Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2016-2023 Toyota Tacoma Excluding factory receiver
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Tacoma (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 900 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 8,000 lbs. WD and 900 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 Toyota Tacoma Excluding factory receiver Class 3 Trailer Hitch, 2" Receiver, Select Toyota Tacoma
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2016 - 2023 | Toyota Tacoma | Excluding factory receiver |
The 2016-2023 Toyota Tacoma Excluding factory receiver CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13264-001) fits 2016-2023 Toyota Tacoma models. The 2023 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2016-2023 Toyota Tacoma Excluding factory receiver CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13264-001) fits the following vehicles: 2016-2023 Toyota Tacoma. Always verify your specific year, make, and model before ordering.
Yes, the 2016-2023 Toyota Tacoma Excluding factory receiver CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13264-001) is designed to fit the 2016-2023 Toyota Tacoma.
The 2016-2023 Toyota Tacoma Excluding factory receiver CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13264-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, CURT part number 13264 is designed for Toyota Tacoma models from 2016 to present. The hitch is a weight-carrying receiver hitch that mounts to the frame rails without drilling.
The CURT 13264 has two capacity ratings depending on how it is used. As a weight-carrying hitch: 6000 lbs trailer weight and 900 lbs tongue weight. As a weight-distribution hitch: 8000 lbs trailer weight and 900 lbs tongue weight. You must never exceed your vehicle manufacturer's recommended towing capacity, whichever is lower.
The hitch weight is 40 lbs.
You will need: a ratchet, a torque wrench, a 19mm socket, a 3/4" socket, and a 10" socket extension. Safety glasses should be worn at all times during installation.
No. The CURT 13264 requires no drilling. It uses existing vehicle weldnuts in the frame rails and existing holes in the bumper beam.
Two people may be required to ease installation. If you are hesitant to undertake this task on your own, CURT recommends contacting an authorized CURT installer for additional assistance.
Before you begin installation, read all instructions thoroughly. Clean the weldnuts on the frame rails to ensure proper fastener seating. Using proper tools will greatly improve the quality of the install and reduce the time required.
The kit includes: (2) 1/2" x 30" fishwire, (4) M12x1.25 hex cap screws (part 10-10277), (4) 1/2" conical toothed washers (part 30-00149), (2) 1/2"-13 hex flange nuts (part 20-00062), (2) 1/2"-13 carriage bolts 1-3/4" long (part 10-10272), and (2) 0.250" x 1.25" x 3.00" square hole spacers (part CM-SP19).
1. Fishwire the two 1/2" carriage bolts and two CM-SP19 spacers through the ends of the bumper beam and out the mounting holes. Push the spacer up, pull the bolt partially through the spacer, then rotate the bolt and spacer through the mounting hole. 2. Raise the hitch into position between the bumper mount plates and align the slots in the hitch with the existing vehicle weldnuts in the frame rails. 3. Install the four M12-1.25 hex bolts and four 1/2" conical toothed washers into the existing weldnuts. 4. Install the two 1/2"-13 hex flange nuts onto the carriage bolts. 5. Torque the M12 fasteners to 86 lb-ft and the 1/2" fasteners to 110 lb-ft.
The M12-1.25 hex bolts must be torqued to 86 lb-ft.
The 1/2"-13 carriage bolts and hex flange nuts must be torqued to 110 lb-ft.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This should be done regularly to maintain safe operation.
The manual specifies a minimum clearance of 20 inches for weight carrying and 40 inches for weight distribution. These measurements appear to relate to hitch positioning but the manual does not explicitly define what these clearances measure.
Safety glasses should be worn at all times while installing this product. Never exceed your vehicle manufacturer's recommended towing capacity. Do not exceed the hitch's gross load capacity ratings.
Yes. The CURT 13264 complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.
CURT Manufacturing warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT may repair or replace the product at their option when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this product voids the warranty. CURT's liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.
Installation time depends on experience level. Professional installation takes approximately 34 minutes. Novice (DIY) installation takes approximately 40 minutes.
For installation questions, call CURT Technical Support at 1-877-287-8634. For more information, log onto www.curtmfg.com. For helpful towing tips, log onto www.hitchinfo.com. If you are hesitant to undertake installation on your own, contact an authorized CURT installer for additional assistance.
Yes, the CURT 13264 is designed for Toyota Tacoma models 2016 to present.
Weight carrying: 6000 lbs trailer / 900 lbs tongue. Weight distribution: 8000 lbs trailer / 900 lbs tongue. Never exceed your vehicle manufacturer's recommended towing capacity.
No, no drilling is required. The hitch uses existing vehicle weldnuts and existing bumper beam holes.
Ratchet, torque wrench, 19mm socket, 3/4" socket, 10" socket extension, and safety glasses.
M12 fasteners: 86 lb-ft. 1/2" fasteners: 110 lb-ft.
Two people may be required to ease installation. Professional help is available if needed.
Wear safety glasses during installation. Never exceed vehicle manufacturer's towing capacity or the hitch's gross load capacity ratings. Periodically check all fasteners are tight.
On Sale Today
Original price was $279.95. Current price is $231.29.You save $48.66 (17%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Sep 6 - Wed, Sep 9
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.