Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2012 Nissan Versa Sedan
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Nissan Versa (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2012 Nissan Versa Sedan Class 1 Trailer Hitch, 1-1/4" Receiver, Select Nissan Versa
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2012 | Nissan Versa | Sedan |
Yes, the 2012 Nissan Versa Sedan Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11256-001) is designed to fit the 2012 Nissan Versa.
The 2012 Nissan Versa Sedan Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11256-001) fits 2012 Nissan Versa models. The 2012 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2012 Nissan Versa Sedan Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11256-001) fits the following vehicles: 2012 Nissan Versa. Always verify your specific year, make, and model before ordering.
The 2012 Nissan Versa Sedan Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11256-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, part number 11256 is designed for Nissan Versa Sedan models from 2012 to current. This is a weight-carrying hitch with a gross load capacity of 2,000 lbs trailer weight and 200 lbs tongue weight.
The hitch is designed for use with ball mount D-20 / 45520. Euro mount options are also available: part number 45561 (1-7/8" ball) and part number 45562 (2" ball).
The hitch has a gross load capacity of 2,000 lbs trailer weight and 200 lbs tongue weight when used as a weight-carrying hitch. However, you must not exceed your vehicle manufacturer's recommended towing capacity.
The hitch weight is 60 lbs.
You will need: ratchet, torque wrench, 3/4" socket, 10" socket extension, aviation shears, die grinder, and safety glasses. Using proper tools will greatly improve the quality of the install and reduce installation time.
Two people may be required to ease installation. The manual recommends reading all instructions thoroughly before beginning and notes that using proper tools will greatly improve the quality of the install and reduce the time required.
Yes. You must enlarge existing holes on both the driver and passenger side of the vehicle to allow the CM-SP17 spacer to pass into the vehicle frame rail. You will also need to trim the heat shield to allow access to the round hole on the passenger side, and lower the exhaust by removing two exhaust isolators.
1. Lower exhaust by removing two exhaust isolators and remove the rubber plug from the driver side hole. 2. Trim heat shield to access the passenger side round hole. 3. Enlarge holes on both sides to fit the CM-SP17 spacer. 4. Reverse fishwire 1/2" x 1 1/2" carriage bolts and CM-SP17 spacers into the enlarged holes, and install the 1/2" x 1 3/4" carriage bolt and CM-SP4 spacer through the top of the vehicle tow loop. 5. Raise hitch into position and secure with 1/2" hex flange nuts. 6. Torque all 1/2" hardware to 110 lb-ft. 7. Raise exhaust back and reattach the rubber isolators.
All 1/2" hardware must be torqued to 110 lb-ft.
The parts list includes: two CM-SP17 spacers (.250 x 1.25 x 2.50" square hole), two 1/2" fishwire, one 1/2"-13 UNC 1-3/4" carriage bolt (part 10-10272), one CM-SP4 spacer (.250 x 1.50 x 3.00" square hole), three 1/2"-13 UNC serrated flange nuts (part 20-00062), and two 1/2"-13 UNC 1-1/2" carriage bolts (part 10-10287).
All non-trailer loads (wheel-less loads) applied to this hitch must be supported by Curt stabilizing straps part number 18050. Failure to properly support non-trailer loads will void the product warranty.
Do not exceed your vehicle manufacturer's recommended towing capacity. The hitch itself is rated for 2,000 lbs trailer weight and 200 lbs tongue weight, but your vehicle's capacity may be lower.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This should be done regularly to maintain the integrity of the installation.
Curt Manufacturing warrants the product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If defective, Curt may repair or replace the product at their option when returned prepaid with proof of purchase. The warranty is voided by alteration, misuse, or improper installation. Curt's liability is limited to repair or replacement of defective products and excludes liability for incidental or consequential loss or damage.
Yes, the Curt 11256 is designed for Nissan Versa Sedan models from 2012 to current.
The hitch is rated for 2,000 lbs trailer weight and 200 lbs tongue weight, but you must not exceed your vehicle manufacturer's recommended towing capacity.
Yes. You must enlarge existing holes on both sides of the vehicle, trim the heat shield, and lower the exhaust by removing two isolators.
You will need a ratchet, torque wrench, 3/4" socket, 10" socket extension, aviation shears, die grinder, and safety glasses.
All 1/2" hardware must be torqued to 110 lb-ft.
Safety glasses must be worn at all times while installing this product.
On Sale Today
Original price was $434.85. Current price is $327.08.You save $107.77 (25%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Tue, Aug 11 - Fri, Aug 14
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.