Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Always the correct part
We know our products
Always the correct part
We know our products
Quality Products
Free Shipping!
Quality Products
Free Shipping!
This fits: 2017-2020 Chevrolet Sonic Hatchback
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Chevrolet Sonic (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes ball mount #45521, installation hardware, pin & clip (trailer ball sold separately)
2017, 2018, 2019, 2020 Chevrolet Sonic Hatchback Class 1 Trailer Hitch, 1-1/4" Ball Mount, Select Chevrolet Sonic
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2017 - 2020 | Chevrolet Sonic | Hatchback |
The 2017-2020 Chevrolet Sonic Hatchback Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-114643-001) fits 2017-2020 Chevrolet Sonic models. The 2020 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 2017-2020 Chevrolet Sonic Hatchback Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-114643-001) is designed to fit the 2017-2020 Chevrolet Sonic.
The 2017-2020 Chevrolet Sonic Hatchback Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-114643-001) fits the following vehicles: 2017-2020 Chevrolet Sonic. Always verify your specific year, make, and model before ordering.
The 2017-2020 Chevrolet Sonic Hatchback Class 1 Trailer Hitch, 1-1/4" Ball Mount (Part #CHD-114643-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, CURT hitch 11464 is designed for 2017-Present Chevrolet Sonic Hatchback models.
The manual specifies this hitch is designed for 2017-Present Chevrolet Sonic Hatchback only. Fitment for other models or years is not addressed in the manual. Contact CURT technical support at 800.798.0813 or visit www.curtmfg.com to confirm compatibility with other vehicles.
CURT hitch 11464 has a gross load capacity of 2,000 lbs trailer weight and 200 lbs tongue weight when used as a weight carrying hitch. However, you must never exceed your vehicle manufacturer's recommended towing capacity.
Yes, but all non-trailer loads applied to this hitch must be supported by CURT 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty.
You will need: a ratchet, a torque wrench, a 6" socket extension, and an 11/16" socket. Safety glasses should be worn at all times during installation.
The hitch includes: (4) 7/16-14 x 1 1/4" carriage bolts, (4) .250 x .88 x 2.25" square hole spacers (CM-SP2), (4) 7/16-14 hex flange nuts, and (4) 7/16" fishwires. Fishwire hardware and reverse fishwire hardware are required for installation.
No. The manual states "NO DRILLING REQUIRED" for this installation.
The manual states that 2 people may be required to ease installation, though it does not specify whether a second person is mandatory. If you are hesitant to undertake the task on your own, CURT recommends contacting an authorized CURT installer for additional assistance.
1. Fishwire (2) 7/16" carriage bolts and (2) CM-SP2 spacers through the access holes and into the attachment holes in each frame rail. Note: the driver side frame rail requires a reverse fishwire for the rearmost attachment location. 2. Raise the hitch into position, feeding fishwires through holes in the hitch. Remove fishwires and secure the hitch with (4) 7/16" hex flange nuts. 3. Torque all hardware to 60 ft.-lbs.
The manual specifies that the driver side frame rail requires a reverse fishwire for the rearmost attachment location, but does not explain the reason. Refer to the Reverse Fishwire Diagram in the manual for guidance on how to use it.
All hardware must be torqued to 60 ft.-lbs.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This ongoing inspection is important for safe operation.
CURT hitch 11464 is designed for use with ball mount #45521. Euro mount options are available: #45571 (1 7/8" ball) and #45572 (2" ball).
Safety glasses should be worn at all times while installing this product. Before beginning installation, read all instructions thoroughly. Using proper tools will greatly improve the quality of the install and reduce the time required.
CURT 11464 is designed for 2017-Present Chevrolet Sonic Hatchback. For other vehicles, contact CURT at 800.798.0813 or www.curtmfg.com.
2,000 lbs trailer weight and 200 lbs tongue weight. Never exceed your vehicle manufacturer's recommended towing capacity.
No drilling required. Installation uses fishwire hardware to attach through existing access holes.
Ratchet, torque wrench, 6" socket extension, 11/16" socket, and safety glasses.
All fasteners must be torqued to 60 ft.-lbs.
Two people may be required to ease installation. If hesitant, contact an authorized CURT installer.
Yes, but all non-trailer loads must be supported by CURT 18050 stabilizing straps. Failure to do so voids the warranty.
On Sale Today
Original price was $399.85. Current price is $299.92.You save $99.93 (25%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Sep 6 - Wed, Sep 9
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.