Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2015-2025 Porsche Macan Excluding S
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Audi Q5 and Porsche Macan (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 750 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Uses pre-existing vehicle hardware for installation
2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025 Porsche Macan Excluding S Class 3 Trailer Hitch, 2" Receiver, Select Audi Q5, Porsche Macan
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2015 - 2025 | Porsche Macan | Excluding S |
Yes, the 2015-2025 Porsche Macan Excluding S CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13612-001) is designed to fit the 2015-2025 Porsche Macan.
The 2015-2025 Porsche Macan Excluding S CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13612-001) fits the following vehicles: 2015-2025 Porsche Macan. Always verify your specific year, make, and model before ordering.
The 2015-2025 Porsche Macan Excluding S CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13612-001) fits 2015-2025 Porsche Macan models. The 2025 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2015-2025 Porsche Macan Excluding S CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13612-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The CURT 13612 is designed for Audi Q5 models. However, the installation procedure varies depending on whether your Q5 has a bumper fascia hitch access panel. Models with the access panel have a simpler installation, while those without require trimming of the lower fascia panel. Verify your specific model year and configuration before purchasing, as the manual does not specify which model years are compatible.
The CURT 13612 is designed for Porsche Macan models. Installation procedures vary by model variant: Macan S and Turbo models require trimming of the lower fascia panel to specific dimensions (4-1/4" and 6-1/2" as shown in Step 11), while GTS models require trimming 'as necessary.' The manual does not specify which model years are compatible.
The CURT 13612 has a gross trailer weight (GTW) capacity of 5,000 lbs. and a tongue weight (TW) capacity of 750 lbs. Never exceed your vehicle manufacturer's recommended towing capacity, as that is the limiting factor for your specific vehicle.
Required tools are: 10mm socket (deep well), 17mm socket, T-25 Torx bit socket, T-30 Torx bit socket, socket extension (6"), ratchet, torque wrench, panel trim removal tool, rotary tool, tape measure, and tape. A tools reference guide is available at curtmfg.com/trailer-hitch-installation.
Yes. The installation requires temporary removal of the rear fascia and trunk panel. The bumper fascia must be completely removed to access the frame rails and install the hitch. The fascia is reinstalled in the final step after the hitch is secured.
Yes. Step 1 requires removal of the trunk floor panel and storage tray if equipped. This provides access to the scuff plate and other components that must be removed to reach the fascia fasteners.
Yes, on Audi Q5 models only. Step 4 requires unstrapping and removing the air compressor, then removing the styrofoam air compressor bracket using two retainers. This step is skipped for Porsche Macan models.
Yes, on Audi Q5 models only. Step 5 requires removing one M6 nut holding the fuse box in place using a 10mm socket, then lifting the fuse box out of the way. The electrical connectors remain in place; do not disconnect them. The fuse box is set aside during installation and reinstalled later.
Yes, on Audi Q5 models only. Step 5 requires disconnecting the power outlet electrical connector on the backside of the passenger-side interior panel before removing that panel.
Yes. Step 6 requires removing four T-25 torx screws per side from both the driver- and passenger-side wheel well liners to access the fascia fasteners. For Porsche models, gently pull the wheel well liner towards the wheel to access the fascia fasteners.
Yes. Step 8 requires carefully disconnecting all electrical connectors from the bumper fascia before setting it aside. For Porsche Macan models, also disconnect the washer hose from the fascia.
To remove debris from weldnuts in the frame, spray lubricant or compressed air into the hole. For heavy debris, use a wire brush. Take care not to damage the threads. This cleaning should be done before sliding the hitch into the frame rails.
Step 10: Slide the hitch into the frame rails, aligning the hitch mounting slots with the retaining bracket holes on each side. Place the retaining brackets back in position and reinstall the two M10 bolts per side. Torque the M10 bolts to 44 ft-lbs.
Trimming is required for some models. Audi Q5 models without a bumper fascia hitch access panel require trimming of the lower fascia panel. Porsche Macan S and Turbo models require trimming to specific dimensions: 4-1/4" and 6-1/2" as shown in Step 11. Porsche Macan GTS models require trimming 'as necessary.' Audi Q5 models with a hitch access panel do not require trimming; instead, remove the access panel using two T-25 torx screws.
A rotary tool is required to trim the fascia panel. The manual lists a rotary tool in the Tools Required section.
Torque the M10 bolts to 44 ft-lbs. These bolts secure the retaining brackets and hitch to the frame rails.
Torque M6 fasteners to 7 ft-lbs. This applies to fasteners used during reassembly of the bumper fascia and other components.
Torque T-30 fasteners to 3 ft-lbs. This applies to fasteners used during reassembly of the bumper fascia and other components.
Torque T-25 fasteners to 1.1 ft-lbs. This applies to fasteners used during reassembly of the bumper fascia and other components.
Safety glasses must be worn at all times while installing this product. Additionally, never exceed your vehicle manufacturer's recommended towing capacity when using the hitch.
Periodic inspection of the trailer hitch should be performed to ensure all mounting hardware remains tight and structural components are secure. The manual does not specify the inspection interval or detailed inspection procedures.
Yes. The installation difficulty level is rated as 'Difficult' based on the time and effort involved. The actual difficulty may vary depending on installer expertise, vehicle condition, and availability of proper tools and equipment. The installation requires removal of multiple interior and exterior components, including the bumper fascia, trunk panel, and on Audi models, the air compressor and fuse box.
The CURT 13612 is designed for Audi Q5 and Porsche Macan models. Installation procedures vary by model variant and whether your vehicle has a bumper fascia hitch access panel.
Gross trailer weight capacity is 5,000 lbs.; tongue weight capacity is 750 lbs. Never exceed your vehicle manufacturer's recommended towing capacity.
Required tools include 10mm and 17mm sockets, T-25 and T-30 Torx bit sockets, 6" socket extension, ratchet, torque wrench, panel trim removal tool, rotary tool, tape measure, and tape.
Trimming is required for Audi Q5 models without a hitch access panel and Porsche Macan S, Turbo, and GTS models. Audi Q5 models with an access panel require removal of the access panel instead of trimming.
M10 bolts: 44 ft-lbs; M6 fasteners: 7 ft-lbs; T-30 fasteners: 3 ft-lbs; T-25 fasteners: 1.1 ft-lbs.
Wear safety glasses at all times during installation. Never exceed your vehicle manufacturer's recommended towing capacity. Perform periodic inspections to ensure all mounting hardware remains tight.
On Sale Today
Original price was $436.85. Current price is $325.71.You save $111.14 (25%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Thu, Sep 10 - Sun, Sep 13
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.