2012-2015 Scion iQ All Class 1 Trailer Hitch, 1-1/4" Ball MountCURTOriginal price was $415.85. Current price is $395.75.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2012 - 2015 Scion iQ
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2012-2015 Scion iQ All
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Scion iQ (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 1,000 lbs. GTW and 150 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2012, 2013, 2014, 2015 Scion iQ All Class 1 Trailer Hitch, 1-1/4" Receiver, Select Scion iQ
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2012 - 2015 | Scion iQ | — |
Yes, the 2012-2015 Scion iQ All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11291-001) is designed to fit the 2012-2015 Scion iQ.
The 2012-2015 Scion iQ All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11291-001) fits 2012-2015 Scion iQ models. The 2015 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2012-2015 Scion iQ All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11291-001) fits the following vehicles: 2012-2015 Scion iQ. Always verify your specific year, make, and model before ordering.
The 2012-2015 Scion iQ All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11291-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, CURT part number 11291 is designed for 2012-Present Scion iQ models. It is a Class 2 compact receiver hitch with a maximum trailer weight capacity of 1,000 lbs and tongue weight capacity of 150 lbs. Always verify your vehicle's manufacturer-recommended towing capacity before towing, as you must not exceed it.
The CURT 11291 has a maximum trailer weight capacity of 1,000 lbs and a maximum tongue weight capacity of 150 lbs. However, you must never exceed your vehicle manufacturer's recommended towing capacity, which may be lower than these ratings.
The CURT 11291 is designed for use with ballmount part number D-55001 / 45501. Euro mount options are available: part number 45571 (1-7/8" ball) and part number 45572 (2" ball).
You will need: a die grinder, ratchet, torque wrench, 9/16" socket, 11/16" socket, 6" extension, and safety glasses. Proper tools will greatly improve the quality of the install and reduce installation time.
The kit includes: 2 x 7/16-14 UNC serrated flange nuts (part 20-00103), 4 x 3/8-16 UNC hex cap screws 1-1/2" (part 10-10234), 4 x 3/8" flat washers (part 30-00186), 2 x 7/16-14 UNC carriage bolts 1-1/2" (part 10-10282), 2 x 0.250 x 1.00 x 2.00" square hole spacers (part CM-SP7), 2 x 7/16" fishwire (part 7_16 FISHWIRE), and 4 x 3/8-16 UNC serrated flange nuts (part 20-00102).
Two people may be required to ease installation. The installation difficulty is rated as moderate to challenging. If you are hesitant to undertake this task on your own, CURT recommends contacting an authorized CURT installer for additional assistance. Technical support is available at 877-287-8634.
Yes. You must enlarge the existing holes on both sides of the frame rail to allow 7/16" carriage bolts and SP7 spacers to pass through. A die grinder is required for this step. The existing hole should be enlarged towards the outside of the frame rail. See the hole enlargement diagram in the installation instructions.
After enlarging the existing holes, you reverse fishwire 7/16" carriage bolts and SP7 spacers through the enlarged access holes on both sides. This technique allows you to position the hardware before raising the hitch into place. Refer to the reverse pull fishwire technique diagram in the installation instructions.
When raising the hitch into position, the side plates will slide between the inside of the tow loops. After loosely securing the hitch to the carriage bolts with 7/16" hex flange nuts, align the holes in the side plates with the holes in the tow loops and secure them using 3/8" hex bolts, 3/8" washers, and 3/8" hex flange nuts.
Torque all 7/16" hardware to 70 ft-lbs. Torque all 3/8" hardware to 45 ft-lbs. Use a torque wrench to ensure proper tightness.
Safety glasses must be worn at all times while installing this product. Before you begin installation, read all instructions thoroughly. If you are hesitant to undertake this task on your own, contact an authorized CURT installer.
All non-trailer (wheel-less) loads applied to this product must be supported by 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. For further information about stabilizing straps, see the CURT catalog or visit www.curtmfg.com.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This ongoing inspection helps maintain the safety and integrity of the hitch.
CURT Manufacturing warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT may repair or replace it at their option when returned prepaid with proof of purchase. Alteration to, misuse of, or improper installation voids the warranty. CURT's liability is limited to repair or replacement of defective products and excludes liability for incidental or consequential loss or damage.
The CURT 11291 complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.
Yes, the CURT 11291 is designed for 2012-Present Scion iQ models with a maximum capacity of 1,000 lbs trailer weight and 150 lbs tongue weight. Always verify your vehicle's manufacturer-recommended towing capacity.
You need: die grinder, ratchet, torque wrench, 9/16" and 11/16" sockets, 6" extension, and safety glasses.
Torque all 7/16" hardware to 70 ft-lbs and all 3/8" hardware to 45 ft-lbs using a torque wrench.
Maximum capacity is 1,000 lbs trailer weight and 150 lbs tongue weight, but you must never exceed your vehicle manufacturer's recommended towing capacity.
Yes, all non-trailer loads must be supported by CURT part number 18050 stabilizing straps, or the warranty is voided.
Installation is rated moderate to challenging and may require 2 people. If hesitant, contact an authorized CURT installer or call technical support at 877-287-8634.
On Sale Today
Original price was $418.85. Current price is $404.00.You save $14.85
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Wed, Sep 16 - Sat, Sep 19
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.