Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2016-2021 Hyundai Tucson Excluding Night
A CURT trailer hitch is the key to pursuing your passions, whether you're taking the family boat out for an afternoon on the water or packing up the mountain bikes for a day on the trails. This CURT class 2 hitch is perfect for towing a small trailer, such as a boat trailer, lightweight camper or utility trailer. It can also be used to mount a hitch cargo carrier or bike rack (never exceed the lowest-rated towing component). Like all CURT custom hitches, this class 2 trailer hitch is made for a vehicle-specific fit. It is engineered to seamlessly integrate with select years of the Hyundai Tucson (see application info to verify fitment). It is rated for 3,500 pounds gross trailer weight and 350 pounds tongue weight. It is also equipped with 1-1/4" x 1-1/4" hitch receiver to accept the included ball mount. The ball mount that comes with this hitch kit has a 3/4" trailer ball hole and can be positioned in the drop or rise orientation for level towing with your specific trailer (trailer ball not included). Like all CURT custom receiver hitches, this class 2 hitch is designed, manufactured, finished and tested with the utmost care. It is engineered for a precise fit, easy installation, maximum towing strength and an integrated look on the vehicle. It is also tested to SAE J684 protocols for safety. This class 2 trailer hitch is finished with our industry-leading dual-coat process for unparalleled rust, chip and UV resistance. It is descaled for a smooth surface, submersed in liquid A-coat for rust prevention inside and out, covered with a highly durable powder coat, and finally co-cured for a dependable shield against the elements. This class 2 hitch comes with a ball mount, hitch pin and mounting hardware for a complete installation.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes ball mount #45521, installation hardware, pin & clip
2016, 2017, 2018, 2019, 2020, 2021 Hyundai Tucson Excluding Night Class 2 Trailer Hitch, 1-1/4" Ball Mount, Select Hyundai Tucson
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2016 - 2021 | Hyundai Tucson | Excluding Night |
The 2016-2021 Hyundai Tucson Excluding Night Class 2 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-122413-001) fits the following vehicles: 2016-2021 Hyundai Tucson. Always verify your specific year, make, and model before ordering.
Yes, the 2016-2021 Hyundai Tucson Excluding Night Class 2 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-122413-001) is designed to fit the 2016-2021 Hyundai Tucson.
The 2016-2021 Hyundai Tucson Excluding Night Class 2 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-122413-001) fits 2016-2021 Hyundai Tucson models. The 2021 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2016-2021 Hyundai Tucson Excluding Night Class 2 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-122413-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, CURT part number 122413 is designed for the Hyundai Tucson. The manual does not specify model year restrictions, so contact CURT technical support at 1-800-798-0813 to confirm your specific year and trim level are compatible.
The manual lists a gross load capacity of 3,500 lbs. trailer weight and 350 lbs. tongue weight when used as a weight-carrying hitch. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower. Check your Hyundai owner's manual for the maximum towing capacity your specific vehicle supports.
The hitch weight is 40 lbs.
Non-trailer loads can be applied to this hitch, but they must be supported by CURT stabilizing straps part number 18050. Failure to properly support non-trailer loads will void the product warranty.
You will need: a ratchet, extension, 17mm socket, torque wrench, short #2 Phillips screwdriver, and safety glasses.
The kit includes 8 M10-1.25 x 30 hex bolts and 8 3/8" conical toothed washers. These fasteners are used to attach the hitch to the existing weld nuts on the frame rails.
If equipped, you must remove two plastic panels located under the bumper behind the rear tires. Using a screwdriver, remove three plastic clips from each panel and pull down to dislodge. Set the panels and fasteners aside for reinstallation after the hitch is installed.
No, drilling is not required. The hitch attaches to existing weld nuts on the frame rails.
Start by inserting the hitch over the exhaust on the passenger side. Rotate the hitch and raise it into position. You may need to pull down on the exhaust to ease the installation process.
Install four M10-1.25 x 30 bolts with four 3/8" conical toothed washers per side (8 bolts total). Ensure the tooth portion of the washer is against the hitch.
Torque all M10 fasteners to 40 ft-lbs.
The tooth portion of the conical toothed washer must be against the hitch. This ensures proper clamping and load distribution.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This maintenance is important for safe operation and to maintain warranty coverage.
The CURT 122413 is designed for use with ball mount part number 45521. Euro mount options are available: part number 45571 (1 7/8" ball) and part number 45572 (2" ball).
CURT Manufacturing warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If defective, CURT may repair or replace the product at their option when returned prepaid with proof of purchase. Warranty is voided by alteration, misuse, or improper installation. CURT's liability is limited to repair or replacement and excludes incidental or consequential loss or damage.
Yes, the CURT 122413 is designed for the Hyundai Tucson. Confirm your specific model year with CURT technical support at 1-800-798-0813.
No drilling is required. The hitch attaches to existing weld nuts on the frame rails.
You need a ratchet, extension, 17mm socket, torque wrench, short #2 Phillips screwdriver, and safety glasses.
Torque all M10 fasteners to 40 ft-lbs.
The hitch supports 3,500 lbs. trailer weight and 350 lbs. tongue weight, but you must not exceed your vehicle manufacturer's recommended towing capacity.
Yes, but non-trailer loads must be supported by CURT stabilizing straps part number 18050, or warranty will be voided.
On Sale Today
Original price was $399.85. Current price is $299.92.You save $99.93 (25%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Sep 6 - Wed, Sep 9
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.