Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Always the correct part
We know our products
Always the correct part
We know our products
Quality Products
Free Shipping!
Quality Products
Free Shipping!
This fits: 2013-2022 Nissan Sentra Excluding SR, SR Turbo and Nismo
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Nissan Sentra (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 Nissan Sentra Excluding SR, SR Turbo and Nismo Class 1 Trailer Hitch, 1-1/4" Receiver, Select Nissan Sentra
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2013 - 2022 | Nissan Sentra | Excluding SR, SR Turbo and Nismo |
The 2013-2022 Nissan Sentra Excluding SR, SR Turbo and Nismo Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11349-001) fits 2013-2022 Nissan Sentra models. The 2022 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 2013-2022 Nissan Sentra Excluding SR, SR Turbo and Nismo Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11349-001) is designed to fit the 2013-2022 Nissan Sentra.
The 2013-2022 Nissan Sentra Excluding SR, SR Turbo and Nismo Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11349-001) fits the following vehicles: 2013-2022 Nissan Sentra. Always verify your specific year, make, and model before ordering.
The 2013-2022 Nissan Sentra Excluding SR, SR Turbo and Nismo Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11349-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, CURT part number 11349 is designed for the 2013 Nissan Sentra Sedan. However, it does not fit the SR version of this model year.
CURT hitch 11349 is designed for use with ballmount #45521/D-21, or Euro ballmounts #45571 (1 7/8" ball) or #45572 (2" ball).
The maximum trailer weight is 2,000 lbs and the maximum tongue weight is 200 lbs. However, you must never exceed your vehicle manufacturer's recommended towing capacity.
The hitch has a gross load capacity of 2,000 lbs trailer weight and 200 lbs tongue weight when used as a weight-carrying hitch. You must not exceed your vehicle manufacturer's recommended towing capacity.
Yes, but all non-trailer loads applied to this hitch must be supported by CURT 18050 stabilizing straps. Failure to use proper support will void the product warranty.
Required tools are: flat head screwdriver, die grinder, ratchet, 6" socket extension, 9/16" socket, 9/16" and 3/4" boxed end wrenches, and a torque wrench. Safety glasses must be worn at all times during installation.
Two people may be required to ease installation. The manual notes that using proper tools will greatly improve the quality of the install and reduce the time required.
Yes. You must use a die grinder to enlarge the rear hole in the driver side frame rail. This enlarged hole is used as the access hole for fishwiring the mounting hardware. The manual does not specify whether this modification is permanent or reversible.
1. Locate and pry out two plastic fascia clips at the rear of the vehicle; retain them for reinstallation. 2. Use a die grinder to enlarge the rear hole in the driver side frame rail. 3. Fishwire forward 1/2" mounting hardware through the frame access hole. 4. Reverse fishwire rearward 1/2" mounting hardware into the frame access hole. 5. Raise the hitch into position, attaching to the fishwired hardware on the driver side; 3/8" hardware pushes through the rear frame on the passenger side. 6. Using 1/2" carriage bolt, nut and spacer, attach the rear hitch plate to the vehicle tow loop. 7. Reattach the two plastic fascia clips. 8. Torque all fasteners.
Torque all 1/2" hardware to 110 ft-lbs. Torque all 3/8" hardware to 45 ft-lbs.
The kit includes: 2 square hole spacers (CM-SP6, 0.250 x 1.00 x 3.00"), 2 hex bolts (3/8-16 x 1 1/4"), 2 washers (3/8"), 2 hex flange nuts (HFN3816P, 3/8-16), 2 carriage bolts (1/2-13 x 1 1/2"), 3 hex flange nuts (HFN 1213, 1/2-13), 1 carriage bolt (1/2-13 x 2"), 1 square hole spacer (CM-SP4, 0.250 x 1.50 x 3.00"), and 2 pieces of 1/2" fishwire.
Fishwiring is used to route the 1/2" mounting hardware through the frame access hole on the driver side. The hardware is fishwired forward through the hole, then reverse fishwired rearward to position it for hitch attachment. This allows the hardware to be secured without direct access to the frame interior.
The rear hitch plate is attached to the vehicle tow loop using one 1/2" carriage bolt, a hex flange nut, and a square hole spacer (CM-SP4, 0.250 x 1.50 x 3.00"). This bolt must be torqued to 110 ft-lbs.
The driver side is attached using fishwired 1/2" mounting hardware. Two carriage bolts (1/2-13 x 1 1/2") with hex flange nuts and square hole spacers (CM-SP6) are fishwired forward through the enlarged access hole in the driver side frame rail, then reverse fishwired rearward to secure the hitch.
The passenger side is attached using 3/8" hardware. Two hex bolts (3/8-16 x 1 1/4") with washers and hex flange nuts (HFN3816P) push through the rear of the vehicle frame on the passenger side. They are secured with a 9/16" socket and held tightly on the back side with a boxed end wrench. These bolts must be torqued to 45 ft-lbs.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This ongoing inspection is critical to safe operation.
CURT Manufacturing LLC warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT may repair or replace it at their option when returned prepaid with proof of purchase. Alteration, misuse, or improper installation voids the warranty. CURT's liability is limited to repair or replacement of defective products and excludes liability for incidental or consequential loss or damage.
Yes, CURT 11349 fits 2013 Nissan Sentra Sedan, but not the SR version.
Maximum 2,000 lbs trailer weight and 200 lbs tongue weight, but never exceed your vehicle manufacturer's recommended towing capacity.
Flat head screwdriver, die grinder, ratchet, 6" socket extension, 9/16" socket, 9/16" and 3/4" boxed end wrenches, torque wrench, and safety glasses.
Yes, you must use a die grinder to enlarge the rear hole in the driver side frame rail for the fishwire access hole.
Periodically check that all fasteners are tight and all structural components are sound.
On Sale Today
Original price was $410.85. Current price is $312.60.You save $98.25 (24%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Mon, Sep 14 - Thu, Sep 17
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.