Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2020 - 2023 Porsche Cayenne
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2020-2023 Porsche Cayenne All
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Porsche Cayenne (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2020, 2021, 2022, 2023 Porsche Cayenne All Class 3 Trailer Hitch, 2" Receiver, Select Porsche Cayenne
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2020 - 2023 | Porsche Cayenne | — |
The 2020-2023 Porsche Cayenne All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13592-001) fits 2020-2023 Porsche Cayenne models. The 2023 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 2020-2023 Porsche Cayenne All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13592-001) is designed to fit the 2020-2023 Porsche Cayenne.
The 2020-2023 Porsche Cayenne All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13592-001) fits the following vehicles: 2020-2023 Porsche Cayenne. Always verify your specific year, make, and model before ordering.
The 2020-2023 Porsche Cayenne All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13592-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The gross trailer weight (GTW) capacity is 6,000 lbs, and the tongue weight (TW) capacity is 600 lbs. Never exceed your vehicle manufacturer's recommended towing capacity.
No, drilling is not required for this installation. The hitch uses existing M12 bolt holes where the original bumper beam was mounted.
Yes, bumper cover and beam removal is required. You will remove the original bumper beam and replace it with the hitch, then reinstall the bumper cover after trimming it to fit.
You will need: ratchet, Torx bits (T-25 and T-30), 18mm socket, 6" socket extension, tape measure, torque wrench, marker, aviation shears or knife, panel trim removal tool, and safety glasses. A full tools reference guide is available at curtmfg.com/trailer-hitch-installation.
The installation difficulty is rated as Moderate. This rating is based on time and effort involved and may vary depending on installer expertise, vehicle condition, and availability of proper tools and equipment.
Yes, taillight removal is required. Use a plastic pry tool to remove the plastic cover by each taillight, then use a T-30 Torx bit to remove the two screws securing each taillight housing.
Remove the following from the bumper fascia: two screws around each taillight area (using T-25 and T-30 Torx bits); four button head screws from the lower edge (T-25); four screws along the rear edge of each wheel well opening (T-25); and two screws behind the license plate (T-25). Also remove five screws from each exhaust heat shield (T-25).
Use an 18mm socket to remove eight M12 bolts securing the bumper beam to the vehicle. Return the beam and reinforcement plates to the vehicle owner. The hitch is then lifted into position where the bumper beam was, and the same bolts are reinstalled.
Yes, fascia trimming is required. Mark a 4" by 4" area centered on the lower bumper cover and along the lower edge. Use aviation shears or a knife to carefully trim this area. Hold the bumper cover in place on the vehicle to verify fitment and check that all wiring is clear before cutting. Trim more if needed to achieve proper fitment.
All M12 bolts securing the hitch to the vehicle must be torqued to 68 ft-lbs.
Safety glasses must be worn at all times while installing this product. Never exceed your vehicle manufacturer's recommended towing capacity. Before beginning installation, read all instructions thoroughly.
Periodic inspection of the trailer hitch should be performed to ensure all mounting hardware remains tight and structural components are secure. To help prevent damage to the product or vehicle, refer to the specified torque specifications when securing hardware.
Visit www.curtmfg.com for a full-color copy of the instruction manual, helpful videos, guides, and more. You can also call product support at 877.287.8634 or visit curtmfg.com/understanding-towing for towing safety information.
To register your purchase, get copies of product warranties, or provide feedback, visit warranty.curtgroup.com/surveys.
No, drilling is not required. The hitch uses the existing M12 bolt holes from the original bumper beam.
Torque all M12 bolts to 68 ft-lbs using a torque wrench.
Gross trailer weight capacity is 6,000 lbs and tongue weight capacity is 600 lbs. Never exceed your vehicle manufacturer's recommended towing capacity.
On Sale Today
Original price was $488.85. Current price is $360.71.You save $128.14 (26%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Thu, Sep 10 - Sun, Sep 13
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.