Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2016-2021 Hyundai Tucson Excluding Night
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Hyundai Tucson (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 525 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2016, 2017, 2018, 2019, 2020, 2021 Hyundai Tucson Excluding Night Class 3 Trailer Hitch, 2" Receiver, Select Hyundai Tucson
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2016 - 2021 | Hyundai Tucson | Excluding Night |
Yes, the 2016-2021 Hyundai Tucson Excluding Night CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13240-001) is designed to fit the 2016-2021 Hyundai Tucson.
The 2016-2021 Hyundai Tucson Excluding Night CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13240-001) fits the following vehicles: 2016-2021 Hyundai Tucson. Always verify your specific year, make, and model before ordering.
The 2016-2021 Hyundai Tucson Excluding Night CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13240-001) fits 2016-2021 Hyundai Tucson models. The 2021 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2016-2021 Hyundai Tucson Excluding Night CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13240-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The manual confirms CURT 13240 is designed for Hyundai Tucson. However, the manual does not specify which model years, generations, trim levels, or drivetrain configurations are compatible. Contact CURT technical support at 1-877-287-8634 or consult a fitment database to confirm compatibility with your specific Tucson.
The manual specifies a gross load capacity of 3,500 lbs. trailer weight and 525 lbs. tongue weight when used as a weight-carrying hitch. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower. Check your Hyundai Tucson owner's manual for the vehicle's maximum towing capacity.
Non-trailer loads can be applied to this hitch only if they are supported by CURT 18050 stabilizing straps. Failure to properly support non-trailer loads with these straps will void the product warranty.
You will need: ratchet, extension, 17mm socket, torque wrench, and short #2 Phillips screwdriver.
The hitch includes 8 M10×1.25×30 hex head cap screws (HHCS) grade 10.9 with zinc plating, and 8 conical tooth washers (3/8" S-CON, zinc plated). These fasteners attach the hitch to the frame rails.
If equipped, yes. Two plastic panels are located under the bumper behind the rear tires. Remove three plastic clips from each panel using a screwdriver and pull down to dislodge. Set the panels and fasteners aside for reinstallation after hitch installation.
No. The manual explicitly states no drilling is required for this installation.
Insert the hitch over the exhaust on the passenger side. Rotate the hitch and raise it into position. Pulling down on the exhaust will ease the installation process.
Four M10×1.25×30 fasteners with four 3/8" conical tooth washers attach to each side (passenger and driver side frame rails), for a total of 8 fasteners.
The tooth portion of the conical washer must be against the hitch. This ensures proper load distribution and fastener security.
All M10 fasteners must be torqued to 40 ft-lbs.
Yes. The manual notes that weld nut cleaning may be required. Inspect the existing weld nuts on the frame rails before installation and clean them if necessary to ensure proper fastener engagement.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This helps maintain safe operation and preserve the warranty.
CURT Manufacturing warrants this product to be free of defects in material and workmanship at the time of retail purchase by the original purchaser. If defective, CURT may repair or replace it at their option when returned prepaid with proof of purchase. Warranty is voided by alteration, misuse, or improper installation. CURT's liability is limited to repair or replacement and excludes incidental or consequential loss or damage.
CURT 13240 is designed for Hyundai Tucson. Confirm your specific model year and configuration with CURT technical support at 1-877-287-8634.
All M10 fasteners must be torqued to 40 ft-lbs.
If equipped, yes. Two plastic panels under the bumper behind the rear tires must be removed and reinstalled after hitch installation.
On Sale Today
Original price was $395.85. Current price is $298.71.You save $97.14 (25%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Sep 6 - Wed, Sep 9
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.