91-95 KIA KIA YJ, excluding Renegade CURT 4-flat Plug and Play Trailer WiringCURT$71.76In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Warranty | One-Year Limited Warranty |
| Electrical System Type | 2W |
| Finish | N/A |
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
| Side Application Type Description | Blank |
| T-Connector Location | S5,S7 |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 1991 - 1995 | Jeep Wrangler | YJ, excluding Renegade |
The 91-95 JEEP Wrangler YJ, excluding Renegade CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1580) fits the following vehicles: 1991-1995 Jeep Wrangler. Always verify your specific year, make, and model before ordering.
The 91-95 JEEP Wrangler YJ, excluding Renegade CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1580) fits 1991-1995 Jeep Wrangler models. The 1995 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 91-95 JEEP Wrangler YJ, excluding Renegade CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1580) is designed to fit the 1991-1995 Jeep Wrangler.
The 91-95 JEEP Wrangler YJ, excluding Renegade CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1580) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the Curt 55356 is designed for Jeep Wrangler and Jeep TJ (Canada). It is also compatible with SUVs, mini and full-sized vans. Confirm your specific vehicle model matches these applications before purchasing.
The Curt 55356 is a custom wiring harness that connects your vehicle's taillight wiring to a trailer connector. It allows you to safely power trailer lights from your vehicle's electrical system.
The manual lists 'Tools Needed' as N/A, meaning no special tools are required for installation. However, you will need a test light or a properly wired trailer to test the harness after installation.
The harness includes a screw and ring terminal for grounding the white ground wire, and a 4-flat dust cover to help prevent corrosion.
The manual does not specify whether battery disconnection is required. Contact Curt Manufacturing or your vehicle manufacturer for guidance on this step.
The vehicle taillight wiring harness connectors are located underneath the vehicle next to the rear bumper, behind the protective covers. The driver-side connector is on the driver side, and the passenger-side connector is on the passenger side.
First, remove the protective covers under the vehicle next to the rear bumper. Locate the vehicle taillight wiring harness connectors and carefully separate them from the taillight housing without damaging the locking tabs. Insert the custom harness end with the yellow wire between the separated connectors on the driver side, ensuring the connectors are fully inserted with locking tabs in place. Repeat this process on the passenger side using the custom harness end with the green wire.
The yellow wire connects to the driver-side taillight connector, the green wire connects to the passenger-side taillight connector, and the white wire is the ground wire that must be secured to a suitable grounding point on the vehicle frame.
Drilling may be required for the ground wire. If a suitable grounding point with an existing screw and nut is not available on the vehicle frame near the connector, you will need to drill a 3/32" pilot hole for the provided screw. The area must be free of rust, dirt and paint before securing the ground wire.
Drill a 3/32" pilot hole for the provided ground screw if an existing screw with nut is not available on the vehicle frame.
Do not exceed the product rating or the tow vehicle lamp load rating, whichever is lower. Exceeding the rating can cause loss of warranty, overheating and potential fire. Refer to your vehicle owner's manual or contact the vehicle manufacturer for the specific lamp load rating.
After installation, test the wiring harness for proper function using a test light or by connecting a properly wired trailer. All steps must be followed to ensure the harness functions properly.
After connecting the harness, locate a suitable grounding point near the connector, such as an existing screw with nut in the vehicle frame. If one is not available, drill a 3/32" pilot hole in an area free of rust, dirt and paint. Secure the white ground wire using the ring terminal and provided screw. Then reinstall all items removed during installation and install the provided 4-flat dust cover to help prevent corrosion.
Before drilling, check for miscellaneous items that may be hidden behind or under any surface to avoid damage and personal injury.
When separating the vehicle taillight wiring harness connectors from the taillight housing, take care not to damage the locking tabs. When inserting the custom harness connectors, ensure they are fully inserted with locking tabs in place.
The Curt 55356 is designed for Jeep Wrangler, Jeep TJ (Canada), and SUVs, mini and full-sized vans. Confirm your vehicle model matches these applications.
No special tools are required. You will need a test light or properly wired trailer to test the harness after installation.
Do not exceed the product rating or tow vehicle lamp load rating, whichever is lower. Exceeding the rating can cause loss of warranty, overheating and potential fire.
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Thu, Aug 13 - Sun, Aug 16
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 4 items:
$147.71
No reviews have been added for this product.
