Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2021-2024 Ford Bronco Excluding factory receiver
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Ford Bronco (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 4,000 lbs. WD and 400 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2021, 2022, 2023, 2024 Ford Bronco Excluding factory receiver Class 3 Trailer Hitch, 2" Receiver, Select Ford Bronco
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2021 - 2024 | Ford Bronco | Excluding factory receiver |
Yes, the 2021-2024 Ford Bronco Excluding factory receiver CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13493-001) is designed to fit the 2021-2024 Ford Bronco.
The 2021-2024 Ford Bronco Excluding factory receiver CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13493-001) fits 2021-2024 Ford Bronco models. The 2024 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2021-2024 Ford Bronco Excluding factory receiver CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13493-001) fits the following vehicles: 2021-2024 Ford Bronco. Always verify your specific year, make, and model before ordering.
The 2021-2024 Ford Bronco Excluding factory receiver CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13493-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The gross trailer weight (GTW) capacity is 3,500 lbs with a tongue weight (TW) of 350 lbs. If using weight distribution, the capacity increases to 4,000 lbs GTW with 400 lbs tongue weight (WDTW).
Only if your vehicle has a metal bracket on the bottom of the bumper beam. If your vehicle does not have this bracket, bumper removal is not necessary. If removal is required, you will disconnect the electrical connector, remove bolts from the frame rails and bumper, and carefully open the rear gate to remove the bumper for reinstallation after hitch installation.
You will need a ratchet, 3/4" wrench, 3/4" socket, torque wrench, 18mm socket, and 13mm socket. A full tools reference guide is available at curtmfg.com/trailer-hitch-installation.
The manual does not specify battery disconnection. However, you must disconnect the electrical connector behind the bumper near the wheel well on each side of the vehicle before beginning installation.
The hitch includes four 1/2"-13 x 4-1/2" hex bolts, four 1/2" flat washers, and four 1/2" serrated-flange nuts. These are used to secure the hitch to the bumper beam.
All 1/2" hardware must be torqued to 110 ft-lbs. Use a torque wrench to ensure proper tightening during installation.
Loosely secure the four 1/2" hex bolts with serrated-flange nuts during initial positioning (Step 5). Once the hitch is properly positioned around the bumper beam, torque all 1/2" hardware to 110 ft-lbs.
If the bumper was removed, reinstall it by reversing steps 1–4 in reverse order. The electrical cap will mount into the slot on the hitch. Reconnect the electrical connector behind the bumper near the wheel well on each side.
Wear safety glasses at all times during installation. Never exceed your vehicle manufacturer's recommended towing capacity. After installation, perform periodic inspections to ensure all mounting hardware remains tight and structural components are secure.
Periodic inspection of the trailer hitch should be performed to ensure all mounting hardware remains tight and structural components are secure. The manual does not specify a particular inspection interval.
The manual does not specify vehicle year, make, or model compatibility. Contact CURT product support at 877.287.8634 or visit curtmfg.com to confirm fitment for your specific vehicle.
The parts list does not mention a ball mount. Contact CURT product support at 877.287.8634 to confirm whether a ball mount is included or must be purchased separately.
Only if your vehicle has a metal bracket on the bottom of the bumper beam. If not, bumper removal is not necessary.
Torque all 1/2" hardware to 110 ft-lbs using a torque wrench.
Gross trailer weight capacity is 3,500 lbs (350 lbs tongue weight), or 4,000 lbs with weight distribution (400 lbs tongue weight). Never exceed your vehicle manufacturer's recommended towing capacity.
Wear safety glasses at all times during installation.
On Sale Today
Original price was $233.85. Current price is $188.71.You save $45.14 (19%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Tue, Sep 22 - Fri, Sep 25
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.