Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
On Sale Today
Original price was $429.85. Current price is $320.71.You save $109.14 (25%)
Free Shipping
Ships free on all orders
Authorized Dealer
This fits: 2007-2021 Toyota Tundra Excluding factory receiver
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Tundra (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 8,000 lbs. WD and 800 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 Toyota Tundra Excluding factory receiver Class 3 Trailer Hitch, 2" Receiver, Select Toyota Tundra
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2007 - 2021 | Toyota Tundra | Excluding factory receiver |
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Aug 30 - Wed, Sep 2
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
The 2007-2021 Toyota Tundra Excluding factory receiver CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13198-001) fits the following vehicles: 2007-2021 Toyota Tundra. Always verify your specific year, make, and model before ordering.
Yes, the 2007-2021 Toyota Tundra Excluding factory receiver CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13198-001) is designed to fit the 2007-2021 Toyota Tundra.
The 2007-2021 Toyota Tundra Excluding factory receiver CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13198-001) fits 2007-2021 Toyota Tundra models. The 2021 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2007-2021 Toyota Tundra Excluding factory receiver CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13198-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The Curt 13198 is a receiver hitch designed for the Toyota Tundra. It is a weight-carrying hitch that can be used as either a weight-carrying hitch or a weight distribution hitch, depending on your towing needs.
Yes, the Curt 13198 is designed specifically for the Toyota Tundra.
The manual specifies the Curt 13198 is designed for the Toyota Tundra. Fitment on other Toyota models is not addressed in this manual. Contact Curt Manufacturing or consult a fitment database to confirm compatibility with other vehicles.
No, drilling is not required. The hitch uses existing weld nuts on the frame rails.
You must remove existing angle brackets from the inside surface of the frame rails and bumper brackets. Return these brackets and their fasteners to the vehicle owner.
The kit includes: 2 square hole spacers (CM-SP12), 4 S-CON washers (1/2"), 2 serrated flange nuts (1/2"-13 UNC), 4 M12×1.25 hex cap screws, 4 M14×2 hex cap screws, 4 lock washers (5/8"), 2 hex cap screws (1/2"-13 UNC, 1-3/4"), and 4 flat washers (5/8"), plus 4 M14×2 hex nuts.
According to Curt Manufacturing, DIY installation takes approximately 65 minutes. Professional installation time is not specified in the manual.
Follow these steps in order: (1) Remove existing angle brackets from the inside surface of frame rails and bumper brackets, and return them to the vehicle owner. (2) Raise the hitch into position and install the 12mm bolts with conical tooth washers. (3) Install the 14mm fasteners, then the 1/2" fasteners as shown in the diagram. (4) Torque all fasteners to specification.
Torque all 1/2" fasteners to 110 lb-ft, all 12mm fasteners to 86 lb-ft, and all 14mm fasteners to 126 lb-ft.
All 1/2" fasteners must be torqued to 110 lb-ft.
All 12mm fasteners must be torqued to 86 lb-ft.
All 14mm fasteners must be torqued to 126 lb-ft.
Do not exceed your vehicle manufacturer's recommended towing capacity. The Curt 13198 is rated for specific trailer weight and tongue weight limits (which are not fully specified in this manual), but your vehicle's manufacturer limits take precedence. Consult your Toyota Tundra owner's manual and the Curt 13198 specification sheet to determine the correct limits for your specific truck.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. The manual does not specify a maintenance interval, so consult Curt Manufacturing or your vehicle's service manual for recommended inspection frequency.
Periodically check all fasteners to ensure they remain tight and all structural components are sound. The manual does not specify an exact interval; consult Curt Manufacturing for recommended inspection frequency.
Curt Manufacturing warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, Curt Manufacturing may repair or replace the product at their option when the product is returned, prepaid, with proof of purchase. Alteration to, misuse, or improper installation voids the warranty. Curt Manufacturing's liability is limited to repair or replacement of defective products and excludes liability for incidental or consequential loss or damage.
Yes. The installation diagram shows existing weld nuts on both the driver side and passenger side frame rails. These are used to secure the hitch fasteners; no drilling is required.
The installation requires removal of existing angle brackets from the bumper brackets. The hitch is designed to work with the Tundra's bumper assembly, but consult the installation diagram or contact Curt Manufacturing if you have concerns about clearance or fitment with aftermarket bumpers or accessories.
No reviews have been added for this product.