2023-2025 Honda HR-V All Class 1 Trailer Hitch, 1-1/4" Ball MountCURTOriginal price was $378.85. Current price is $285.92.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2023 - 2025 Honda HR-V
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2023-2025 Honda HR-V All
However you define adventure -- whether it's climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Honda HR-V (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2023, 2024, 2025 Honda HR-V All Class 1 Trailer Hitch, 1-1/4" Receiver, Select Honda HR-V
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2023 - 2025 | Honda HR-V | — |
The 2023-2025 Honda HR-V All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11640-001) fits 2023-2025 Honda HR-V models. The 2025 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 2023-2025 Honda HR-V All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11640-001) is designed to fit the 2023-2025 Honda HR-V.
The 2023-2025 Honda HR-V All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11640-001) fits the following vehicles: 2023-2025 Honda HR-V. Always verify your specific year, make, and model before ordering.
The 2023-2025 Honda HR-V All Class 1 Trailer Hitch, 1-1/4" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-11640-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The CURT 11640 has a gross trailer weight (GTW) capacity of 2,000 lbs and a tongue weight (TW) capacity of 200 lbs. Never exceed your vehicle manufacturer's recommended towing capacity.
The manual does not specify which vehicles are compatible with the CURT 11640. Contact CURT product support at 877.287.8634 or visit curtmfg.com to confirm fitment for your specific vehicle make, model, and year.
You will need: ratchet, flathead screwdriver, torque wrench, rotary tool, 12mm socket, 13mm socket, 3/4" socket, tape measure, and tape. For a tools reference guide, visit curtmfg.com/trailer-hitch-installation.
The kit includes: 1 trailer hitch, 1 carriage bolt (1/2" - 13 x 2"), 4 hex bolts (M8 - 1.25 x 40), 1 serrated-flange nut (1/2" - 13), 4 conical-toothed washers (3/8"), and 1 spacer (2.00" x 1.50" x .25").
You do not need to fully remove the bumper. You must remove the lower fascia panel by removing two push fasteners from the bottom, one push fastener from the middle of the bumper cover inside the bumper, and one screw from each end of the panel. After installation, you will trim and reinstall the bumper panel.
1. Remove the lower fascia panel (two push fasteners from bottom, one from middle of bumper cover, one screw from each end). 2. Remove the bottom two M8 bolts from each bumper beam connection. 3. Raise the hitch into position and loosely secure with M8 bolts and conical-toothed washers. 4. Install the 1/2" carriage bolt through the hitch, vehicle recovery loop, and spacer; secure with serrated flange nut. 5. Torque M8 hardware to 23 ft-lbs and 1/2" hardware to 90 ft-lbs. 6. Trim the bumper panel and reinstall.
Yes, bumper fascia trimming is required. After securing all hardware, trim the bumper panel using the trim diagram provided in the manual. The trim is centered on the bumper, with cuts 2" and 2-1/4" from the center reference point. After trimming, reinstall the bumper panel.
Torque the M8 hex bolts to 23 ft-lbs and the 1/2" carriage bolt and serrated-flange nut to 90 ft-lbs. Use a torque wrench to ensure proper tightness and prevent damage to the product or vehicle.
In Step 3, loosely secure the hitch with M8 bolts and conical-toothed washers. Do not fully tighten them until Step 5, after the carriage bolt and spacer assembly is complete. At Step 5, torque the M8 hardware to 23 ft-lbs and the 1/2" hardware to 90 ft-lbs.
The conical-toothed washers (4 included, 3/8" size) are used with the M8 hex bolts to secure the hitch to the vehicle frame. They should be oriented with the teeth facing the frame to provide a secure grip and prevent loosening. Install one washer under each of the four M8 bolts.
The spacer (2.00" x 1.50" x .25") is installed on the 1/2" carriage bolt between the vehicle recovery loop and the serrated-flange nut. It maintains proper spacing and alignment of the hitch assembly.
Wear safety glasses at all times while installing this product. Never exceed your vehicle manufacturer's recommended towing capacity. After installation, perform periodic inspections to ensure all mounting hardware remains tight and structural components are secure.
After installation, verify that all mounting hardware is tight and structural components are secure. Perform periodic inspections to ensure the hitch remains in proper condition. Refer to the final installed image in the manual to confirm the hitch is positioned correctly and the bumper panel is properly trimmed and reinstalled.
The manual specifies that periodic inspection of the trailer hitch should be performed to ensure all mounting hardware remains tight and structural components are secure. The manual does not specify the exact interval; consult curtmfg.com or contact product support at 877.287.8634 for recommended inspection schedules.
Vehicle compatibility is not specified in the manual. Contact CURT product support at 877.287.8634 or visit curtmfg.com to confirm fitment for your specific vehicle.
No drilling is required. The installation uses existing vehicle frame holes and bumper beam connections. Bumper fascia trimming is required using a rotary tool.
Torque M8 bolts to 23 ft-lbs and 1/2" hardware to 90 ft-lbs. Use a torque wrench to ensure proper tightness.
Gross trailer weight capacity is 2,000 lbs; tongue weight capacity is 200 lbs. Never exceed your vehicle manufacturer's recommended towing capacity.
Wear safety glasses at all times. Never exceed your vehicle manufacturer's recommended towing capacity. Perform periodic inspections to ensure all hardware remains tight.
On Sale Today
Original price was $382.85. Current price is $293.08.You save $89.77 (23%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Wed, Aug 12 - Sat, Aug 15
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.