Our in-house experts typically reply within one business day.
CURT
On Sale Today
Original price was $520.85. Current price is $380.71.You save $140.14 (27%)
Free Shipping
Ships free on all orders
Authorized Dealer
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Verify Fitment
Select your vehicle to confirm this part fits.
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Thu, Aug 13 - Sun, Aug 16
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2010-2025 Mercedes-Benz Sprinter 3500 Standard bumper, excluding rear door step
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Dodge, Freightliner or Mercedes-Benz Sprinter 1500, 2500 or 3500 (fits standard bumper only; see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025 Mercedes-Benz Sprinter 3500 Standard bumper, excluding rear door step Class 3 Hitch, 2", Select Sprinter 1500, 2500, 3500 (Fits Standard Bumper Only)
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
Yes, the 2010-2025 Mercedes-Benz Sprinter 3500 Standard bumper, excluding rear door step CURT Class 3 Hitch, 2" (Part #CHD-13388-007) is designed to fit the 2010-2025 Mercedes-Benz Sprinter 3500.
The 2010-2025 Mercedes-Benz Sprinter 3500 Standard bumper, excluding rear door step CURT Class 3 Hitch, 2" (Part #CHD-13388-007) fits 2010-2025 Mercedes-Benz Sprinter 3500 models. The 2025 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2010-2025 Mercedes-Benz Sprinter 3500 Standard bumper, excluding rear door step CURT Class 3 Hitch, 2" (Part #CHD-13388-007) fits the following vehicles: 2010-2025 Mercedes-Benz Sprinter 3500. Always verify your specific year, make, and model before ordering.
The 2010-2025 Mercedes-Benz Sprinter 3500 Standard bumper, excluding rear door step CURT Class 3 Hitch, 2" (Part #CHD-13388-007) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, CURT 13388 fits Dodge, Mercedes, and Freightliner Sprinter 2500 and 3500 models equipped with a standard bumper. The manual does not specify year ranges, so contact CURT technical support at 1-877-287-8634 or visit www.curtmfg.com to confirm your specific model year.
The manual specifies this hitch is designed for vehicles with a standard bumper only. If your Sprinter has a custom or aftermarket bumper, contact CURT technical support at 1-877-287-8634 to confirm compatibility.
The manual lists gross load capacity specifications for both weight-carrying and weight-distribution hitch use, but the actual capacity values are not filled in on this copy of the manual. Contact CURT Manufacturing at 1-877-287-8634 or www.curtmfg.com for the specific towing and tongue weight capacities for your vehicle.
Your vehicle has a maximum towing capacity set by Dodge, Mercedes, or Freightliner. Even though the hitch may be rated higher, you must never tow more than your vehicle manufacturer recommends. Check your owner's manual or contact your vehicle dealer for your specific towing limit.
The kit includes: six 7/16-14 UNC hex head cap screws (4-1/2" long, grade 8), six 7/16" flat washers, six 7/16-14 UNC serrated flange nuts, two 1/2" square hole spacers (CM-SP6), two 1/2-13 UNC carriage bolts (1-1/2" long, grade 8), two 1/2-13 UNC serrated flange nuts, and 1/2" fishwire.
No. All fasteners required for installation are included in the kit. The manual does not mention any additional hardware needed.
The manual does not specify which tools are required. Contact CURT technical support at 1-877-287-8634 for a complete tool list. At minimum, you will likely need a torque wrench (to tighten fasteners to 70 and 110 lb-ft), a drill with appropriate bits (for 2500 models), and standard wrenches or sockets.
Drilling is required only for Sprinter 2500 models. The 2500 uses the hitch as a template to drill holes into the bottom of the frame. Sprinter 3500 models have existing holes in the frame and do not require drilling.
The manual does not specify the hole size. Use the hitch as a template to mark and drill the holes into the bottom of the frame. Contact CURT technical support at 1-877-287-8634 if you need the exact hole diameter.
Step 1 instructs you to remove bolts and brackets (1 bolt per bracket) or remove the tow loop (3 bolts per loop) if equipped. This suggests the tow loop removal is conditional on whether your vehicle has one. If your Sprinter has a factory tow loop, remove it before installing the hitch.
The passenger side must be raised into position first. This allows extra space needed to fit around the exhaust on the driver's side.
The 3500 model has existing holes in the frame and uses 7/16" hardware directly. The 2500 model requires you to use the hitch as a template to drill holes into the bottom of the frame before securing with 7/16" hardware. Both models use the same fastener sizes and torque specifications.
In step 4, insert the CM-SP6 spacers and 1/2" carriage bolts through the access hole and out through the drilled hole. The fishwire is included in the kit but the manual does not explain its specific use. Contact CURT technical support at 1-877-287-8634 for clarification on fishwire installation.
Torque all 7/16" hardware to 70 lb-ft and all 1/2" hardware to 110 lb-ft. This applies to both 2500 and 3500 models.
After installation, ensure all fasteners are tight and all structural components are sound. The manual recommends periodically checking the hitch to ensure fasteners remain tight and components remain in good condition during use.
The manual recommends periodically checking the receiver hitch to ensure all fasteners are tight and all structural components are sound. It does not specify an exact interval. Inspect before each towing trip and at regular maintenance intervals.
CURT Manufacturing warrants the product to be free of defects in material and workmanship at the time of retail purchase by the original purchaser. If defective, CURT may repair or replace it at their option when returned prepaid with proof of purchase. The warranty is voided by alteration, misuse, or improper installation.
CURT 13388 complies with New York V.E.S.C. Regulation V-5 and SAE J684 safety specifications and requirements for connecting devices and towing systems.
Yes, CURT 13388 fits Dodge, Mercedes, and Freightliner Sprinter 2500 and 3500 models with a standard bumper.
Drilling is required for 2500 models only. The 3500 has existing frame holes and requires no drilling.
The kit includes six 7/16" hex head cap screws, six 7/16" washers, six 7/16" serrated flange nuts, two 1/2" carriage bolts, two 1/2" serrated flange nuts, two spacers, and fishwire.
Torque all 7/16" hardware to 70 lb-ft and all 1/2" hardware to 110 lb-ft.
Do not exceed your vehicle manufacturer's recommended towing capacity, even if the hitch is rated higher.
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2010 - 2025 | Mercedes-Benz Sprinter 3500 | Standard bumper, excluding rear door step |
No reviews have been added for this product.
