriage bolts through the frame rail access holes. Step 4 requires fishwiring 1 CM-SP10 spacer and 1 1/2" carriage bolt through the driver side access hole and out the mounting hole. Step 5 requires reverse fishwiring 1 CM-SP10 spacer and 1 1/2" carriage bolt through and out the access hole on each frame rail. The manual references fishwire technique diagrams for visual guidance.
Step 9 specifies: torque 1/2" hardware to 110 ft-lbs, torque M12 hardware to 79 ft-lbs, and torque 7/16" hardware to 59 ft-lbs.
Safety glasses must be worn at all times while installing this product. Before beginning installation, read all instructions thoroughly. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance. Technical support is available at 1-877-287-8634.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This inspection should be performed regularly throughout the life of the hitch.
Yes. CURT recommends the use of 18050 stabilizing straps for all non-trailer (wheel-less) loads. See the CURT catalog or visit www.curtmfg.com for further information.
CURT Manufacturing warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT may repair or replace the product at their option when returned prepaid with proof of purchase. Alteration to, misuse of, or improper installation voids the warranty. CURT's liability is limited to repair or replacement of defective products and excludes liability for incidental or consequential loss or damage.
CURT 13379 fits Ford Taurus (SHO) sedan models 2010-Present only. Confirm your vehicle matches these specifications.
Maximum 4,000 lbs trailer weight and 400 lbs tongue weight. Never exceed your vehicle manufacturer's recommended towing capacity.
Ratchet, torque wrench, 8" socket extension, sockets (10mm, 18mm, 19mm), pry bar, die grinder, spray lubricant, and safety glasses.
No drilling required. Hole enlargement on the rear bumper bracket using a die grinder is required.
1/2" hardware: 110 ft-lbs; M12 hardware: 79 ft-lbs; 7/16" hardware: 59 ft-lbs.
Professional: 30 minutes. Novice (DIY): 60 minutes.
Wear safety glasses at all times. Read all instructions before beginning. Contact an authorized CURT installer if hesitant. Technical support: 1-877-287-8634.
On Sale Today
Original price was $478.85. Current price is $353.71.You save $125.14 (26%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 15 - Tue, Aug 18
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.