Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2025 Lexus UX300h
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2025 Lexus UX300h All
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Lexus UX 250h (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 2,000 lbs. GTW and 300 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2025 Lexus UX300h All Class 3 Trailer Hitch, 2" Receiver, Select Lexus UX 250h
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2025 | Lexus UX300h | — |
Yes, the 2025 Lexus UX300h All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13583-003) is designed to fit the 2025 Lexus UX300h.
The 2025 Lexus UX300h All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13583-003) fits the following vehicles: 2025 Lexus UX300h. Always verify your specific year, make, and model before ordering.
The 2025 Lexus UX300h All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13583-003) fits 2025 Lexus UX300h models. The 2025 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2025 Lexus UX300h All CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13583-003) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The CURT 13583 has a gross trailer weight (GTW) capacity of 2,000 lbs and a tongue weight (TW) capacity of 300 lbs. Never exceed your vehicle manufacturer's recommended towing capacity.
The manual does not specify which vehicles, years, cab styles, bed lengths, or drivetrains the CURT 13583 is designed for. Contact CURT product support at 877-287-8634 or visit curtmfg.com to confirm fitment for your specific vehicle.
Required tools are: ratchet, die grinder, 19mm socket, socket extension (8"), torque wrench, safety glasses, flathead screwdriver or panel trim tool, utility knife, exhaust hanger removal pliers (or a 5/8" open-end wrench and pry bar as an alternative), and a cable tie. A full tools reference guide is available at curtmfg.com/trailer-hitch-installation.
The kit includes: 1 trailer hitch, 4 carriage bolts (1/2"-13 x 1-3/4"), 4 square-hole spacers (1/4" x 1" x 2-1/2"), 4 serrated-flange nuts (1/2"-13), 4 fishwire (1/2"), and 1 cable tie (15").
Not always. The manual states that if the exhaust does not allow adequate access to the forward-most access holes on each frame rail, it may be required to temporarily lower the exhaust using the exhaust hanger removal tool. If you need to lower it, you must reinstall it to its original position after pulling the forward carriage bolts and spacers into place.
You must remove: 5 plastic rivets from the driver side and 6 from the passenger side of the fascia, plastic retainers from the studs, 2 access hole covers from the passenger frame rail, and the plastic cover and carbon canister tube from the driver-side frame rail access holes. Save 2 plastic rivets to reinstall the fascia tab after the hitch is mounted.
The fishwire is a guide tool that helps you thread the carriage bolts and spacers through the frame rail access holes without losing them inside the frame. You attach the fishwire to the carriage bolt, pass it through the spacer, thread the bolt into the coil, kink the wire to keep the spacer separate, then pull the fishwire, spacer, and bolt through the frame and out the mounting hole. The manual provides two techniques: one for rear access holes and a reverse technique for forward access holes.
No drilling is required. However, you must use a die grinder to enlarge the forward-most access holes on each frame rail to allow the carriage bolts and spacers to pass through. If frame rail caulking interferes with installation, you may need to remove it using a utility knife.
All 1/2" fasteners (carriage bolts and serrated-flange nuts) must be torqued to 110 ft-lbs using a 19mm socket and torque wrench. This torque specification should be applied during the final assembly step after the hitch is centered on the vehicle.
Yes. After raising the hitch into position and centering it on the vehicle, you should loosely secure it with the provided 1/2" serrated-flange nuts. Only after the hitch is properly centered and all fasteners are in place should you torque all 1/2" fasteners to 110 ft-lbs.
The manual instructs you to raise the trailer hitch into position and center the hitch on the vehicle before loosely securing it with the serrated-flange nuts. Specific centering measurements or alignment marks are not provided in the manual.
1. Remove plastic rivets and retainers from fascia panels. 2. Remove access hole covers and plastic cover/carbon canister tube. 3. Enlarge forward-most access holes with die grinder (lower exhaust if needed). 4. Reinstall fascia flap with saved plastic rivets. 5. Use fishwire to pull rear carriage bolts and spacers into place. 6. Use reverse fishwire technique for forward carriage bolts and spacers; reinstall exhaust if lowered. 7. Raise hitch into position, center it, and loosely secure with serrated-flange nuts. 8. Torque all 1/2" fasteners to 110 ft-lbs. 9. Secure carbon canister tube with cable tie.
After torquing all fasteners, secure the carbon canister tube to the tab in the driver-side plate using the supplied 15" cable tie.
Safety glasses must be worn at all times while installing this product. Proper tools will improve the quality of installation and reduce the time required. Never exceed your vehicle manufacturer's recommended towing capacity.
Periodic inspection of the trailer hitch should be performed to ensure all mounting hardware remains tight and structural components are secure. The manual does not specify the inspection interval or detailed maintenance procedures.
The installation difficulty level is rated as Easy. However, the manual notes that installation difficulty levels are based on time and effort involved and may vary depending on the installer's level of expertise, the condition of the vehicle, and having proper tools and equipment.
Visit www.curtmfg.com for a full-color copy of the instruction manual, as well as helpful videos, guides and more. You can also contact CURT product support at 877-287-8634.
To register your purchase, get copies of product warranties, or provide feedback, visit warranty.curtgroup.com/surveys.
The manual does not specify vehicle compatibility. Contact CURT at 877-287-8634 or visit curtmfg.com to confirm fitment for your specific make, model, and year.
All 1/2" fasteners must be torqued to 110 ft-lbs using a 19mm socket and torque wrench.
Gross trailer weight capacity is 2,000 lbs; tongue weight capacity is 300 lbs. Never exceed your vehicle manufacturer's recommended towing capacity.
Wear safety glasses at all times during installation. Never exceed your vehicle manufacturer's recommended towing capacity.
On Sale Today
Original price was $541.85. Current price is $394.71.You save $147.14 (27%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 8 - Tue, Aug 11
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.