Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
1993 - 1998 Toyota T100
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
This custom kit fits the following vehicles:
All Hardware and Installation Instructions Included!
Each CURT class 3 hitch is engineered to fit on a specific vehicle. This provides the best possible fit and easiest installation. This particular custom class 3 hitch fits specific years of the Toyota T100 (to verify vehicle compatibility, see the CURT application guide or use the Vehicle Lookup tool). It is designed to integrate with the vehicle's existing features and offer a reliable connection to your trailer. This Toyota T100 hitch is stringently tested in accordance with SAE J684 to ensure a weight carrying capacity of 5,000 lbs. gross trailer weight and 500 lbs. tongue weight. It is compatible with a weight distribution hitch to provide more stable towing and a weight distribution rating of 5,500 lbs. WD and 550 lbs. WDTW. It also features a 2" receiver tube opening to accept ball mount or other hitch accessory with a 2" x 2" shank. From class 1 to class 5, all CURT custom-fit receiver hitches are made in the USA to ensure quality from design to finish (may include imported hardware). They are designed with hands-on engineering for a precise fit. They are welded using a combination of manual and robotic operations for speed and accuracy. Finally, they are finished with our unique co-curing process. Each hitch is dipped in a liquid A-coat for rust prevention, inside and out, and then co-cured in a durable black powder coat finish for maximum rust, chip and UV resistance.
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness -- also called a T-connector -- is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Toyota Tacoma, T100 and Hilux (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination -- maybe it's the boat landing at your favorite fishing spot, maybe it's a campsite that overlooks one of nature's masterpieces, or maybe it's the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 1993 - 1998 | Toyota T100 | — |
Yes, the 93 - 98 Toyota T100 Curt 2" Class 3 Trailer Tow Hitch + 5-Flat Wiring Kit Tow Boat/Utility Trailer with Surge Brakes 13196 (Part #5W-CHW-2949) is designed to fit the 1993-1998 Toyota T100.
The 93 - 98 Toyota T100 Curt 2" Class 3 Trailer Tow Hitch + 5-Flat Wiring Kit Tow Boat/Utility Trailer with Surge Brakes 13196 (Part #5W-CHW-2949) fits the following vehicles: 1993-1998 Toyota T100. Always verify your specific year, make, and model before ordering.
The 93 - 98 Toyota T100 Curt 2" Class 3 Trailer Tow Hitch + 5-Flat Wiring Kit Tow Boat/Utility Trailer with Surge Brakes 13196 (Part #5W-CHW-2949) fits 1993-1998 Toyota T100 models. The 1998 model year is the last year covered by this part number. For newer models, check for an updated version.
The 93 - 98 Toyota T100 Curt 2" Class 3 Trailer Tow Hitch + 5-Flat Wiring Kit Tow Boat/Utility Trailer with Surge Brakes 13196 (Part #5W-CHW-2949) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the Curt 55513 is designed for Toyota Tacoma pickup trucks. The installation process for Tacoma involves removing the 10mm screws holding the taillights in place and routing the harness end with the green wire through the hole between the vehicle bumper and body.
Yes, the Curt 55513 is compatible with the Toyota T-100. The T-100 installation differs from the Tacoma: the wiring harness has connection points on the driver and passenger side of the frame, and the harness is routed to the passenger side without requiring taillight removal.
Yes, the Curt 55513 is listed as compatible with the Toyota Hilux (Mexican vehicle).
The Curt 55513 has a Signal Circuits rating of 3.0 amps per side and a Tail/Running Circuits rating of 7.5 amps total. Do not exceed these ratings or your tow vehicle's lamp load rating, whichever is lower, as exceeding the product rating can cause loss of warranty, overheating and potential fire.
You will need a 10mm socket and ratchet. These are required to remove the taillights on Toyota Tacoma models during installation.
Yes, you must disconnect the negative battery terminal before beginning installation. This is the first step in the installation process.
Separate the connectors from the taillight housing, taking care not to damage the locking tabs. Insert the custom wiring harness end with the yellow wire between the separated connectors. Make sure the connectors are fully inserted with locking tabs in place. Repeat this process on the passenger side using the harness end with the green wire.
The harness has a yellow wire end for the driver side connection and a green wire end for the passenger side connection. The harness also includes a white ground wire that must be secured to a grounding point.
You should first locate a suitable grounding point near the connector, such as an existing screw with nut in the vehicle frame. If no suitable existing screw is available, you may drill a 3/32" pilot hole for the provided screw. Before drilling, check for miscellaneous items that may be hidden behind or under any surface to avoid damage and personal injury.
Locate a suitable grounding point near the connector, such as an existing screw with nut in the vehicle frame, or drill a 3/32" pilot hole for the provided screw. The area must be free of rust, dirt and paint. Secure the white ground wire using the ring terminal and the provided screw.
Locate a flat spot inside the vehicle, near the taillight, and adhere the black converter box using the provided double-sided tape.
The provided 4-flat dust cover helps prevent corrosion and should be installed after all other installation steps are complete.
Test for proper function by using a test light or connecting a properly wired trailer. All steps must be followed to ensure the wiring harness will function properly.
Exceeding the product rating can cause loss of warranty, overheating and potential fire. Do not exceed the product rating (Signal Circuits 3.0 amps per side, Tail/Running Circuits 7.5 amps total) or your tow vehicle's lamp load rating, whichever is lower.
For the Tacoma, route the custom wiring harness end with the green wire to the passenger side out through the hole between the vehicle bumper and body.
For the T-100, route the custom wiring harness end with the green wire to the passenger side. The T-100 has connection points on the driver and passenger side of the frame.
The Curt 55513 fits Toyota Hilux (Mexican vehicle), Toyota T-100, and Toyota Tacoma pickup trucks.
You need a 10mm socket and ratchet.
Yes, disconnect the negative battery terminal before starting installation.
Signal Circuits: 3.0 amps per side. Tail/Running Circuits: 7.5 amps total. Do not exceed these ratings or your vehicle's lamp load rating, whichever is lower.
Drilling is not always required. You should first locate an existing screw with nut in the vehicle frame for grounding. Only if no suitable existing screw is available should you drill a 3/32" pilot hole.
On Sale Today
Original price was $675.75. Current price is $489.60.You save $186.15 (28%)
Free Shipping
Ships free on all orders
Authorized Dealer
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 15 - Tue, Aug 18
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.