Our in-house experts typically reply within one business day.
Raybestos
Verify Fitment
Select your vehicle to confirm this part fits.
2019 - 2023 Subaru Ascent
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
The Raybestos Voyager XP electric brake controller provides secure trailer braking when you need it most. As a tried-and-true proportional brake controller, the Voyager XP utilizes patented braking sensor technology and advanced electronics to provide a smooth braking response in any stopping situation. Its bi-colored LED brake indicator assures a complete connection between your vehicle and trailer, with the color changing gradually from green, which notes a completed circuit, to red to indicate relative braking power. This versatile controller has a compact design, a conveniently located power control knob to adjust settings, and a simple level knob for easy leveling during installation. Plus, the Voyager has a Plug & Play feature that allows for quick and easy connection with your vehicle?s wiring. The Raybestos Voyager XP trailer brake controller works with 1-4 axle trailers, comes with all the mounting hardware needed for installation.
| BRAND: | RAYBESTOS |
| PART NUMBER: | 761-9035 |
| WEIGHT: | 0.7 LBS |
| MATERIAL: | PLASTIC |
| BRAKE CONTROL TYPE: | PROPORTIONAL |
| TRAILER BRAKE WHEEL QUANTITY: | UP TO EIGHT WHEELS |
| LEVELING CAPABLE: | YES |
| BRAKE TYPE: | Electric |
| Diagnostic Capable: | YES |
| DISPLAY TYPE: | LED OUTPUT |
| HYDRAULIC CONNECTIONS: | NO |
| SOLID STATE CONSTRUCTION: | YES |
| CIRCUIT BREAKER PROTECTED: | YES |
| HOUSING COLOR: | BLACK |
| BRACKET INCLUDED: | YES |
Experts available to answer your questions
Call 888-634-94941 Year
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2019 - 2023 | Subaru Ascent | — |
The 2019-2023 Subaru Ascent Raybestos Voyager XP Proportional Brake Controller for Trailers with 1 to 4 Axles Black 761-9035 (Part #761-9035 70332) fits the following vehicles: 2019-2023 Subaru Ascent. Always verify your specific year, make, and model before ordering.
The 2019-2023 Subaru Ascent Raybestos Voyager XP Proportional Brake Controller for Trailers with 1 to 4 Axles Black 761-9035 (Part #761-9035 70332) fits 2019-2023 Subaru Ascent models. The 2023 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 2019-2023 Subaru Ascent Raybestos Voyager XP Proportional Brake Controller for Trailers with 1 to 4 Axles Black 761-9035 (Part #761-9035 70332) is designed to fit the 2019-2023 Subaru Ascent.
The 2019-2023 Subaru Ascent Raybestos Voyager XP Proportional Brake Controller for Trailers with 1 to 4 Axles Black 761-9035 (Part #761-9035 70332) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the 3062-037 electric trailer brake control wiring adapter is designed for the Subaru Ascent. The adapter connects to the vehicle's 4-pin electric brake control harness located underneath the dash, left of the steering column.
The 3062-037 is an electric trailer brake control wiring adapter for the Subaru Ascent. It connects your vehicle's factory electric brake control harness to an aftermarket electric brake control unit, allowing you to operate trailer brakes from your tow vehicle.
You will need a trim panel remover tool to complete the installation.
The manual requires that the vehicle be off with the keys removed from the ignition before beginning installation. The manual does not explicitly require battery disconnection, but you should always read and follow all warnings and instructions printed on the tow vehicle's battery.
The vehicle's electric brake control harness is located underneath the dash and to the left of the steering column. It is taped to another harness near the emergency brake pedal. It has a 4-pin connector that mates with the adapter connector.
First, plug the brake control adapter into the mating receptacle on the backside of the brake control unit itself. Then, plug the adapter into the vehicle's electric brake control harness connector (the 4-pin connector located under the dash, left of the steering column). Finally, follow all brake control manufacturer's installation instructions and mount the unit as directed.
The adapter is rated for a maximum of 3 axles with 6 brakes at 16 amps. Do not exceed the lower of your towing manufacturer's rating (including the rating in your vehicle owner's manual) or this 16-amp specification. Overloading the circuit can cause fires.
Always wear safety glasses during installation. Always read and follow all warnings and instructions included with the adapter and the brake control unit before beginning. Read your vehicle owner's manual and the brake control manufacturer's instructions for additional information. Do not exceed the amperage rating to prevent fire hazard.
The manual lists a trim panel remover as a required tool and mentions locating a routing path for the adapter to exit the bottom of the dash, which suggests trim panel removal may be necessary. However, the manual does not provide specific details about which panels to remove or the exact removal procedure. Follow the brake control manufacturer's installation instructions for complete guidance.
After plugging the adapter into the vehicle's electric brake control harness connector, locate a routing path for the adapter to exit the bottom of the dash. Then complete the installation per the electric brake control manufacturer's instructions and mount the unit as directed. Perform all test procedures as instructed by the brake control manufacturer.
The manual requires that you perform test procedures as instructed by the electric brake control manufacturer. The manual does not specify what those tests are, so refer to the brake control unit's installation instructions for the complete testing procedure.
Yes, the 3062-037 is designed for the Subaru Ascent. It connects to the vehicle's 4-pin electric brake control harness under the dash, left of the steering column.
A trim panel remover tool is required.
Yes, the vehicle must be off with the keys removed from the ignition before beginning installation.
The adapter is rated for a maximum of 3 axles with 6 brakes at 16 amps. Do not exceed the lower of your towing manufacturer's rating or this specification, as overloading can cause fires.
First plug the adapter into the mating receptacle on the backside of the brake control unit, then plug it into the vehicle's 4-pin electric brake control harness connector under the dash.
Always wear safety glasses during installation and follow all safety precautions.
Free Shipping
Ships free on all orders
Authorized Dealer
FREE ShippingFREE SHIPPING
Estimated delivery Wed, Sep 16 - Sat, Sep 19
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.